1. Introduction
This manual provides detailed instructions for the installation, configuration, and maintenance of your HORACO ZX510S-4T2XS 10Gb Web Managed Switch. This device is designed for high-speed network environments, offering advanced features like web management, VLAN support, Quality of Service (QoS), and Link Aggregation (LACP) for robust and efficient data transmission. It is ideal for home labs, small to medium-sized businesses, and other environments requiring high-performance networking.

Front view of the HORACO 10Gb Web Managed Switch, highlighting the integrated Noctua fan.
2. Safety Information
Please read and follow these safety guidelines to prevent damage to the device or injury to yourself.
- Ensure the power supply is DC 12V 2.5A as specified. Using an incorrect power adapter may damage the device.
- Do not expose the switch to water or excessive humidity.
- Operate the device within the specified temperature range of 0°C to 40°C (32°F to 104°F).
- Ensure adequate ventilation around the switch to prevent overheating. The built-in Noctua fan assists with heat dissipation.
- Protect the device from lightning strikes using appropriate surge protection. The switch features 4KV lightning protection.
- Avoid opening the casing unless performed by qualified personnel.
3. Package Contents
Verify that all items are present in the package:
- HORACO ZX510S-4T2XS 10Gb Web Managed Switch: 1 unit
- Instruction manual: 1 book (This document and the PDF User Manual)
- Certificate of Compliance: 1
- Power cord: 1
4. Product Overview
The HORACO ZX510S-4T2XS is a 6-port 10GbE managed Ethernet switch designed for high-performance networking. It features 4 RJ45 ports and 2 SFP+ optical ports, supporting various speeds for flexible deployment.

Product Overview: 4x 10G RJ45 Ports and 2x 10G SFP+ Optical Ports.
4.1 Port Description and Indicators

Detailed view of the switch's ports and indicators.
- PWR (Power Indicator): Always on when equipment is energized. No light indicates the device is not energized.
- SYS (System Indicator Lights): Always on for normal system operation. Blinking indicates system startup in progress.
- Reset Button: Long press for 6 seconds to restore factory settings.
- DC 12V: Power supply input (DC 12V 2.5A).
- 1-4 Network Ports (RJ45): 4x 100M/1G/2.5G/5G/10G adaptive ports. Indicators show Link/Act status (Green for 10G, Yellow for 1G/2.5G/5G).
- 5-6 Optical Ports (SFP+): 2x 10G SFP+ ports. Indicators show Link/Act status (Green for 1G/2.5G, Yellow for 10G).
- Ground Screw: For grounding the device to protect against electrical surges.
5. Setup Instructions
5.1 Physical Installation
The switch supports both desktop and wall mounting options.
- Desktop Mounting: Place the switch on a stable, flat surface, ensuring adequate space around the device for ventilation.
- Wall Mounting: The bottom side of the body features wall mounting holes. Use appropriate screws and anchors (not included) to securely mount the switch to a wall. This provides easy and convenient installation, saving space.

The switch supports wall mounting for flexible placement.
5.2 Power Connection
- Connect the provided DC 12V 2.5A power adapter to the 'DC 12V' port on the switch.
- Plug the power adapter into a suitable power outlet.
- Verify that the 'PWR' indicator light on the switch illuminates, indicating power is supplied.
5.3 Network Connections
Connect your network devices to the switch using appropriate cables.
- RJ45 Ports (1-4): Use standard Ethernet cables (Cat5e/Cat6/Cat6a/Cat7 depending on desired speed) to connect devices such as computers, NAS, servers, or other network equipment. These ports are adaptive and support 100M/1G/2.5G/5G/10G speeds.
- SFP+ Ports (5-6): Insert compatible SFP+ modules (not included) into these ports. Use fiber optic cables to connect to other SFP+ enabled devices or aggregation switches for 1G/2.5G/10G optical links.
- Grounding: For enhanced protection, connect a grounding wire to the ground screw on the switch and to a proper earth ground. The switch features 4KV lightning protection.

Example network topology with the 10GbE switch.
6. Operating Instructions
The HORACO ZX510S-4T2XS is a web-managed switch, allowing configuration and monitoring through a web browser interface.
6.1 Web Management Login
- Connect your PC: Connect your computer directly to any of the switch's RJ45 ports.
- Configure PC IP: For the first login, ensure your PC's IP address is in the same network segment as the switch but different. Set your PC's IP address to
192.168.2.x(where1 < x ≤ 254) and the subnet mask to255.255.255.0. - Access Web Interface: Open a web browser (IE 9.0+, Chrome 23.0+, or Firefox 20.0+ recommended) and type the default switch address:
http://192.168.2.1into the address bar, then press "Enter". - Login: A login window will appear. Enter the default username "
admin" and password "admin". Click "Log in".

The default login interface for web management.
6.2 Navigation Bar Overview
The web interface features a navigation bar with various menu items, each containing submenus for detailed configuration and monitoring:
| Menu Item | Submenus | Description |
|---|---|---|
| Status | System Information, Port Statistics, MAC Address Table | Display device status, port flow statistics, and MAC address table entries. |
| Network | IP Address, DNS, System Time | Configure management IP, DNS settings, and system time. |
| Port | Port Setting, Link Aggregation, EEE, Jumbo Frame, Port Security, Protected Port, Storm Control, Mirroring | Configure individual port parameters, aggregation, power efficiency, frame size, security, isolation, traffic control, and mirroring. |
| VLAN | VLAN, VLAN Configuration, Membership, Port Setting | Create, configure, and manage Virtual Local Area Networks. |
| MAC Address Table | Static Address, Filtering Address | Manage static and filtered MAC address entries. |
| Spanning Tree | Property, Port Setting, MST Instance, MST Port Setting, Statistics | Configure STP/RSTP/MSTP to prevent network loops. |
| ERPS | Property, ERPS Instance | Configure Ethernet Ring Protection Switching for high reliability. |
| Loopback | Loopback Config | Configure loopback detection to prevent network storms. |
| Discovery | LLDP, Port Setting, MED Network Policy, MED Port Setting, Packet View, Local Information, Neighbor, Statistics | Manage Link Layer Discovery Protocol (LLDP) and related settings. |
| Multicast | General, Group Address, Router Port, IGMP Snooping | Configure multicast settings and IGMP Snooping. |
| Security | Management Access, DHCP Snooping | Configure access control and DHCP Snooping for network security. |
| QoS | General, Rate Limit | Configure Quality of Service parameters for traffic prioritization. |
| Diagnostics | Ping, Copper Test, Fiber Module | Perform network diagnostic tests. |
| Management | User Account, Firmware, Configuration, SNMP | Manage user accounts, firmware, configuration files, and SNMP settings. |
6.3 System Information
To view basic information about your switch, navigate to Status > System Information in the web interface. This section displays details such as the model, system name, location, serial number, MAC address, IP address, system uptime, current time, firmware version, and the status of HTTP and SNMP services.
6.4 Port Settings
To configure individual port parameters, go to Port > Port Setting. Here you can adjust settings like speed (Auto, 100M, 1G, 2.5G, 5G, 10G), duplex mode (Auto, Full, Half), and flow control (Auto, Enable, Disable) for each RJ45 and SFP+ port.
6.5 Link Aggregation (LAG)
Link Aggregation combines multiple physical Ethernet links into a single logical link to increase bandwidth and provide redundancy. The switch supports both Manual Mode and LACP (Link Aggregation Control Protocol) Mode.
- Navigate to Port > Link Aggregation > Group.
- Select a load-balancing algorithm (MAC Address or IP-MAC Address).
- Choose an available LAG (1-8) and click "Edit".
- Select the desired mode (Static for Manual, LACP for LACP Mode).
- Move the ports you wish to aggregate from "Available Port" to "Selected Port".
- Click "Apply" to save changes.

Link Aggregation increases bandwidth and redundancy.
6.6 VLAN Configuration
VLANs segment your network into logical broadcast domains, improving security and efficiency.
- Create VLAN: Go to VLAN > VLAN > Create VLAN. Select a VLAN ID (1-4094) and optionally provide a name.
- VLAN Configuration: Navigate to VLAN > VLAN > VLAN Configuration. Select a VLAN ID and configure ports as Trunk (for inter-switch links) or Access (for end devices).
- Membership: In VLAN > VLAN > Membership, select a port and configure its VLAN membership (Tagged, Untagged, Excluded) and PVID (Port VLAN ID).

VLAN segmentation for flexible network management.
6.7 Spanning Tree Protocol (STP/RSTP/MSTP)
Spanning Tree Protocol prevents network loops that can occur with redundant links, ensuring network stability.
- Go to Spanning Tree > Property to enable STP and select the desired mode (STP, RSTP, or MSTP).
- Configure global parameters such as priority, hello time, and max age.
- In Spanning Tree > Port Setting, adjust port-specific STP parameters like path cost, priority, and edge port status.
6.8 Quality of Service (QoS)
QoS allows you to prioritize network traffic, ensuring critical applications receive sufficient bandwidth.
- Navigate to QoS > General > Property to enable QoS and set the trust mode (CoS, DSCP, or CoS-DSCP).
- Configure Queue Scheduling (SP or WRR) and CoS Mapping or DSCP Mapping to define how different traffic types are prioritized into queues.
- Use QoS > Rate Limit > Ingress / Egress Port to set bandwidth limits on individual ports for incoming and outgoing traffic.
6.9 Other Management Functions
The switch offers additional management capabilities:
- DHCP Snooping: Found under Security > DHCP Snooping, this feature enhances network security by preventing unauthorized DHCP servers and ensuring IP address integrity.
- SNMP (Simple Network Management Protocol): Configurable under Management > SNMP, SNMP allows network administrators to monitor and manage network devices remotely.
- Port Mirroring: Located under Port > Mirroring, this feature copies traffic from a source port to a destination port for network analysis and troubleshooting.

Key network management functions supported by the switch.
7. Maintenance
7.1 Firmware Upgrade
Regularly updating the firmware ensures optimal performance and access to new features.
- Navigate to Management > Firmware > Manual Upgrade.
- Select the "Image" file type and "Upgrade" action.
- Choose the method (TFTP or HTTP) and specify the firmware file.
- Click "Apply" to start the upgrade process.
7.2 Configuration Management
It is recommended to save your configuration regularly and back it up.
- Save Configuration: Go to Management > Configuration > Save Configuration. You can save the running configuration to startup configuration.
- Backup/Restore Configuration: In Management > Configuration > Manual Upgrade, select "Configuration" as the file type and choose "Backup" or "Restore" as the action.
7.3 Heat Dissipation
The switch features a metal shell design and a built-in Noctua fan for highly efficient heat dissipation, ensuring stable operation and improving durability.

Efficient heat dissipation with the built-in Noctua fan.

Cooling fan and vents for optimal airflow.
8. Troubleshooting
8.1 Diagnostics Tools
The switch provides built-in diagnostic tools to help identify and resolve network issues.
- Ping: Located under Diagnostics > Ping, this tool checks the availability of specified IP addresses and host names.
- Copper Test: Accessible via Diagnostics > Copper Test, this function evaluates the state of RJ45 cables and can locate faults.
- Fiber Module: In Diagnostics > Fiber Module, you can view DDM (Digital Diagnostics Monitoring) information for installed SFP+ optical modules.
8.2 Common Issues and Solutions
- Unsaved Configuration Changes: If you reboot the switch without saving the running configuration, all unsaved changes will be lost. Always save your configuration before rebooting or powering off the device.
- Network Loops: Implement Spanning Tree Protocol (STP/RSTP/MSTP) to prevent network loops caused by redundant connections, which can lead to broadcast storms and network instability.
- Unauthorized Access: Utilize the Port Security feature (Port > Port Security) to restrict access to specific MAC addresses on individual ports.
- Broadcast Storms: Configure Storm Control (Port > Storm Control) to suppress excessive broadcast, unknown multicast, and unicast messages, preventing network congestion.
- Login Issues: If you forget the password, you can long-press the Reset button for 6 seconds to restore factory settings, which will revert the username and password to 'admin'.
9. Specifications
The following table details the technical specifications of the HORACO ZX510S-4T2XS switch.

Detailed product parameters.
| Feature | Description |
|---|---|
| Model Number | ZX510S-4T2XS |
| Brand Name | HORACO |
| Switch Type | Ethernet |
| Transmission Rate | 10000 Mbps (10/100Mbps/1G/2.5G/10Gbps adaptive) |
| Communication Mode | Full-Duplex & Half-Duplex |
| Function | QoS, VLAN Support, LACP, SNMP, Port Mirroring, IGMP |
| Ports | 4x 10G RJ45 Ports, 2x 10G SFP+ Optical Ports |
| Chip Solution | RTL9303 + RTL8264B |
| Backplane Bandwidth | 120Gbps |
| Packet Forwarding Rate | 89.28Mpps |
| MAC Address Table Size | 16K |
| Package Cache | 12Mbit |
| VLAN Range | 1-4094 |
| Forwarding Mode | Store and Forward |
| Network Medium (RJ45) | 10Base-T: Cat3, 4, 5 or above UTP/STP (≤100m) 100Base-TX: Cat5 or above UTP/STP (≤100m) 1000Base-TX: Cat5 or above UTP/STP (≤100m) 2.5GBase-TX: Cat6 or above UTP/STP (≤100m) |
| Power Supply | DC 12V 2.5A |
| Motherboard Power Consumption | 24.3W |
| Indicator Lights | PWR, SYS, Link/Act |
| Operating Temperature | 0°C ~ 40°C (32°F ~ 104°F) |
| Storage Temperature | -40°C ~ 70°C (-40°F ~ 158°F) |
| Operating Humidity | 10% ~ 90% (non-condensing) |
| Storage Humidity | 5% ~ 95% (non-condensing) |
| Installation | Wall mounting, Desktop mounting |
| Net Weight | 660g |
| Gross Weight | 926g |
| Product Dimension | 200mm × 118mm × 44mm |
| Package Dimension | 303mm × 190mm × 60mm |
| Certifications | CE, FCC, RoHS |
10. User Tips
Based on user experiences, here are some helpful tips for using your HORACO 10Gb Web Managed Switch:
- The built-in Noctua fan is designed for quiet operation. While generally unnoticeable in a normal room, it is not completely silent, and its speed will adjust based on the internal temperature.
- The switch offers extensive management options, making it suitable for complex network setups and integration with other managed or unmanaged switches.
- Despite its robust features, the physical case size might be larger than expected for some users.
- Perform flow tests after configuration to ensure optimal performance and data transmission.
- Even in hot environments, the Noctua fan effectively keeps the CPU temperature stable, often around 25°C above room temperature at higher RPMs.
11. Warranty and Support
HORACO provides a 1-Year Free Warranty and Lifetime Professional Technical Support for this product. For any technical assistance or warranty claims, please contact HORACO Official Store customer service.
For more detailed technical information and advanced configurations, please refer to the comprehensive PDF User Manual.