1. Product Overview
The INSE I8 corded stick vacuum cleaner offers powerful suction with a one-touch operation, simplifying your cleaning routine. Its extra-long cord provides ample reach to clean all corners of your room without the need to frequently switch power outlets.
Package Contents
Please ensure all parts are present before assembly:
- Main Motor (1)
- Metal Tube (1)
- Floor Brush (1)
- 2-in-1 Brush (1)
- Long Crevice Tool (1)
- Power Cord (1)
- Wall Bracket (1)
- Roller Cleaning Tool (1)
- Filter Component (1)
- Filter (2)

Diagram showing all included components of the INSE I8 Corded Vacuum Cleaner.
2. Setup Instructions
Wall Mount Installation
Choose a location close to a power outlet. Ensure the point is high enough on the wall to allow the telescopic wand and floor nozzle to hang freely. Place the wall mount against the wall and use a pencil to mark the drill holes. Drill holes (with a 1/4" bit) and insert drywall anchors. Insert screws through the holes on the mount and tighten until firmly attached.

Diagram illustrating how to install the wall mount for the vacuum cleaner.
Assembly
- Connect the Main Motor and Metal Tube: Slide the telescopic metal tube onto the main motor until it clicks securely into place.
- Attach the Floor Brush: Push the telescopic metal tube into the floor brush until it clicks.
- Using Accessories: For cleaning high-up areas, accessories can be directly connected to the metal tube.

Diagram showing the assembly steps for the main motor, metal tube, and floor brush.
3. Operating Instructions
The INSE I8 vacuum cleaner features a simple one-touch power switch for easy operation.
- Power On/Off: Locate the power switch on the main motor. Press the switch to turn the vacuum cleaner ON. Press it again to turn it OFF.
- Cleaning: Guide the floor brush over the surfaces you wish to clean. The powerful suction will pick up dust and debris.
- Using Attachments: For specific cleaning tasks, detach the floor brush and attach the 2-in-1 brush or long crevice tool directly to the main motor or the metal tube.

Illustration showing the power switch on the main motor of the INSE I8 vacuum cleaner.
Product Demonstration Video
Demonstration of the INSE I8 vacuum cleaner in action, showcasing its suction power on various surfaces and its maneuverability.
4. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your INSE I8 vacuum cleaner.
Cleaning the Main Motor (Non-Electrical Parts)
- Turn off the vacuum cleaner before cleaning.
- Wipe the surface with a clean, damp cloth.
- Be cautious not to let water enter the inner parts of the main motor.
- Do not place the vacuum cleaner under direct sunlight or in wet conditions after cleaning.
Cleaning the Detachable Roller Brush
If the roller brush becomes tangled or stuck, an alert may appear on the LED display. Clean it promptly.
- Unlock the side lock located on the bottom of the cleaner head.
- Remove the side cover and carefully take out the roller brush.
- Use the provided roller cleaning tool to remove tangled hairs and debris.

Diagram showing how to remove and clean the roller brush from the floor head.
Emptying the Dust Cup
Empty the dust cup regularly to maintain consistent suction power.
- Hold the cleaner over a waste bin.
- Press the lever to release the bottom lid of the dust cup, allowing debris to fall out.

Illustration of the one-click dust cup emptying mechanism.
Cleaning the Metal Filter Screen & Filter
Regularly check and clean the metal filter screen and filter. Clean the filter promptly if suction performance declines. Replace the filter if it is damaged or no longer maintains suction performance.
- To access the filter, open the dust box with a one-touch removal. Turn left to remove the filter, and turn right to reinstall.
- If the strainer and sponge are very dirty, wash them with cool water. Use the cleaning brush for thorough cleaning.
- Ensure the metal filter screen and filter are completely dry before reassembling.
- Do not charge the vacuum if the ambient temperature is below $5^{\circ}C$ or above $40^{\circ}C$.

Diagram showing the steps to remove, wash, and dry the vacuum's filters.
Important Cautions for Maintenance
- Pay attention to sharp objects (e.g., glass) to prevent injury.
- Do not wash the mechanical parts of the dust box.
- Ensure all parts are completely dry before next use.
- Do not scrub the filter or apply undue force.
- Ensure the filter is correctly secured during assembly.
- Change the filter if it is damaged or if cleaning does not restore its pristine state.
5. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Causes | Solution |
|---|---|---|
| Product stops working suddenly |
|
|
| Vacuum cleaner could NOT stay on (shuts down automatically) | Blockage of roller brush activates Rotation-Clogging Protective System. |
|
| Suction power is getting weaker |
|
|
6. Specifications
Technical parameters for the INSE I8 Corded Vacuum Cleaner:
| Feature | Specification |
|---|---|
| Product Category | I8 |
| Net Weight | 2.5 KG |
| Nominal Power | 600 W |
| Retractable Tube Length | 47/77 cm |
| Weight (All Accessories Included) | 3 KG |
| Nominal Voltage | 230 V |
| Size (L*W*H) | 44.0*26.0*18.0 cm |
| Cable Length | 6 m |
| Dust Box Capacity | 0.6-1 L |
| Filter Type | HEPA |
| Installation | Hand Held |
| Function | Dry |
| Origin | Mainland China |
| Certification | CE |
7. Safety Instructions
To ensure safe operation and prevent damage, please read and follow these safety instructions carefully:
- Avoid Heat Sources: Do not place the vacuum cleaner near heat sources, radiation, or burning cigarettes.
- Prohibited Items: Do not use the appliance to vacuum:
- All liquids (water, solvents).
- Lime, cement, ash, and other construction dust/garbage.
- Hot objects (cigarette butts).
- Sharp debris (glass shards).
- Flammable and explosive articles (gasoline, alcohol products).
- Children Safety: Do not allow children to play with or operate the vacuum cleaner.
- Electrical Appliance: This is an electrical appliance. Use it appropriately and never leave it unattended while operating.
- Power Off: Always turn off the power during cleaning, maintenance, or when storing the appliance.
- Disconnecting Power: Do not pull the power cord to unplug. Always hold the plastic part of the plug to remove it from the power socket.
- Voltage Match: Ensure the power supply voltage matches the vacuum cleaner's charging voltage.
- Cord Protection: Keep the power cord away from sharp objects to prevent damage.
- Fire Prevention: Do not immerse the vacuum cleaner in water or expose it to heating appliances.
- Moving the Unit: Do not drag the power cord when moving the charging station.
- Discontinue Use If: If the vacuum cleaner falls and is damaged, or if the power cord is damaged, discontinue use immediately and send it to an approved maintenance facility.
- Blockage Warning: Stop operating the vacuum cleaner if the suction inlet is blocked to prevent damage (e.g., overheating) to the motor or deformation of plastic parts due to overheating.
8. User Tips
Based on user experiences, here are some tips to enhance your cleaning and maintenance routine:
- Cord Length: The 6-meter cord is very long, allowing you to clean large areas (e.g., 40 square meters) without needing to change power outlets frequently.
- Filter Maintenance: For optimal filter longevity, it is recommended to clean HEPA filters dry (e.g., with a portable blower) rather than frequently wetting them with water. This can help them last longer.
- Comfort and Maneuverability: The vacuum is lightweight and easy to maneuver around corners, close to walls, and under furniture, making it comfortable for extended use.
- Surface Performance: It performs very well on hard floors, tile, and upholstery. While it can be used on rugs, its deep cleaning capability on thick carpets may be limited.
- Motor Heat: The handle or motor housing may get warm after continuous use (e.g., 15 minutes), but it typically cools down quickly. This is considered normal operation.
9. Warranty and Support
Your INSE I8 Corded Vacuum Cleaner comes with comprehensive support to ensure your satisfaction.
Warranty Information
This product is covered by a 24-month Warranty & Lifetime Customer Support. This warranty applies only to eligible purchases made directly from authorized distributors. Warranty coverage is extended solely to the original owner and the original product and is not transferable.
How to Initiate a Warranty Claim
If your appliance operates improperly while in use under normal household conditions within the warranty period, please contact our customer support. To initiate a warranty claim, fill out the warranty form by contacting us at:
Email: helpeu@vacservice.vip
Please feel free to contact us anytime you need. We are always here for you.
