AKKO Dash MAX/Ultra

Contents

Akko Dash MAX/Ultra Gaming Mouse

User Manual

Model: Dash MAX / Dash Ultra | Brand: AKKO

1. Introduction

Welcome to the Akko Dash MAX/Ultra Gaming Mouse user manual. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new gaming mouse. Designed for competitive e-sports, the Akko Dash series offers ultralight design, high-performance sensors, and versatile connectivity options to enhance your gaming experience.

2. Package Contents

Please check the package for the following items:

  • Akko Dash MAX/Ultra Gaming Mouse
  • USB-C Cable
  • 2.4G Wireless Receiver
  • User Manual (this document)

3. Product Overview

Familiarize yourself with the components of your Akko Dash Gaming Mouse:

Diagram of Akko Dash Gaming Mouse components
Akko Dash Gaming Mouse Component Diagram
  1. Left Button
  2. Right Button
  3. Scroll Wheel
  4. Indicator Light
  5. DPI Key
  6. Forward Button
  7. Backward Button
  8. Pairing Button
  9. Mode Switch (2.4G / OFF / BT)
  10. Receiver Slot

4. Setup Instructions

4.1. Charging the Mouse

Connect the mouse to your computer using the provided USB-C cable. The mouse will charge automatically. The indicator light may show charging status (details in Section 5.1).

4.2. Connectivity Modes

The Akko Dash Gaming Mouse supports three connectivity modes: USB-C Wired, 2.4G Wireless, and Bluetooth. Use the mode switch on the bottom of the mouse to select your desired mode.

Bottom view of Akko Dash mouse showing mode switch and USB-C port
Mouse bottom with mode switch and USB-C port

4.2.1. 2.4G Wireless Pairing

  1. Insert the 2.4G wireless receiver into an available USB port on your computer.
  2. Set the mode switch on the bottom of the mouse to '2.4G'.
  3. Press and hold the pairing key (button 8 in the diagram) for 3 seconds to enter pairing mode. The indicator light will flash green rapidly.
  4. Once successfully connected, the indicator light will stay green for 2 seconds.

4.2.2. Bluetooth Pairing

  1. Set the mode switch on the bottom of the mouse to 'BT'.
  2. Press and hold the pairing key (button 8 in the diagram) for 3 seconds to enter pairing mode. The indicator light will flash blue slowly, then rapidly.
  3. On your computer or device, search for Bluetooth devices and select 'Akko Dash Mouse' (or similar name) to connect.
  4. Once successfully connected, the indicator light will stay blue for 2 seconds.

4.2.3. Wired Mode

Connect the mouse directly to your computer using the USB-C cable. The mouse will automatically switch to wired mode and function without needing to select a mode via the switch.

5. Operating Instructions

5.1. Indicator Light Status

StatusIndicator Light BehaviorDescription
Power OnGreen Light flashes onceMouse is powered on.
2.4G PairingGreen Light flashes rapidlySearching for 2.4G receiver.
2.4G ConnectedGreen Light solid for 2 secondsSuccessfully connected via 2.4G.
Bluetooth PairingBlue Light flashes slowly, then rapidlySearching for Bluetooth connection.
Bluetooth ConnectedBlue Light solid for 2 secondsSuccessfully connected via Bluetooth.
DPI Mode SwitchFlashes 3 times (color varies by DPI level)Indicates DPI level change. DPI mode is off by default.
DPI Change (Slow)Red Light flashes slowlyIndicates a DPI change in progress.
DPI Change (Solid)Red Light stays onIndicates a DPI change has been applied.

5.2. Adjusting DPI (Dots Per Inch)

Press the DPI Key (button 5 in the diagram) to cycle through different DPI levels. The indicator light will change color to show the current DPI level:

DPI LevelIndicator Color
DPI Lv1Red
DPI Lv2Orange
DPI Lv3Yellow
DPI Lv4Green
DPI Lv5Cyan
DPI Lv6Blue
DPI Lv7Purple
DPI Lv8White

The Akko Gaming Hub software allows for further customization of DPI levels, including overclocking for the Dash Ultra model up to 42,000 DPI.

Diagram showing PixArt PAW3950 sensor and DPI levels
PixArt PAW3950 Sensor and DPI Levels

5.3. Polling Rate

The mouse supports an 8,000 Hz polling rate, even in 2.4G wireless mode, for stable, lag-free performance. The default polling rate is 1000Hz, but can be adjusted via the Akko Gaming Hub software.

Comparison of 1000Hz vs 8000Hz polling rate trajectory smoothing
8,000 Hz Polling Rate Comparison

5.4. Adjustable LOD Settings

The Lift-Off Distance (LOD) can be customized to 0.7mm, 1mm, or 2mm to prevent unwanted cursor movement when lifting the mouse. This setting can be adjusted via the Akko Gaming Hub software.

Diagram showing adjustable LOD settings for V9 Ultra and V9 Max
Adjustable LOD Settings

5.5. Akko Gaming Hub Software

The Akko Gaming Hub software (Windows OS compatible) provides extensive customization options for your mouse, including DPI settings, parameter adjustments, and macro programming. This allows for a highly personalized gaming setup.

Screenshot of Akko Gaming Hub software interface
Akko Gaming Hub Software Interface

6. Maintenance

To ensure the longevity and optimal performance of your Akko Dash Gaming Mouse, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe the mouse surface. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid harsh chemicals or abrasive materials.
  • Sensor Care: Keep the optical sensor on the bottom of the mouse clean and free from dust or debris. Use a cotton swab or compressed air if necessary.
  • Storage: When not in use, store the mouse in a dry, cool place away from direct sunlight and extreme temperatures.
  • Battery: Avoid fully discharging the battery frequently. For long-term storage, charge the battery to around 50%.

7. Troubleshooting

If you encounter issues with your Akko Dash Gaming Mouse, try the following solutions:

ProblemPossible Solution
Mouse not responding
  • Ensure the mouse is charged.
  • Check the mode switch (2.4G, BT, Wired) is set correctly.
  • For 2.4G/BT, re-pair the mouse (see Section 4.2).
  • Try a different USB port for the receiver or wired connection.
  • Restart your computer.
Lag or intermittent connection
  • Ensure the receiver is close to the mouse and not obstructed.
  • Avoid interference from other wireless devices.
  • Try wired mode to rule out wireless issues.
  • Update mouse firmware via Akko Gaming Hub.
DPI not changing
  • Ensure the DPI key is functioning.
  • Check settings in Akko Gaming Hub.
  • Reinstall Akko Gaming Hub software.
Cursor erratic or jumpy
  • Clean the optical sensor on the bottom of the mouse.
  • Ensure you are using the mouse on a suitable surface (e.g., a mouse pad).
  • Adjust LOD settings via Akko Gaming Hub.

8. Specifications

FeatureAkko Dash UltraAkko Dash MAX
WeightBlack: 40±3g, White: 41±3g (excluding skates)
MCUNordic 54L15Realtek RTL8762
SensorPixArt PAW3950PixArt PAW3395
Max DPI42,000 DPI (overclocked)26,000 DPI
Polling RateUp to 8,000 Hz (2.4G Wireless & Wired)
SwitchesOMRON Optical (70M Clicks) or Akko Custom Optical (150M Clicks)Akko Custom Optical (150M Clicks)
EncoderTTC Gold Wheel
Battery300 mAh High-Density
ConnectivityUSB-C Wired, 2.4G Wireless, Bluetooth
LOD Settings0.7mm, 1mm, 2mm (adjustable)
Hand OrientationBoth Hands (Symmetrical)
Operation ModeOpto-electronicOpto-electronic
Number of Buttons7
CertificationCE, WEEE

8.1. Restricted Substances (RoHS Compliance)

The Akko Dash Gaming Mouse complies with RoHS directives. The table below indicates the presence of restricted substances in various components:

Part NameLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr6+)PBBPBDEDEHPBBPDBPDIBP
CableOOOOOOOOOO
PCBOOOOOOOOOO
Plastic PartsOOOOOOOOOO
Metal PartsOOOOOOOOOO
Rubber PartsOOOOOOOOOO

Note: 'O' indicates that the percentage content of the restricted substance does not exceed the reference value of presence. 'X' indicates that the percentage content of the restricted substance exceeds the reference value of presence.

9. User Tips

  • For optimal wireless performance, ensure the 2.4G receiver is placed in a front USB port or via a USB extension to minimize signal interference.
  • Experiment with different DPI settings and LOD values using the Akko Gaming Hub to find what best suits your playstyle and mouse pad.
  • Regularly check the Akko website for firmware updates to ensure your mouse has the latest features and performance enhancements.
  • The ultralight design is particularly beneficial for fast-paced games requiring quick, precise movements.

10. Warranty and Support

10.1. Warranty Information

Akko provides a one-year warranty for customers in mainland China. For warranty policies in other regions, please contact your local Akko seller or distributor. The warranty may vary depending on the platform and reseller from which the product was purchased.

Warning: Disassembling the mouse without manufacturer instructions will immediately void the warranty.

10.2. After-Sales Service

Official after-sales service hours are Monday to Friday, 10:00 AM to 6:00 PM (local time), excluding national holidays.

Manufacturer: Shenzhen Yinchen Technology Co., Ltd.

Address: 33 Langbi Rd, Bitou First Industrial Zone, Bao'an District, Shenzhen, China

Website: www.akkogear.com

Customer Service Phone: 0755-23216420

11. Regulatory Compliance (NCC Warning)

This device complies with relevant low-power radio frequency device regulations. Unauthorized alteration of frequency, increase of power, or modification of original design characteristics and functions is prohibited.

The use of low-power radio frequency devices must not affect flight safety or interfere with legal communications. If interference is detected, stop using the device immediately and improve it until no interference is present before resuming use. Legal communications refer to wireless communications operating under telecommunications regulations.

Low-power radio frequency devices must tolerate interference from legal communications or industrial, scientific, and medical radio frequency equipment.

This device is primarily for home use (Class B) and is suitable for use in all regions.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.