Kalobee HY6

Contents

Kalobee HY6 Mini LCD Smart Projector User Manual

1. Introduction

The Kalobee HY6 is a compact and versatile portable LCD smart projector, designed to deliver high-quality viewing experiences in both home and outdoor settings. It features a sleek, palm-sized design with a convenient carrying handle, emphasizing portability for easy transport during camping trips, travel, or moving between rooms at home. Equipped with advanced visual and audio functions, an intelligent operating system, and flexible connectivity options, this projector is suitable for bedroom viewing, living room entertainment, outdoor camping, and even small office meetings. This manual provides detailed instructions on the projector's specifications, operation methods, troubleshooting, and maintenance to help you use the product properly and extend its service life.

Note: There are slight configuration differences between the basic version and Pro version of the Kalobee HY6. Please refer to your actual product configuration for details. The brightness value marked in this manual represents the average value of mass production, measured in accordance with the ISO 21118 standard under ideal laboratory conditions in high-performance mode.

Kalobee HY6 Projector used in RV travel and office meeting scenarios.
The Kalobee HY6 projector is versatile for both leisure and work environments, as shown in RV travel and office meeting settings.

2. Product Overview & Specifications

2.1 Basic Information

  • Product Model: Kalobee HY6
  • Display Technology: LCD
  • Light Source: LED (Full-Color RGB LED)
  • Nominal Light Source Life: Normal mode 20,000 hours; Eco mode 30,000 hours; Smart Eco mode 30,000 hours
  • Product Size: 143 × 149 × 241 mm / 5.63 × 5.87 × 9.49 inches
  • Net Weight: 1.72 kg / 3.78 lb
  • Operating Temperature: 5°C ~ 35°C
  • Power Consumption: Approximately 65 W
  • Noise Level: Standard mode < 27 dB @ 25°C (measured at 1m distance)

2.2 Display Parameters

  • Native Resolution: 1080P (1920 × 1080 FHD)
  • Supported Decoding Resolution: 4K UHD (3840 × 2160)
  • Brightness: 200 ISO Lumens (average mass production value)
  • Contrast Ratio: 1600:1
  • Aspect Ratio: 4:3 / 16:9 (switchable)
  • Throw Ratio: 1.25:1
  • Projection Size: 40 ~ 120 inches (best recommended size: 100 inches)
  • Projection Distance: 0.8 ~ 4 m
  • Keystone Adjustment: Auto & Manual 2D Keystone Correction; Vertical ±30 degrees; Horizontal ±30 degrees
  • Additional Image Functions: Auto Focus, Intelligent Screen Fit, Intelligent Obstacle Avoidance
  • Gimbal Stand Tilt Range: 210°; Built-in Stand Tilt Range: ±95°
A large projected screen displaying vibrant, colorful abstract art.
Experience a giant screen with over 100 inches of vibrant 4K image quality, revealing every detail.

2.3 Hardware & System

  • Processor: Hisilicon 352 AI Smart Chip
  • RAM: 1 GB DDR3 (Basic Version); 2 GB (Pro Version)
  • Storage (ROM): 8 GB eMMC5.1 (Basic Version); 32 GB (Pro Version)
  • Operating System: Linux (Basic Version); Android (Pro Version)
  • Supported Streaming Services: Netflix, YouTube, Prime Video, etc. (content licensed)
Diagram of the Hisilicon 352 AI Smart Chip with 2GB RAM and 32GB storage, representing high-performance hardware.
The projector features a high-performance Hisilicon 352 AI Smart Chip with 2GB RAM and 32GB large storage for smooth operation.

2.4 Audio & Connectivity

2.4.1 Audio

  • Built-in Speaker: 6W Single Speaker
  • Supported Audio Formats: Dolby Audio, Dolby Digital, Dolby Digital Plus

2.4.2 Interfaces

  • Input Interfaces: 2 × USB 2.0, 1 × HDMI In, 1 × DC-In
  • Output Interface: 1 × 3.5 mm Audio Out

2.4.3 Wireless Connection

  • WiFi: WiFi 6, 2.4G/5GHz, 1T1R IEEE 802.11 a/b/g/n/ac/ax
  • Bluetooth: Bluetooth 5.2 / BLE
  • Screen Mirroring: Supported for iOS and Android devices (wireless screen projection)

2.5 Package Contents

  • 1 × Kalobee HY6 Projector
  • 1 × Power Cable
  • 1 × Remote Control
  • 2 × AAA Batteries
  • 1 × User Manual (this document)

3. Setup

3.1 Projection Modes

The Kalobee HY6 supports flexible projection modes to adapt to different usage scenarios, with adjustable stand tilt for easier angle adjustment:

  • Front Projection: Project images onto a screen or wall from the front of the projector (most commonly used mode for home and office).
  • Rear Projection: Project images onto a transparent screen from the back, suitable for special scenarios such as store windows or public displays.
  • Ceiling Mount Projection: Install the projector on the ceiling and project images downward (ceiling mount bracket is optional, not included in the package).

With its gimbal stand (210° tilt range) and built-in stand (±95° tilt range), you can easily adjust the projection angle without additional brackets.

3.2 Connecting External Devices

  • Connecting via HDMI: Insert one end of the HDMI cable into the HDMI interface of the projector, and the other end into the HDMI interface of a computer, game console, or other devices. Then select "HDMI" as the input source on the projector's home screen to start using.
  • Connecting via USB: Insert a U disk or hard drive into one of the USB 2.0 interfaces of the projector. The projector will automatically recognize the device; enter the "File Manager" to browse and play videos, pictures, music, and other files stored in the device.
  • Connecting via Bluetooth: Enter the "Settings" menu, turn on Bluetooth, search for and pair with Bluetooth devices (such as speakers, headphones). After successful pairing, audio will be played through the connected Bluetooth device.
  • Wireless Screen Mirroring: Connect your phone and projector to the same WiFi network. For iOS devices: Swipe down from the top right corner of the screen to open Control Center, tap "Screen Mirroring", select "Kalobee HY6" from the device list, and complete the connection. For Android devices: Open "Settings" on your phone, select "Connected Devices" or "Screen Mirroring", turn on the function, select "Kalobee HY6", and complete the connection.
A projector wirelessly casting content from a mobile device to a large screen.
The projector supports wireless screen projection, allowing small screens to become giant screens for an immersive viewing experience.

4. Operating Instructions

4.1 Power On/Off

  • Power On: Connect the projector to a power source using the included power cable, then press the power button on the top of the machine or the remote control for 2-3 seconds until the indicator light turns on and the startup screen appears.
  • Power Off: Press and hold the power button for 2-3 seconds, then select "Power Off" in the pop-up window. Do not unplug the power cord directly when the projector is working, as this may damage internal components and shorten the light source life.

4.2 Adjusting Image Quality

  • Focus Adjustment: The projector supports auto focus; after power-on, it will automatically adjust to a clear image. If the image is still blurred, you can manually adjust the focus ring on the lens until the image is clear.
  • Keystone Correction: If the image is distorted, the projector will automatically correct it. If the automatic correction is not ideal, enter the "Settings" menu, select "Image", and adjust the keystone manually (vertical ±30 degrees, horizontal ±30 degrees).
  • Brightness/Contrast: Enter the "Settings" menu, select "Image", and adjust the brightness and contrast according to your needs. For the best display effect, it is recommended to use the projector in a dark room or at night.
  • Projection Size & Distance: Adjust the projection distance (0.8-4 m) to get the desired projection size (40-120 inches). The recommended best projection size is 100 inches, with a corresponding projection distance of about 2.5 meters.
Official product demonstration video for the Kalobee HY6 Projector, showcasing its features and capabilities.

5. Maintenance

  • Environmental Conditions: Do not place the projector in direct sunlight or near high-temperature devices (such as heaters, stoves), as this may affect the service life of the light source and internal components. Keep the projector away from water and humid environments (such as bathrooms, kitchens) to avoid short circuits and other faults.
  • Lens Care: Do not touch the lens with your hands. If the lens is dirty, clean it with a professional lens cloth gently; do not use chemical cleaners (such as alcohol, acetone), as this may scratch the lens.
  • Ventilation: The projector will generate heat during operation. Do not block the air vents on the machine to ensure normal heat dissipation; otherwise, overheating may cause the projector to shut down automatically.
  • Storage: When the projector is not in use for a long time, unplug the power cord to save energy and protect the device from power surges.
  • Safety: Children should use the projector under the supervision of adults to avoid accidental injury (such as touching the high-temperature shell or lens).
  • Servicing: Do not disassemble the projector by yourself, as this will void the warranty and may cause safety hazards.
  • Power Supply: Use only the original power cable provided in the package; using non-original power cables may cause equipment damage or fire hazards.

6. Troubleshooting

Fault Phenomenon Possible Causes Solutions
No power on
  1. The power cord is not plugged in properly;
  2. The power socket is faulty;
  3. The power button is not pressed correctly.
  1. Re-plug the power cord firmly;
  2. Replace the power socket and try again;
  3. Press and hold the power button for 2-3 seconds.
Blurred image
  1. The focus is not adjusted properly;
  2. The lens is dirty;
  3. The projection distance is not within the recommended range;
  4. The environment is too bright.
  1. Use auto focus or manually adjust the focus ring;
  2. Clean the lens with a professional lens cloth;
  3. Adjust the projection distance to 0.8-4 m;
  4. Use the projector in a dark room or close curtains.
Distorted image
  1. Auto keystone correction is disabled;
  2. The projector is tilted too much;
  3. Intelligent screen fit is not enabled.
  1. Enable auto keystone correction in the settings;
  2. Adjust the projector tilt angle using the built-in/gimbal stand;
  3. Enable intelligent screen fit in the settings.
No image display
  1. The input source is incorrect;
  2. The external device is not connected properly;
  3. The brightness is too low;
  4. The projector is in standby mode.
  1. Select the correct input source (HDMI, USB, etc.);
  2. Reconnect the external device;
  3. Increase the brightness in the settings;
  4. Press the power button to wake the projector from standby.
No sound
  1. The volume is too low;
  2. The audio output is connected incorrectly;
  3. Bluetooth is connected to other devices;
  4. The built-in speaker is faulty.
  1. Increase the volume via the remote control or projector button;
  2. Reconnect the external audio device (if used);
  3. Disconnect Bluetooth from other devices and re-pair;
  4. Contact after-sales service for maintenance.
Screen mirroring failure
  1. The phone and projector are not connected to the same WiFi;
  2. Screen mirroring function is disabled on the phone;
  3. WiFi signal is weak.
  1. Connect both devices to the same WiFi network;
  2. Enable screen mirroring function on the phone;
  3. Move the projector and phone closer to the router to enhance the WiFi signal.
Projector overheats and shuts down
  1. The air vents are blocked;
  2. The operating environment temperature is too high;
  3. The projector has been working for a long time.
  1. Remove obstacles blocking the air vents;
  2. Move the projector to a cooler environment (5-35 °C);
  3. Turn off the projector and let it cool down for 15-20 minutes before restarting.

7. User Tips

  • For optimal viewing, ensure your projection surface is smooth and light-colored.
  • When using screen mirroring, ensure both your device and the projector are connected to a stable 5GHz Wi-Fi network for the best performance.
  • Experiment with different projection distances to find the ideal screen size for your space, keeping in mind the recommended 100-inch size at 2.5 meters for a balanced experience.
  • Utilize the automatic keystone correction and focus features to quickly set up a clear, rectangular image, especially when moving the projector frequently.

8. Warranty & Support

For detailed warranty information, service terms, and additional support, please refer to the official user manual PDF available online:

Download Kalobee HY6 User Manual (PDF)

If you encounter any issues not covered in this manual or require further assistance, please contact customer support through your purchase platform or the official Kalobee website.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.