TNCE WTDZW-63A

Contents

TNCE Tuya WiFi Smart Circuit Breaker Switch

Model: WTDZW-63A

1. Product Overview

The TNCE Tuya WiFi Smart Circuit Breaker (Model: WTDZW-63A) is an advanced electrical safety device that combines traditional overload and short-circuit protection with modern smart home capabilities. It features Wi-Fi connectivity, allowing for remote control and real-time status monitoring via the Tuya Smart or Smart Life mobile application. This integration enables intelligent electrical safety management, energy metering, and compatibility with voice assistants like Amazon Alexa and Google Home.

TNCE Smart Circuit Breaker with app interface and smart home logos

Figure 1: TNCE Smart Circuit Breaker with mobile app display and smart home compatibility.

2. Important Safety Warnings

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN FIRE, ELECTRIC SHOCK, SEVERE PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE.

Professional Installation & Operation Warning:

  • This circuit breaker must be installed inside a distribution board/panel compliant with local regulations.
  • Installation, wiring, commissioning, and maintenance MUST be performed ONLY by a qualified and licensed electrician.
  • End-users are STRICTLY PROHIBITED from opening the distribution board or operating the breaker without professional supervision.
  • Before any work, the upstream power supply MUST be disconnected, and the absence of voltage in the entire panel MUST be verified.

Electrical Safety Warning:

  • NEVER exceed the rated current (63A). The total connected load must be calculated with an appropriate safety margin.
  • After a trip, the root cause (e.g., overload, short circuit) MUST be identified and eliminated by an electrician before attempting any local or remote reset.
  • This product provides protection but is NOT a substitute for basic protection against electric shock.

Usage Environment Warning:

  • For INDOOR USE ONLY. The installation environment must be dry, well-ventilated, and free from corrosive gases.
  • NEVER install or use in flammable, explosive atmospheres or outdoor exposed locations.

3. Package Contents

Please check the package for the following items:

  • WTDZW-63A Smart Wi-Fi Circuit Breaker Host × 1
  • User Manual (this booklet) × 1
Smart MCB and instruction manual

Figure 2: Package contents including the smart circuit breaker and user manual.

4. Setup

4.1. Mounting

The circuit breaker is designed for 35mm DIN Rail Mount installation within a compatible distribution board/panel.

Dimensional drawing of the circuit breaker

Figure 3: Dimensions of the TNCE Smart Circuit Breaker.

4.2. Wiring Diagram

Ensure proper wiring by following the diagram below. All wiring must be performed by a qualified electrician.

Wiring diagram for multiple circuit breakers on a DIN rail

Figure 4: Wiring diagram for connecting multiple circuit breakers on a 35mm DIN rail. Connect 'N' (Neutral) and 'L' (Live) from the power supply to the respective 'N' and 'L' terminals on the top of the breaker, and connect the load to the 'N' and 'L' terminals at the bottom.

4.3. Network Configuration (App Setup)

Note: Network setup is performed after professional installation and power-on. An electrician must be present to ensure safety.

  1. Preparation:
    • Connect your phone to a 2.4GHz Wi-Fi network (5GHz Wi-Fi is not supported).
    • Download, install, and open the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.