1. Introduction
The MCHOSE G3 V2 Pro is a high-performance wireless e-sports mouse designed for both gaming and office use. It features a lightweight design, multiple connectivity options (2.4G wireless, Bluetooth, and wired), and a precise optical sensor to enhance your computing experience.

Figure 1: MCHOSE G3 V2 Pro Mouse Overview
2. Package Contents
Please check the package for the following items:
- MCHOSE G3 V2 Pro Wireless Mouse
- USB Receiver (stored in the mouse)
- Type-C to USB Charging/Data Cable
- User Manual (this document)
3. Key Features
- Lightweight Design: Approximately 59g for comfortable, extended use.
- Multi-Mode Connectivity: Supports 2.4G wireless, Bluetooth, and wired connections.
- High-Performance Sensor: Equipped with a PAW3311 Optical Sensor (also supports PAW3395 in some variants) for precise tracking up to 12000 DPI (expandable to 26000 DPI via software).
- Long-Lasting Battery: Integrated 800mAh battery for extended usage time.
- M HUB Software: Fully self-developed driver for customization of key remapping, DPI settings, and performance parameters.
- Durable Switches: Features Omron mechanical micro switches with a 100 million click lifespan.
- TTC Silver Scroll Wheel Encoder: For precise and tactile scrolling.

Figure 2: Lightweight Gaming and Office Mouse

Figure 3: Advanced Technologies
4. Setup and Connection
4.1. Charging / Wired Connection
Connect the included USB cable by plugging the Type-C end into the mouse and the USB end into your computer. When in 2.4G/wireless mode, plugging in the USB cable will automatically switch the mouse to wired mode while simultaneously charging the battery.
4.2. 2.4G Wireless Connection
- Switch the mode button located on the bottom of the mouse to the 2.4G position.
- Remove the USB receiver from its storage slot on the bottom of the mouse.
- Insert the USB receiver into an available USB port on your computer.
- Manual Pairing (if needed): If the mouse does not connect automatically (factory default is usually pre-paired), press and hold the Left, Middle, and Right mouse buttons simultaneously for about 3 seconds until the indicator light flashes rapidly. The mouse will enter pairing mode. Insert the USB receiver into the computer's USB port and keep the mouse within 20 cm of the receiver. The indicator light will turn off once the connection is successful.
4.3. Bluetooth Wireless Connection
- Switch the mode button located on the bottom of the mouse to the BT position.
- On your computer or device, search for Bluetooth devices and select the corresponding pairing name (e.g., "MCHOSE G3 V2 Pro") to connect.
- Manual Pairing (if needed): If the connection is unsuccessful, press and hold the Left, Middle, and Right mouse buttons simultaneously for about 3 seconds until the indicator light flashes rapidly. The mouse will enter pairing mode. The indicator light will turn off once the connection is successful.
4.4. Driver Installation (M HUB Software)
The M HUB software allows for advanced customization of your mouse settings.
- Web Driver:
Visit https://www.mchose.store/pages/firmware-2 in your browser. Click on [Open M HUB WEB] > [Initialize Device] > [Allow Browser Access], then select your product model. - Desktop App Driver:
Visit https://www.mchose.store/pages/firmware-2 in your browser. Click on [Download M HUB Driver] and follow the instructions to download and install it. Note: The M HUB desktop app driver currently supports only Windows 10 and above. Windows 7 and macOS are not supported.
Video 1: MCHOSE G3 V2 Pro Product Showcase and Software Overview
5. Operating Instructions
5.1. Mouse Buttons
- Left Button: Primary click function.
- Right Button: Secondary click function (context menu).
- Middle Button/Scroll Wheel: Scroll up/down, middle click.
- Forward Button: Navigates forward in web browsers or file explorers.
- Backward Button: Navigates backward in web browsers or file explorers.
5.2. DPI Adjustment
Click the DPI Switch Button (located on the bottom of the mouse) to cycle through six preset DPI levels. Further adjustment and custom levels are available through the M HUB software.
- Level 1: Red Light (400 DPI)
- Level 2: Blue Light (800 DPI)
- Level 3: Green Light (1600 DPI)
- Level 4: Yellow Light (3200 DPI)
- Level 5: Cyan Light (6400 DPI)
- Level 6: Purple Light (12000 DPI)
The maximum DPI can be extended to 26,000 DPI via the M HUB software.
5.3. M HUB Software Usage
The M HUB software provides comprehensive control over your mouse settings:
- Key Remapping: Customize the function of each mouse button.
- DPI Settings: Fine-tune DPI levels, create custom profiles, and adjust polling rate.
- Performance Settings: Enable eSports mode for faster response, adjust debounce time, waveform control, line correction, motion sync, and hibernate settings.
- Other Settings: Manage charging status and other device-specific options.
5.4. Battery Status Indicator
The indicator light provides information about the mouse's battery status:
- Flashing Red: Battery is low, please charge promptly.
- Solid Red: Mouse is currently charging.
- Solid Green: Charging is complete.
6. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use for extended periods, store the mouse in a cool, dry place. It is recommended to turn off the mouse using the power switch on the bottom to conserve battery life.
- Charging: Always follow the charging instructions provided in this manual to ensure battery longevity and safety.
- Avoid Extreme Conditions: Do not expose the mouse to extreme temperatures, direct sunlight, or high humidity.
7. Troubleshooting
7.1. Mouse Not Responding
- Check Battery: Ensure the mouse is charged. Connect it via USB cable to charge.
- Check Connection:
- For 2.4G: Ensure the USB receiver is properly plugged into the computer and the mouse is set to 2.4G mode. Try a different USB port. Perform manual pairing if necessary.
- For Bluetooth: Ensure Bluetooth is enabled on your device and the mouse is in BT mode. Re-pair the device if needed.
- For Wired: Ensure the USB cable is securely connected to both the mouse and the computer.
- Restart: Restart your computer and the mouse.
7.2. Cursor Movement is Erratic or Laggy
- Clean Sensor: Ensure the optical sensor on the bottom of the mouse is clean and free from dust or debris.
- Surface: Use the mouse on a clean, non-reflective, and uniform surface.
- Interference: Move the mouse closer to the USB receiver (for 2.4G) or your Bluetooth device. Avoid placing the mouse near other wireless devices that might cause interference.
- DPI Setting: Adjust the DPI setting to a level that suits your usage.
7.3. Mouse Not Charging
- Cable Check: Ensure the Type-C cable is securely connected to the mouse and the USB end to a working USB port on your computer.
- Power Source: Only charge the mouse via your computer's USB port. Do not use fast-charging phone chargers, low-quality, non-standard, over-voltage, or over-current power adapters.
- Temperature: Avoid charging in high-temperature environments.
8. Specifications
| Feature | Specification |
|---|---|
| Model | MCHOSE G3 V2 Pro |
| Connectivity | 2.4G Wireless, Bluetooth, Wired (USB-C) |
| Sensor Model | Pixart 3311 (also PAW3395 in some variants) |
| DPI Range | 400-12000 DPI (up to 26000 DPI via software) |
| Polling Rate | 1000Hz (adjustable via software) |
| Acceleration | 50 G |
| Battery Capacity | 800mAh |
| Weight | Approx. 59g |
| Hand Orientation | Right |
| Operation Mode | Opto-electronic |
| Package Dimensions (approx.) | Length: 17cm, Width: 13cm, Height: 6cm |
| Package Weight (approx.) | 0.177 kg |
9. User Tips
- Smooth Gliding: Users report excellent gliding performance, especially on fabric mousepads. Ensure your mousepad is clean for the best experience.
- Software Ease: The M HUB software is generally considered easy to understand and use for customization.
- Wireless Range: While 2.4GHz wireless offers a stable connection up to about 7 meters, Bluetooth range might be more limited (around 3 meters) depending on your device's dongle quality.
- Battery Life: Expect around 6-8 hours of continuous use on a full charge, though this can vary with usage patterns and settings.
- Ergonomics: The mouse is relatively small, which is ideal for users with small to medium-sized hands. Users with larger hands might find it less comfortable.
- Button Feel: Side buttons are noted to be responsive and tactile.
10. Warranty and Support
For warranty information, technical support, or further inquiries, please refer to the official MCHOSE website or contact your point of purchase. Keep your proof of purchase for warranty claims.
11. FCC Notice
This device has been tested and complies with the limits for Class B digital devices under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This device generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception (which can be determined by turning the device on and off), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the device and receiver.
- Connect the device to a different circuit from the one to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.