1. Introduction
The Autel MaxiCOM MK808K-BT is an advanced automotive diagnostic tool designed to quickly read and clear Diagnostic Trouble Codes (DTCs) for all available modules in a wide range of vehicle makes and models. It offers superior special functions including Oil Reset, Electronic Parking Brake (EPB), Steering Angle Sensor (SAS), and Battery Management System (BMS). Additionally, the MK808K-BT provides comprehensive Tire Pressure Monitoring System (TPMS) services.
This manual describes the construction and operation of the MaxiCOM MK808K-BT tablet and its accompanying MaxiVCI Mini, detailing how they work together to provide effective diagnostic solutions.
1.1 Trademarks and Copyright
Autel®, MaxiSys®, MaxiDAS®, MaxiPRO®, MaxiRecorder®, MaxiCOM®, MaxiTPMS®, and MaxiCheck® are registered trademarks of Autel Intelligent Technology Corp., Ltd. All other marks are trademarks or registered trademarks of their respective holders.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the prior written permission of Autel.
1.2 Disclaimer of Warranties and Limitation of Liabilities
All information, specifications, and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. While information has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents. Autel will not be liable for any direct, special, incidental, or indirect damages resulting from the use of this product.
1.3 Important Safety Information
For your own safety and the safety of others, and to prevent damage to the device and vehicles, it is crucial to read and understand all safety instructions in this manual. Always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders.
1.3.1 General Safety Warnings
- When an engine is operating, ensure the service area is WELL VENTILATED or use an exhaust removal system. Engines produce carbon monoxide, a poisonous gas.
- Always perform automotive testing in a safe environment.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area.
- Put the transmission in PARK (automatic) or NEUTRAL (manual) and engage the parking brake.
- Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Be extra cautious around ignition components (coil, distributor cap, wires, spark plugs) as they create hazardous voltages.
- Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Keep the test equipment dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
- Do not drive the vehicle and operate the test equipment at the same time.
- Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions.
- To avoid damaging the test equipment or generating false data, ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.
- Do not place the test equipment on the distributor of the vehicle, as strong electro-magnetic interference can damage it.
2. Product Components
The MaxiCOM MK808K-BT system consists of two main components: the MaxiCOM MK808K-BT Tablet and the MaxiVCI Mini.
2.1 MaxiCOM MK808K-BT Tablet
The tablet serves as the central processor and monitor for the system. It features a 7-inch LCD touchscreen with 1024x600 resolution, powered by an Android 11.0 operating system and a 4-core/1.8GHz processor. It includes 4GB RAM and 64GB ROM for efficient operation and data storage.

2.1.1 Tablet Front View Features
- 7.0" LCD Touchscreen: Main display for all operations.
- Ambient Light Sensor: Detects ambient brightness for automatic screen adjustment.
- Power LED: Indicates battery level, charging status, and system status.
- TPMS Service Symbol: Indicates the position of the embedded TPMS antenna.
2.1.2 Power LED Indicators
- Green: Illuminates when charging (battery > 90%) or powered on (battery > 15%).
- Yellow: Illuminates when charging (battery < 90%).
- Red: Illuminates when powered on (battery < 15%) or if an abnormality occurs during power-on/charging.
2.1.3 Tablet Back View Features

- Collapsible Stand: Extends from the back for hands-free viewing.
- Heat Sink: Manages device temperature.
- MaxiVCI Mini Holder: Securely holds the MaxiVCI Mini.
2.1.4 Tablet Top View Features
- Micro SD Card Slot: Supports up to 64 GB Micro SD card.
- HDMI Port: High-Definition Multimedia Interface.
- USB Port: For data transfer and charging.
- Power/Lock Button: Long press to turn on/off, short press to lock screen.
2.2 MaxiVCI Mini
The MaxiVCI Mini is a small vehicle communication interface (VCI) that wirelessly connects to the tablet via Bluetooth or a Mini USB cable. It facilitates data transmission between the tablet and the vehicle's Data Link Connector (DLC).

2.2.1 MaxiVCI Mini Features
- Vehicle Data Connector (16-Pin): Connects to the vehicle's 16-pin DLC.
- Power LED: Indicates power status (solid green when powered on, flashes red for system failure).
- Connection LED: Indicates communication status (solid green for USB connection, flashes green for USB communication; solid blue for Bluetooth connection, flashes blue for Bluetooth communication).
- Mini USB Port: For wired connection to the tablet.
3. Technical Specifications
3.1 MaxiCOM MK808K-BT Tablet Specifications
| Item | Description |
|---|---|
| Recommended Use | Indoor |
| Operating System | Android™ 11 |
| Processor | RK3566 Quad-core Arm Cortex-A55 processor (1.8 GHz) |
| Memory | 4GB RAM & 64GB ROM |
| Display | 7-inch LCD screen with 1024x600 resolution |
| Connectivity | Mini USB 2.0, USB 2.0, Wi-Fi, Bluetooth, HDMI Type A, Micro SD card (supports up to 64 GB) |
| Sensor | Ambient light sensor for brightness auto changing |
| Audio Input/Output | Input: N/A, Output: buzzer |
| Power and Battery | 3.7 V/5000 mAh lithium-polymer battery, Charges via 5 V DC power supply |
| Tested Battery Life | Around 6.5 hours of continuous use |
| Battery Charging Input | 5 V/2 A |
| Power Consumption | Approx. 600 mA (LCD on with default brightness, Wi-Fi on) @3.7 V |
| Operating Temp. | 0 to 50 °C (32 to 122 °F) |
| Storage Temp. | -10 to 60 °C (14 to 140 °F) |
| Operating Humidity | 5% to 95% non-condensing |
| Dimensions (W x H x D) | 270.8 mm (10.0") x 176.0 mm (6.9") x 36.0 mm (1.4") |
| Net Weight | 885 g (2.31 lbs.) |
| Protocols | ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO11898 (High-speed, Middle-speed, Low-speed and Single-wire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 |
3.2 MaxiVCI Mini Specifications
| Item | Description |
|---|---|
| Communications | BT V.2.1 + EDR, Mini USB 2.0 |
| Wireless Frequency | 2.4 GHz |
| Input Voltage Range | 12 V DC to 24 V DC |
| Supply Current | 150 mA @ 12 V DC |
| Operating Temp. | 0 to 50 °C (32 to 122 °F) |
| Storage Temp. | -10 to 60 °C (14 to 140 °F) |
| Dimensions (L x W x H) | 47 mm (1.7") x 23 mm (0.9") x 51 mm (2.0") |
| Weight | 33.1 g (0.07 lbs.) |
4. Getting Started and Setup
This section guides you through the initial setup of your MaxiCOM MK808K-BT tablet and MaxiVCI Mini.
4.1 Powering Up the Tablet
Ensure the tablet is sufficiently charged or connected to an external power supply.
- Long press the Power/Lock button on the top-right side of the tablet.
- The power LED will illuminate green.
- The system will boot up and display the lock screen. Slide the screen up to enter the MaxiCOM Job Menu.
NOTE
The tablet screen is locked by default when first powered on. It is recommended to lock the screen to protect system information and conserve power.
4.2 Establishing Vehicle Communication
Before performing any diagnostic functions, the tablet must be connected to the test vehicle via the MaxiVCI Mini.
4.2.1 Vehicle Connection
- Insert the 16-pin vehicle data connector of the MaxiVCI Mini into the vehicle's Data Link Connector (DLC). The DLC is usually located under the vehicle dashboard.
- The MaxiVCI Mini will automatically power on.
NOTE
The vehicle's DLC is not always located under the dashboard. Refer to the vehicle's user manual for DLC location.
4.2.2 VCI Connection (Tablet to MaxiVCI Mini)
The MaxiVCI Mini supports two communication methods with the tablet: Bluetooth or Mini USB Cable Connection. The Power LED on the MaxiVCI Mini will light solid green when properly connected to the vehicle and ready to establish communication with the tablet.
4.2.2.1 Bluetooth Connection
Bluetooth pairing is the recommended method for communication due to its convenience and efficiency, allowing remote vehicle diagnostics up to 33 feet (10 meters).
- Power on the tablet.
- Insert the MaxiVCI Mini into the vehicle's DLC.
- Tap the VCI Manager application on the MaxiCOM Job Menu.
- Select VCI BT from the Connection Mode list.
- Tap the Scan button at the top-right corner to search for available pairing units.
- Select the appropriate device (e.g., "Maxi-" suffixed with a serial number).
- Once pairing is successful, the connection status will show "Connected", and the BT badge will display on the VCI Manager shortcut.
NOTE
A MaxiVCI Mini can only be connected to one tablet at a time. Once connected, it will not be discoverable to other devices.
4.2.2.2 Mini USB Cable Connection
Use the provided Mini USB cable to connect the tablet to the MaxiVCI Mini. An USB cable badge will display at the bottom-right corner of the VCI Manager shortcut, and the Connection LED on MaxiVCI Mini will light solid green when the connection is successful.
4.2.3 No Communication Message
If an "Error" message displays, indicating the tablet cannot access the vehicle control module, perform the following checks:
- Check if the MaxiVCI Mini is powered up and properly positioned.
- Verify the Connection LED on the MaxiVCI Mini is illuminated for Bluetooth or Mini USB cable connection.
- For Bluetooth connections, ensure the network is configured correctly and the right MaxiVCI Mini is paired. If communication is interrupted, check for signal obstructions or move closer to the MaxiVCI Mini.
- For Mini USB cable connections, check the cable connection between the tablet and the MaxiVCI Mini.
- If the Power LED on the MaxiVCI Mini is flashing red, it indicates a hardware problem. Contact technical support.
5. Operation
The MaxiCOM MK808K-BT offers a wide range of diagnostic and service functions. This section details how to navigate and utilize these features.
5.1 Vehicle Identification
The MaxiCOM diagnostics system supports four methods for vehicle identification:
5.1.1 Auto Detect
This function identifies vehicles and scans all diagnosable ECUs using VIN-based auto-detection. It is compatible with 2006 and newer vehicles.
- Tap the Diagnostics application button from the MaxiCOM Job Menu.
- Tap the VID button on the top toolbar to open the dropdown list.
- Select Auto Detect. Once the vehicle VIN is identified, tap OK to confirm. If the VIN does not match, enter it manually or tap Read to acquire it again.
- The tool will establish communication and read control unit information. Choose Auto Scan to scan all available systems or Control Unit to access a specific system.
5.1.2 Manual Input
For vehicles not supporting Auto Detect, you can manually enter the VIN.
- Tap the Diagnostics application button from the MaxiCOM Job Menu.
- Tap the VID button on the top toolbar.
- Select Manual Input.
- Enter the correct VIN into the input box and tap OK.
5.1.3 Automatic Selection
The vehicle VIN can also be automatically acquired after selecting a vehicle manufacturer.
- Tap the Diagnostics application button from the MaxiCOM Job Menu.
- Select a vehicle manufacturer.
- Tap Automatic Selection. The VIN information will be acquired automatically.
5.2 Diagnostic Functions
The Diagnostics application retrieves ECU information, reads and erases DTCs, and views live data for various vehicle control systems (engine, transmission, ABS, SRS).
5.2.1 ECU Information
This function retrieves and displays specific information for the tested control unit, including unit type, version numbers, and other specifications.
5.2.2 Trouble Codes (DTCs)
This function retrieves and displays DTCs from the vehicle's control system. It includes:
- Read Codes: Displays detailed DTC information. Freeze frame data may also be retrieved.
- Erase Codes: Clears all emissions-related diagnostic data, including DTCs and freeze frame data, after repairs.
5.2.3 Live Data
This function displays real-time PID data from the ECU, including analog inputs/outputs, digital inputs/outputs, and system status information. Data can be viewed in various display modes (Text, Analog Gauge, Waveform Graph, Digital Gauge).
5.2.4 Active Test (Bi-directional Control)
The Active Test function allows the tablet to send commands to the ECU to activate actuators, determining the integrity of the system or part. This includes testing components like radiator fans, door lock actuators, injectors, and more.

5.2.5 Special Functions
These functions perform various component adaptations, recalibrations, or configurations after repairs or replacements, such as brake pedal position sensor learn, fuel pump trim reset, and engine oil life reset.
5.3 Generic OBDII Operations
This option provides a quick way to check for DTCs, isolate MIL causes, check monitor status for emissions, verify repairs, and perform other emissions-related services for OBDII/EOBD compliant vehicles.
5.4 Service Functions
The Service application provides quick access to scheduled service and maintenance tasks.

5.4.1 Oil Reset Service
Resets the Engine Oil Life system after an oil change, allowing the system to calculate the next optimal oil change interval.
5.4.2 Electric Parking Brake (EPB) Service
Maintains the electronic braking system, including deactivating/activating the brake control system, assisting with brake fluid control, and setting brakes after disc/pad replacement.
DANGER
When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life.
5.4.3 Tire Pressure Monitoring System (TPMS) Service
Looks up tire sensor IDs, performs TPMS replacement, and resets procedures after sensor replacement.
5.4.4 Battery Management System (BMS) Service
Evaluates battery charge state, monitors close-circuit current, registers battery replacement, activates vehicle rest state, and charges the battery via the diagnostic socket.
5.4.5 Steering Angle Sensor (SAS) Service
Calibrates the steering angle sensor to store the current steering wheel position as the straight-ahead position. Required after steering wheel replacement, sensor replacement, or steering system maintenance.
5.4.6 Diesel Particle Filter (DPF) Service
Manages DPF regeneration, DPF component teach-in, and DPF teach-in after replacing the engine control unit.
5.4.7 Immobilizer (IMMO) Service
Disables a lost vehicle key and programs replacement key fobs. This anti-theft mechanism prevents the engine from starting without the correct ignition key.
5.5 TPMS Service Functions
The TPMS application is used to check sensor conditions, program MX-Sensors, and perform TPMS Relearn procedures.
5.5.1 TPMS Check
Activates TPMS sensors to view sensor data (ID, tire pressure, temperature, battery status, frequency) and sends data to the vehicle's ECU for learning sensor positions.
5.5.2 TPMS Diagnostics
Checks the status of the TPMS system, displaying diagnostic results and DTCs if present.
5.5.3 Sensor Programming
Programs sensor data to MX-Sensors to replace faulty sensors. Options include:
- Copy by Activation: Copies retrieved sensor ID from an activated sensor to a new MX-Sensor.
- Copy by OBD: Programs sensor IDs retrieved from the vehicle's ECU to new MX-Sensors.
- Copy by Input: Programs a new MX-Sensor with the ID of an original TPMS sensor by manual input.
- Auto Create 1-20 Sensors: Automatically creates random sensor IDs to program new MX-Sensors.
5.5.4 TPMS Relearn
Writes newly programmed sensor IDs into the vehicle ECU for sensor recognition. Methods include:
- OBD Relearn: Completed via OBD diagnostic function without driving.
- Automatic Relearn: Requires driving to complete, sometimes after following on-screen learning process guides.
- Stationary Relearn: Completed without driving or OBD diagnostics, often requiring specific operations to enter relearn mode.
- Copy Relearn: Clones sensor ID and tire location.
5.5.5 TPMS by OEM Part NO.
If the sensor's OEM part number is known, this function efficiently activates and programs MX-Sensors. Ideal for workshop and tire shop scenarios.
5.6 Toolkit
This section describes auxiliary functions for TPMS service and vehicle diagnostics.
- RKE & RF: Checks signal strength of 315 and 433 MHz frequencies of remote keyless entry fobs.
- Unlock REDI7002A: Unlocks the specified Redi-sensor.
- Sleep | Park Mode: Wakes and sets OEM sensors to Park Mode.
5.7 TPMS Retrofit
This function is used to install a TPMS system in vehicles that were not originally equipped with one. Follow on-screen instructions to perform backup, retrofit, restore, program Autel ECU, Autel ECU Relearn, and service functions.
5.8 Update
The Update application downloads the latest software versions, improving MaxiCOM applications' capabilities, adding new tests, model coverage, or enhanced applications. The tablet automatically searches for updates when connected to the Internet.
5.9 Data Manager
The Data Manager application allows you to store, print, and review saved files, manage workshop and customer information, and keep test vehicle records.
- Vehicle History: Stores test vehicle records and provides direct access to previously tested vehicles.
- Workshop Information: Allows editing and saving of workshop details for diagnostic reports.
- Customer: Creates and edits customer accounts, correlated with test vehicle history records.
- Image: A PNG database containing all captured screenshots.
- Report: Stores and displays all diagnostic reports, with options to upload to cloud or share.
- PDF Files: Stores and displays all PDF files of saved data.
- Review Data: Plays back recorded data frames of live data streams.
- Data Logging: Launches the Support platform to view feedback or data loggings.
- Uninstall Apps: Manages installed firmware applications.
5.10 Settings
The Settings menu adjusts default settings and displays MaxiCOM system information.
- Unit: Adjusts measurement units (Metric or English).
- Language: Adjusts display language.
- Printing Settings: Configures tablet to print via network or PC Link.
- Report Settings: Manages automatic synchronization and upload of diagnostic reports to the cloud.
- Push Notifications: Manages notifications.
- Auto Update: Configures automatic updates for OS, MaxiCOM system, and vehicle coverage software.
- TPMS Market: Sets TPMS market region.
- TPMS Prog. Setting: Sets TPS program pressure limit.
- Vehicle List: Sorts vehicles by alphabetical order or frequency of use.
- System Settings: Provides direct access to Android system settings.
- About: Displays product name, version, hardware, and serial number.
5.11 VCI Manager
This application pairs the tablet with the MaxiVCI Mini, checks communication status, and updates VCI firmware.
- VCI Bluetooth Pairing: Pairs the MaxiVCI Mini with the tablet via Bluetooth.
- BAS Bluetooth Pairing: Pairs the BT506 battery tester device with the tablet via Bluetooth.
- VCI Update: Updates MaxiVCI Mini firmware via tablet or PC.
- BAS Update: Updates BT506 battery tester firmware via tablet.
5.12 Battery Test
The Battery Test application performs in-vehicle and out-vehicle battery tests using the BT506 battery tester (purchased separately) to view the health status of the vehicle's battery and electrical system.
5.12.1 Test Preparation
Before testing, inspect the battery for cracking, buckling, leaking, corroded/loose cables, and dirt/acid on the case top. Clean as necessary.
5.12.2 In-vehicle Test
Tests batteries installed in a vehicle, including Battery Test, Starter Test, and Generator Test.
5.12.3 Out-vehicle Test
Tests batteries not connected to a vehicle to check their health status.
5.13 Remote Desktop
Launches the TeamViewer QuickSupport program for remote support from Autel's support center or other parties.
5.14 MaxiViewer
Allows searching for functions supported by Autel tools and software version information, either by tool/vehicle or by function.
5.15 MaxiVideo
Configures the MaxiCOM tablet as a digital video scope by connecting to a MaxiVideo Camera (optional accessory) for inspecting difficult-to-reach areas.
6. Maintenance
To ensure optimal performance and longevity of your MaxiCOM diagnostic tablet, follow these maintenance instructions:
- Clean the touchscreen with a soft cloth and alcohol or a mild window cleaner.
- Do not use abrasive cleansers, detergents, or automotive chemicals.
- Keep devices dry and within normal operating temperatures.
- Ensure hands are dry before using the tablet.
- Avoid storing the device in humid, dusty, or dirty areas.
- Check housing, wiring, and connectors for dirt and damage before and after each use.
- Wipe device housing, wiring, and connectors clean with a damp cloth after use.
- Do not attempt to disassemble the tablet.
- Avoid dropping or severe impact to the devices.
- Use only authorized battery chargers and accessories.
- Ensure the battery charger does not contact conductive objects.
- Do not use the tablet near microwave ovens, cordless phones, or medical/scientific instruments to prevent signal interference.
7. Troubleshooting Checklist
If you encounter issues with your MaxiCOM MK808K-BT, refer to this checklist:
7.1 Tablet Not Working Properly
- Ensure the tablet is registered online.
- Verify system software and diagnostic application software are updated.
- Check all cables, connections, and indicators for proper signal reception.
- Ensure the tablet is connected to the Internet.
7.2 Shorter Battery Life
- This may occur in areas with low Wi-Fi signal strength. Turn off the device when not in use.
- Battery life inevitably shortens over time.
7.3 Tablet Cannot Be Turned On
- Ensure the tablet is connected to a power source or the battery is charged.
7.4 Unable to Charge Tablet
- Check if your charger is out of order.
- Avoid charging in overly hot/cold temperatures.
- Ensure the device is properly connected to the charger.
NOTE
If problems persist, contact Autel's technical support personnel or your local selling agent.
7.5 About Battery Usage
The tablet is powered by a built-in Lithium-ion Polymer battery. You can recharge it even if some charge remains without reducing its autonomy.
DANGER
The built-in Lithium-ion Polymer battery is factory replaceable only; incorrect replacement or tampering may cause an explosion. Do not use a damaged battery charger. Do not disassemble, crush, bend, deform, puncture, shred, modify, or remanufacture the battery. Do not insert foreign objects into the battery or expose it to fire, explosion, or other hazards.
- Use only the charger and USB cables provided with the package.
- Avoid dropping the tablet. If dropped, take it to a service center for inspection.
- Move the tablet closer to your network's base station to improve battery life.
- Battery recharging time varies. Unplug the charger once fully charged to prevent shortening battery life.
- Avoid leaving the tablet in hot or cold places, especially inside a vehicle.
8. User Tips
Here are some helpful tips from other users to enhance your experience with the Autel MaxiCOM MK808K-BT:
- Efficient Diagnostics: The device is known for its fast and responsive operation. Leverage its powerful processor for quicker diagnostic sessions.
- Wireless Freedom: Take full advantage of the 33ft Bluetooth range to perform diagnostics comfortably away from the vehicle.
- Stay Updated: Regularly update the software to ensure compatibility with the latest vehicle models and access newly released features and functions.
- Battery Management: Always ensure the device is fully charged before starting a full day's work to avoid interruptions. The battery typically lasts for a good duration.
- Pinpoint Issues with Active Tests: Utilize the active test feature to directly control vehicle components. This is highly effective for quickly identifying and confirming faults.
- Comprehensive TPMS: Explore all the TPMS programming and relearn options. Users find these functions particularly useful for efficient tire maintenance and sensor replacement.
9. Support and Service
This section provides information on technical support, product registration, and other services.
9.1 Product Registration
To access the Support platform and obtain updates and other services from Autel, you must register your MaxiCOM tablet the first time you use it.
- Visit the website: pro.autel.com.
- Sign in with your Autel account or register for a new Autel ID.
- Enter required personal information, email address (for verification code), and set a password.
- Read and accept the Autel User Service Agreement and Privacy Policy.
- Enter your tool's serial number and password (found in Settings > About on the tablet) and the CAPTCHA code to complete registration.
9.2 Support Screen Layout
The Support application interface is navigated via the Home button on the Top Toolbar. The main section is divided into two sections: a main menu on the left and the corresponding function screen on the right.
9.2.1 My Account
Displays comprehensive user and product information synchronized with your online registered account.
9.2.2 Data Logging
Keeps records of all submitted and saved feedback data loggings. You can edit and send test records to Autel support personnel.
9.2.3 Training
Provides quick links to Autel's online video library for product usage techniques and vehicle diagnostics practice.
9.2.4 FAQ
Offers comprehensive references for frequently asked questions about Autel's online member account, shopping, and payment procedures.
9.3 Technical Support Contact Information
For technical assistance, please contact Autel support:
Autel North America
- Phone: 1-855-AUTEL-US (1-855-288-3587) (Monday-Friday, 9AM-9PM Eastern Time)
- Fax: (631) 357-3304
- Email: ussupport@autel.com
- Address: 36 Harbor Park Drive, Port Washington, New York, USA 11050
- Web: www.autel.com
Autel Europe
- Phone: +49(0)89 540299608 (Monday-Friday, 9:00AM-6:00PM Berlin Time)
- Email: support.eu@autel.com
- Address: Landsberger Str. 408, 4. OG, 81241 München, Germany
- Web: www.autel.eu
China Headquarters
- Phone: 0086-755-2267-2493 (Monday-Friday, 9:00AM-6:00PM Beijing Time)
- Email: sales@auteltech.net; support@autel.com
- Address: 7th, 8th and 10th Floor, Building B1, Zhiyuan, Xueyuan Road, Xili, Nanshan, Shenzhen, 518055, China
- Fax: 0086-755-8614-7779
- Web: www.auteltech.cn
Autel Latin America
- Phone: +52 33 1001 7880 (Spanish in Mexico), +55 19 97816 4911 (Portuguese in Brazil)
- Email: latsupport@autel.com (in Mexico); brsupport@autel.com (in Brazil)
- Address: Avenida Americas 1905, 6B, Colonia Aldrete, Guadalajara, Jalisco, Mexico
- Web: www.autel.com
Autel APAC
- Phone: +81-045-548-6282 (in Japan)
- Email: sales.jp@autel.com; support.jp@autel.com
- Address: 6TH FLOOR, ARI- NADORIBIRU 3-7-7, SHIN-YOKOHAMA, KOUHOKU-KU, YOKOHAMA-SHI, KANAGAWA-KEN, 222-0033 JAPAN
- Web: www.autel.com/jp/
Autel IMEA DMCC
- Phone: +971 585 002709 (in UAE)
- Email: sales.imea@autel.com; imea-support@autel.com
- Address: 906-17, Preatoni Tower (Cluster L), Jumeirah Lakes Tower, DMCC, Dubai, UAE
- Web: www.autel.com
For technical assistance in other markets, please contact your local Autel selling agent.
9.4 Repair Service
If your device requires repair, download the repair service form from www.autel.com and fill it in. Include contact name, return address, telephone number, product name, complete description of the problem, proof-of-purchase, and preferred payment method for non-warranty repairs.
NOTE
For non-warranty repairs, payment can be made with Visa, Master Card, or with approved credit terms.
Send the device to your local agent, or to the following address: 8th Floor, Building B1, Zhiyuan, Xueyuan Road, Xili, Nanshan, Shenzhen, 518055, China.
9.5 Other Services
You can purchase optional accessories directly from Autel's authorized tool suppliers or your local distributor/agent. Your purchase order should include contact information, product/part name, item description, and purchase quantity.
9.6 User Manual (PDF)
A detailed user manual in PDF format is available for download. You can access it via the product page or by visiting this link.
10. Compliance Information
10.1 FCC Compliance
FCC ID: WQ8-MX808S-TS2152
This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
10.2 SAR (Specific Absorption Rate)
The radiated output power of this device is below the FCC radio frequency exposure limits. The device should be used in a manner that minimizes potential human contact. The SAR limit set by the FCC is 1.6 W/Kg.
10.3 RoHS Compliance
This device is declared to be in compliance with the European RoHS Directive 2011/65/EU.
10.4 CE Compliance
This product conforms to the essential requirements of the Radio Equipment Directive 2014/53/EU and carries the CE mark.
11. Warranty
11.1 Limited One Year Warranty
Autel Intelligent Technology Corp., Ltd. (the Company) warrants to the original retail purchaser that this MaxiCOM diagnostics device, if proven defective in material or workmanship under normal usage and conditions, will be repaired or replaced (with new or rebuilt parts) within a 1-year period from the date of purchase. This is subject to proof of purchase and at the Company's option, without charge for parts or labor directly related to the defect(s).
The Company is not liable for incidental or consequential damages arising from the use, misuse, or mounting of the device.
11.2 Warranty Exclusions
This warranty does not apply to:
- Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair, or improper storage.
- Products whose mechanical or electronic serial number has been removed, altered, or defaced.
- Damage from exposure to excessive temperatures or extreme environmental conditions.
- Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company.
- Defects in appearance, cosmetic, decorative, or structural items such as framing and non-operative parts.
- Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.
IMPORTANT
All contents of the product may be deleted during the repair process. You should create a backup copy of any contents of your product before delivering it for warranty service.