1. Product Overview
The RACBOX 7-inch Flush Mount LED Light Pods are versatile auxiliary lighting accessories designed for a wide range of vehicles including ATVs, vessels, buses, off-road vehicles, trucks, fire engines, motorcycles, forklifts, mining equipment, trains, and tanks. These lights can function as fog lights, daytime running lights, side lights, or reversing lights. They feature a durable 6063 aluminum housing, a combo beam pattern (flood + spot), and are available in 6000K white or 3000K amber color temperatures.

2. Specifications
Detailed specifications for the RACBOX Flush Mount LED Light Pods are provided below:

| Attribute | Value |
|---|---|
| Light Source | 16 COB 3030 LEDs |
| Light Beam | Combo Beam (Flood + Spot) |
| Nominal Power | 20W |
| Color Temperature | 6000K White / 3000K Amber |
| Nominal Luminous Flux | 2000 LM |
| IP Rating | IP67 |
| Input Voltage | DC 12-24V |
| Connection Method | 2 PIN Wire |
| Operating Temperature | -40°C to +80°C |
| Glass Material | PC |
| Housing Materials | Die-cast Aluminum 6063 |
| Accessories | Stainless Steel Bolts |
| Dimensions (approx.) | 186mm (L) x 60mm (W) x 35mm (H) |
3. Safety & Warnings
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture during installation or if not rated for such exposure.
4. Installation Instructions
These LED light pods are designed for flush mount installation. Follow these steps carefully:
- Turn off the vehicle engine and disconnect the power before beginning installation to prevent electrical hazards.
- Choose a suitable mounting position. Common locations include the front bumper, roof rack, or other stable surfaces on your vehicle.
- Fix the mounting bracket and work light securely using the provided screws or bolts.
- Adjust the light angle to your desired position and tighten all fasteners firmly to prevent movement.
- Connect the red positive wire from the light to the battery positive (+) terminal.
- Connect the black negative wire from the light to the battery negative (-) terminal.
- If your setup includes an external switch, connect the switch wire to the control line correctly according to the switch's instructions.
- Check all wiring connections to ensure they are secure and there are no short circuits.



5. Operation
Once installed and wired correctly:
- Turn on the vehicle's power and test the light to ensure normal lighting.
- Ensure the lights are aimed correctly. Do not use the lights in a manner that causes glare or obstructs the sight of other drivers, as this can be a safety hazard.


6. Maintenance
The RACBOX LED Light Pods are designed for durability and minimal maintenance. Key features contributing to their longevity include:
- Waterproof and Dustproof: With an IP67 rating, the fully sealed silicone housing prevents water and dust ingress, eliminating worries about fogging or internal damage.
- Diecast Aluminum Housing: The 6063 aluminum alloy profile ensures fast heat dissipation, which is crucial for the lifespan of LED components. It has passed salt spray tests, indicating resistance to harsh environments.
- Air Valve: An integrated air valve exhausts hot gas and balances air pressure, further protecting internal components.
To maintain optimal performance:
- Periodically clean the lens with a soft cloth and mild soap to remove dirt and debris that may obstruct light output.
- Inspect wiring connections annually for any signs of corrosion or loosening. Tighten as necessary.
- Avoid using abrasive cleaners or solvents on the light housing or lens.



7. Troubleshooting
If you encounter issues with your RACBOX LED Light Pods, consider the following:
- Light not turning on: Check all wiring connections for proper contact and ensure the red wire is connected to positive (+) and black to negative (-). Verify that the vehicle's power is on and the switch (if installed) is functioning correctly. Check for blown fuses in the vehicle's electrical system.
- Dim or flickering light: This could indicate a loose connection or insufficient power supply. Re-check wiring and battery voltage.
- Moisture inside the lens: While rated IP67, extreme temperature changes can sometimes cause condensation. If persistent, ensure the housing is not damaged and the air valve is clear.
For persistent issues, refer to the Warranty & Support section.
8. User Tips
- Users report excellent brightness, especially for the white light option, and good overall quality. Consider the white light option for maximum illumination.
- The flush mount design allows for a clean, integrated look. Take time to measure and cut accurately for the best fit.
- The combo beam provides both wide flood illumination and a focused spot beam, making it versatile for various driving conditions.
9. Compliance Information
This product is an auxiliary accessory for automotive lighting and is intended only for the normal replacement and upgrade of original car lights. It is not for illegal modification or illegal use. The products meet relevant national automotive lighting industry standards, have undergone strict quality testing before leaving the factory, and are qualified for use.
10. Warranty & Support
RACBOX provides a limited warranty for this product. Please review the following details:


Standard Warranty
RACBOX represents and warrants to the first end-user (“End-User”) of the Product that the Product shall materially conform to Racbox’s published specifications in the user manual, subject to the terms and conditions below.
Warranty Period
The Warranty Period for a new Product: ONE Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.
What is Covered
The Standard Warranty provides support as well as replacement parts and shipping costs during the Warranty Period. Customers will be covered for “replacements parts”, “partial refund”, “full refund” in the Warranty Period on any product due to manufacturing defects of components or workmanship.
What is Not Covered
The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error and failure to follow instructions relating to Product’s use.
How to Get Warranty Service
If you are within our limited warranty and need to request a replacement part, please use the information below. We are here to help solve problems!

If you have any other questions, feel free to contact our customer support, either by phone, email, or through our Live Support system.
Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com
For further assistance, you may also refer to the User Manual (PDF).