Important Safety Information
Thank you for purchasing the BYINTEK U14 Pro Projector. To ensure your safety and proper operation, please read this manual carefully before use and keep it for future reference. The manufacturer is not responsible for any losses caused by non-standard operation.
General Precautions:
- When the projector is operating, do not block the air vents or power outlet. This prevents damage to internal electronic components due to insufficient heat dissipation.
- To protect your eyes, avoid looking directly into the projector lens.
- To prevent damage to the lens, do not use paper, cloth, or other abrasive cleaning tools directly on the lens. Use a dust-free cloth or wipe gently with alcohol.
- Ensure the projector is used in a dry and well-ventilated environment.
- Do not store the projector in excessively hot or cold conditions. High or low temperatures can shorten the lifespan of electronic devices. The recommended storage and operating temperature range is 0°C to 40°C (32°F to 104°F).
- Do not place the projector in or on any heating equipment (e.g., dryer, microwave oven) to dry it.
- Avoid dropping or hitting the product from a height to prevent equipment damage.
- Always use the power adapter supplied with the product. If the power adapter is damaged, contact the manufacturer for assistance.
- Do not disassemble the product without permission if any issues arise. Contact professional after-sales personnel for support.
Attention:
If there are inconsistencies between the manual content and the actual product, the actual product shall prevail. If you have any objections to the manual's content, please submit a written objection within seven days of purchase. Otherwise, you are deemed to have agreed, understood, and accepted the entire content of this manual.
Product Overview
The BYINTEK U14 Pro is a versatile projector designed for home theater and gaming. It features Android 11, Bluetooth 5.0, Wi-Fi connectivity, and automatic keystone correction for an optimal viewing experience.
Figure 1: BYINTEK U14 Pro Projector
Figure 2: Projector Front View (from User Manual cover)
Setup Guide
1. Power On
- Connect the power cord to the projector and a power outlet.
- Press the power button on the projector or the remote control to turn on the projector.
Figure 3: Connecting Power
Figure 4: Powering On
2. Adjusting Focus
- Press the F+ or F- buttons on the remote control to adjust the image focus until it is clear.
Figure 5: Adjusting Focus
3. Language Settings
- Navigate to: Settings --> General Settings --> Language Settings.
4. Keystone Correction
- For automatic adjustment: Go to Settings --> Projection Settings --> Keystone Settings --> Auto Keystone WithMove: On/Off.
- For manual four-corner correction: Go to Settings --> Projection Settings --> Fast Keystone Correction.
Figure 6: Projection Angle Adjustment
5. Wi-Fi Connection
- Navigate to: Settings --> Network Settings --> Wi-Fi. Select your network and enter the password.
6. Ceiling Mounting
- Remove the 4 machine foot pads from the bottom of the projector to prepare for hoisting (ceiling mount).
- Adjust projection mode: Go to Settings --> Projection Settings --> Projection mode to select the appropriate projected image orientation.
Figure 7: Preparing for Ceiling Mount
Operating Instructions
Remote Control Functions
Figure 8: Remote Control Layout
- Signal indicator
- Power Key
- Arrow keys (Navigation)
- Home Key
- Return Key
- Volume+
- Volume-
- Source key (Input selection)
- Confirmation key (OK/Enter)
- Menu
- Mute Key
- Focus+
- Focus-
- Mouse (Activates mouse control for certain apps)
Connecting External Devices (HDMI)
- Connect your PC, game console, DVD player, or TV box to the projector's HDMI port using an HDMI cable.
- On the remote control, press the Source key and select "HDMI1" or "HDMI2" to switch to the desired HDMI input.
Figure 9: HDMI Connectivity
Reading Files from USB
- Insert a USB flash drive into the USB port on the projector.
- On the remote control, press the Source key and select "USB".
- It is recommended to use USB flash drives with less than 32GB of memory for optimal recognition.
Mouse Control for Applications
- For applications that cannot be controlled with the standard remote functions, briefly press the Mouse button on the remote to activate mouse control.
- For advanced applications like Chrome and YouTube, using a mouse (either via remote control mode or an external USB mouse) is recommended for comprehensive and fast operation.
Restoring Factory Settings
- Navigate to: Settings --> System settings --> Restore Factory Settings.
Maintenance
Cleaning the Lens
- Use a dust-free cloth or gently wipe the lens with alcohol. Avoid using paper, rough cloths, or other abrasive materials that could scratch the lens.
Environmental Conditions
- Ensure the projector is always used in a dry and well-ventilated area to prevent overheating.
- Do not expose the projector to extreme temperatures (below 0°C or above 40°C) as this can shorten its lifespan.
- Keep the air vents clear of obstructions during operation.
Troubleshooting
Projector Does Not Turn On
- Confirm that the power plug is fully inserted into a live power outlet. The button indicator light should be red and blue during normal operation.
- Ensure the power is correctly switched on. When using the remote control, aim it directly at the remote control receiver located on the product.
Projector Freezes
- If the projector freezes, power it off and then restart it.
Unclear Focus
- If autofocus is not responding, it might be disabled. Manually adjust focus using the F+ and F- buttons on the remote.
- If autofocus is blurry (responding but not clear), you can also manually adjust focus using the F+ and F- buttons.
Remote Control Not Working
- If the remote control is not functioning correctly, aim it at the remote control receiver in front of the projector lens.
- Some software controls require activating mouse mode by pressing the Mouse button. For advanced applications like Chrome and YouTube, a mouse is recommended for full functionality.
Software Pop-up Issues
- If a pop-up window prompts for an update when opening software, press the Return key to cancel the update.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | BYINTEK |
| Model | U14Pro |
| Category | Projectors |
| System | Android 11 |
| Projection Technology | LCD |
| Light Source | LED |
| Projector Lamp Life | 50,000 hours |
| Brightness | 1500 Lumens (ANSI) |
| Optical Resolution | 1920x1080dpi (Full HD) |
| Support Resolution | 2K, 4K (from HD signal, support HD ARC from HD2) |
| Contrast Ratio | 20000:1 |
| Projected Dimension | 30-300 inches |
| Projection Distance | 1.07-12m |
| Screen Scale | 16:09 |
| Keystone Correction | Manual Correction, Electronic Correction, Auto Correction |
| Projector Lens | Auto focus |
| Projector Image Flip | 360 degree flip |
| Input/Output | Type-C, VGA, POWER, USB |
| Bluetooth-compatible | Yes |
| Built-in Speaker | Yes (12W*2 Speakers) |
| Remote controller included | Yes |
| Support MEMC | Yes |
| HDR 10 | Yes |
| Power Source | AC |
| Power (W) | 180W |
| Weight | 4.2kg |
| Dimensions (Package) | 36cm (L) x 31cm (W) x 24cm (H) |
| Certifications | CE, FCC, RoHS |
Figure 10: Closed Optical Engine Design
Figure 11: MEMC Feature
Figure 12: Brightness and Resolution Capabilities
User Tips
- **External Sound System**: While the built-in speakers are good and loud, for a more immersive "cinema-like effect," consider connecting an external sound system. This can also help if the projector's fan noise is noticeable in quiet moments.
- **File System Compatibility**: The standard player may not read flash drives formatted with exFAT. Installing a third-party media player like VLC can resolve compatibility issues for various file formats.
- **Brightness**: The projector offers good brightness, allowing for viewing even in rooms that are not completely dark.
- **Color Adjustment**: If you notice unnatural red tones, especially in static images, check the projector's color settings. Some users find the "warm color temperature" setting pleasing.
- **RAM/Storage**: For smoother performance with multiple apps, consider the projector's RAM and storage. While the device has 2GB RAM and 32GB storage, heavy multitasking might benefit from optimizing app usage.
Warranty and Support
The BYINTEK U14 Pro Projector comes with a 1-Year warranty. For any product issues or warranty claims, please contact the manufacturer or the professional after-sales service personnel.
For more detailed instructions and video tutorials, you can scan the QR code on the first page of the original user manual or visit the official BYINTEK website: www.byintek.com.
A PDF version of this user manual is available for download: User Manual (PDF).
Warranty Card Information:
Please retain your purchase receipt and fill out the warranty card with the following details:
- Customer Name: _________________________
- Telephone No.: _________________________
- Address: _________________________
- Model No.: U14 Pro
- Serial No.: _________________________
- Date Of Purchase: _________________________
- Remark: _________________________