1. Introduction
Thank you for choosing the FOMITO Camera Battery and Memory Card Storage Case. This manual provides essential information for the safe and effective use of your new storage case. Please read it thoroughly before use and retain it for future reference.

Figure 1: FOMITO Camera Battery and Memory Card Storage Case (Example Configuration)
2. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture beyond its rated resistance.
3. Product Overview
The FOMITO storage case is designed to protect and organize your camera batteries and memory cards. It features a durable shell and a high-density EVA foam interior for impact and weather protection.
Key Features:
- High Capacity: Stores 4 camera batteries and up to 15 memory cards (7 SD, 2 CFA, 2 CF, 2 TF, 2 XQD).
- Universal Battery Compatibility: Fits various models including LP-E6, LP-E8, NP-FZ100, EN-EL15, NP-FW50, NP-W126, NP-W235, DMW-DCC17/DCC8, and others, supporting batteries up to 58mm x 40mm x 22mm.
- Robust Protection: Military-grade shock, water, dust, and scratch-resistant PP shell with a molded rubber interior and EVA foam liner.
- Secure Fit: Precision-cut, non-slip compartments hold items firmly in place.
- Compact Design: Heavy-duty yet slim for easy travel.

Figure 2: Product Features and Compatibility

Figure 3: Internal Dimensions and Foam Protection

Figure 4: Example of Stored Items and Capacity
4. Setup
The FOMITO storage case requires no assembly. Simply open the case to begin organizing your gear.
Opening the Case:
- Locate the snap fastener on the front of the case.
- Gently lift the fastener to release the lid.
- Open the lid to access the internal compartments.

Figure 5: Quick Release Mechanism
5. Operating Instructions
Storing Batteries and Memory Cards:
- Open the case as described in the Setup section.
- Carefully place your camera batteries into the four larger slots in the bottom section of the case. Ensure they fit snugly within the EVA foam.
- Insert your memory cards (SD, CF, XQD, TF, CFA) into the designated smaller slots in the lid section. Each card type has a specific slot shape for a secure fit.
- Once all items are placed, ensure they are seated properly and do not protrude above the foam.
Closing the Case:
- Gently close the lid, ensuring no items are obstructing the closure.
- Press down on the snap fastener until it clicks securely into place. This ensures the case is sealed and your gear is protected.
Video 1: Product Demonstration (Shows opening, closing, and item placement)
6. Maintenance
Cleaning:
- Wipe the exterior of the case with a soft, damp cloth.
- For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, damp cloth.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the case material.
- Ensure the case is completely dry before closing or storing.
Storage:
- Store the case in a cool, dry place away from direct sunlight when not in use.
- Avoid placing heavy objects on top of the case for extended periods to prevent deformation.
7. Troubleshooting
Case does not close properly:
- Check if any battery or memory card is incorrectly placed or protruding from its slot.
- Ensure the snap fastener is aligned correctly before pressing to close.
Items feel loose inside:
- Verify that the correct size of battery/card is placed in the appropriate slot.
- For smaller batteries, consider adding a small piece of foam (not included) to ensure a snug fit.
8. Specifications
| Feature | Detail |
|---|---|
| Model | BOX-B1 |
| Brand | Fomito |
| Type | Camera Battery & Memory Card Storage Case |
| Battery Capacity | 4 slots (max. 58x40x22mm per battery) |
| Memory Card Capacity | 15 slots (7 SD, 2 CFA, 2 CF, 2 TF, 2 XQD) |
| Material | PP shell, EVA foam interior |
| Protection | Water-resistant, Impact-resistant, Dustproof, Scratchproof |
| Origin | Mainland China |

Figure 6: Outdoor Protection Features
9. User Tips
- Snug Fit for Smaller Batteries: If your batteries (e.g., LPE-17) feel a bit loose, you can cut small pieces from spare foam (if available) and place them in the slots to ensure a tighter fit.
- Organization within Larger Cases: This case is ideal for organizing batteries and cards within a larger camera bag or Pelican-style case, keeping critical gear protected and easily accessible.
- Preventing Damage: Proper organization helps prevent batteries from short-circuiting and memory cards from getting lost or damaged.
10. Frequently Asked Questions (FAQ)
- Q: Is the case fully waterproof?
- A: The case is designed to be water-resistant and rainproof, offering protection against splashes and light rain. It is not intended for submersion.
- Q: Are batteries and memory cards included?
- A: No, batteries and memory cards are not included with the storage case. They are shown for demonstration purposes only.
- Q: Can I store other small items in the case?
- A: While designed for batteries and memory cards, small accessories that fit securely within the compartments without compromising the seal can be stored. However, it is recommended to use it for its intended purpose to ensure optimal protection.
11. Warranty & Support
For any questions, support, or warranty inquiries, please contact your retailer or the manufacturer directly. Please refer to your purchase documentation for specific warranty terms and contact information.
Manufacturer Information:
Company Name: Shenzhen Jiying Digital Co., Ltd.
Address: Room 203, Building B, No. 55, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, China
Email: 21084923@qq.com
Telephone: +86-13802702408
EU Authorized Representative:
Company Name: Synertrade FR SAS
Address: 9 rue du Bat d'Argent, 69001 Lyon Rhone Auvergne-Rhone-Alpes, France
Telephone: +33-774555006