1. Introduction
The KKMOON ZN-MT25 is a portable, rechargeable 5-in-1 air quality detector designed for home use. It utilizes semiconductor, infrared, and electrochemical detection technologies to precisely monitor Carbon Dioxide (CO2), Formaldehyde (HCHO), Total Volatile Organic Compounds (TVOC), temperature, and humidity. This device features a clear LCD TFT color screen for digital display of readings and is built with durable ABS material for long-lasting use.
2. Safety Information
Please read all safety instructions before using the device to ensure proper operation and to prevent damage. Keep the device away from water and extreme temperatures. Do not attempt to disassemble or modify the device, as this will void the warranty and may cause harm. Use only the provided USB cable for charging.
3. Package Contents
Verify that all items are present in your package:
- 1 x Air Quality Detector (ZN-MT25)
- 1 x USB Cable (Type-C)
- 1 x Instruction Manual (PDF version available at official PDF link)
4. Product Overview
The ZN-MT25 features a compact design with a clear LCD display and ventilation openings for accurate detection.
Key Components:
- LCD TFT Color Screen: Displays real-time readings for CO2, HCHO, TVOC, temperature, humidity, and battery status.
- Power Key: Located on the side for turning the device on/off and for unit switching.
- Type-C USB Charging Port: For convenient charging of the built-in battery.
- Ventilation Openings: Located on both sides and the back to ensure improved airflow circulation for precise detection.
5. Specifications
| Feature | Detail |
|---|---|
| Item Type | Air Quality Detector |
| Material | ABS |
| Display | LCD TFT Color Screen Digital Display |
| Working Voltage | 3.7V |
| Charging Method | DC 5V 500mA TYPE C USB |
| Sensors | PM2.5 Infrared Sensor, Semiconductor Sensor |
| Battery | 3.7V Rechargeable Lithium Cell 1200mAh x 1 (Built-in) |
| Size (Approx.) | 90x70x35mm / 3.54x2.76x1.38in |
| Charging Time | 4 Hours |
| Standby Time | About 300-360 Minutes |
| Battery Included | No (Built-in battery is not considered 'included' as a separate item) |
| DIY Supplies | Electrical |
6. Setup
6.1 Initial Charging
Before first use, fully charge the device. Connect the provided Type-C USB cable to the charging port on the side of the detector and plug the other end into a 5V 500mA USB power adapter (not included). The charging time is approximately 4 hours.
7. Operating Instructions
7.1 Power On/Off
- To turn on the device, press and hold the power key (blue button on the side) for 3 seconds. The detector will automatically begin detection.
- To turn off the device, press and hold the power key for 3 seconds.
7.2 Function Control (Short Press Power Key)
The power key also serves multiple functions with short presses:
- One press: Switch temperature unit between Celsius (℃) and Fahrenheit (℉).
- Two presses: Turn the sound (alerts/beeps) on or off.
- Three presses: Enter calibration mode. (Refer to advanced usage for calibration details).
- Four presses: Enter sleep mode. Press once again to wake up the device.
7.3 Understanding the Display
The LCD TFT color screen provides real-time data for various parameters:
- CO2: Carbon Dioxide concentration in parts per million (ppm).
- HCHO: Formaldehyde concentration in milligrams per cubic meter (mg/m³).
- TVOC: Total Volatile Organic Compounds concentration in milligrams per cubic meter (mg/m³).
- TEMP: Ambient temperature in Celsius (℃) or Fahrenheit (℉).
- HUMI: Relative humidity in percentage (%).
- Battery Indicator: Shows the current battery level. The device can work continuously for up to 7 hours on a full charge.
8. Maintenance
8.1 Cleaning
Wipe the device gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Ensure the ventilation openings are free from dust and obstructions.
8.2 Storage
When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the device periodically to maintain battery health.
9. Troubleshooting
- Device does not turn on: Ensure the device is fully charged. Connect it to a power source using the USB-C cable and try again after a few minutes.
- Inaccurate readings: Ensure the device is placed in an area with good airflow and away from direct sources of pollutants or strong drafts. Allow the device to stabilize for a few minutes after powering on. Consider entering calibration mode if readings seem consistently off (refer to section 7.2).
- Battery drains quickly: Ensure the device is fully charged. Continuous operation for up to 7 hours is expected. If battery life is significantly shorter, contact support.
10. User Tips
- For best results, place the detector in the center of the room you wish to monitor, away from windows, doors, and ventilation systems.
- Allow the device to run for at least 10-15 minutes after powering on for the sensors to stabilize and provide accurate readings.
- Regularly check the battery level, especially before long monitoring sessions, to ensure uninterrupted operation.
11. Warranty and Support
For warranty information or technical support, please refer to your purchase documentation or contact the retailer. Keep your proof of purchase for any warranty claims.