DNVYUAX 8NB1003655

Contents

Digital Cable Tracking Networking Cable Tester User Manual

Model: 8NB1003655

1. Introduction

This manual provides instructions for the safe and effective use of the Digital Cable Tracking Networking Cable Tester. This versatile tool is designed for professionals and enthusiasts alike, offering comprehensive solutions for network and telephone line management. It integrates wire tracing, tone generation, line testing, and non-contact voltage detection capabilities.

Digital Cable Tracking Networking Cable Tester main unit and receiver
Figure 1: Digital Cable Tracking Networking Cable Tester (Main Unit and Receiver).

2. Safety Information

WARNING:

  • Avoid contact with water.
  • Do not disassemble the device by non-professionals. Unauthorized disassembly may void the warranty and pose safety risks.
  • The device features 60V voltage protection. While designed for safety in power cable environments, always exercise caution when working with live circuits.
Cable tester with a shield icon indicating 60V voltage protection
Figure 2: 60V Voltage Protection for safe operation.

3. Package Contents

Verify that all items listed below are included in your package:

  • 1 x Networking Cable Finder (Main Unit)
  • 1 x Wire Tracker Receiver
  • 1 x Storage Bag
  • 1 x Headphones
  • 1 x Clips
  • 1 x Networking Cable
  • 1 x Phone Cable
  • 1 x User Manual (this document and a PDF version)
  • 1 x Packaging Box
Cable tester being stored in a black carrying bag
Figure 3: The cable tester and its included storage bag for portability.

4. Features

  • **Multi-Port Compatibility**: Supports both RJ45 (Ethernet) and RJ11 (telephone line) interfaces for versatile cable detection.
  • **Voltage Protection**: Features 60V voltage tolerance for safe operation in power cable environments, minimizing risks of electric shock or device damage.
  • **Non-Contact Voltage (NCV) Detection**: Advanced NCV technology identifies live wires without direct contact, enhancing safety during cable tracing and maintenance.
  • **Multifunctional Design**: Combines wire tracing, tone generation, and line testing in a single tool for quick cable location, connection verification, and transmission checks.
  • **Headphone Port**: Includes a 3.5mm port for real-time auditory feedback via headphones, improving accuracy and flexibility during cable identification and troubleshooting.
  • **Integrated Wire Search, End Flash, and Line Matching**: Streamlines the process of locating cables, identifying switch ports, and verifying line integrity.
Diagram showing the 3-in-1 upgrade features: wire search, end flash, and line matching in a network environment.
Figure 4: Illustration of the 3-in-1 functionality: Wire Search, End Flash, and Line Matching.

5. Specifications

Attribute Value
Product Name RJ45 RJ11 cable investigator
Model 8NB1003655
Brand Name DNVYUAX
Component ABS, metal
Product Size 175 x 88 mm (6.89 x 3.46 inches)
Product Weight 180g
Color Green
Interfaces RJ45, RJ11
Withstand Voltages 60V
Battery Capacity 1500mAh
Origin Mainland China
Certification NONE
Dimensions of the cable tester showing 175mm/6.89in length and 88mm/3.46in width
Figure 5: Product dimensions.

6. Setup

Before operating the device, ensure the battery is sufficiently charged. The device consists of two main parts: the main unit (Wire Tracker) and the receiver (Wire Tracker Receiver).

  1. **Power On**: Press the 'Power' button on both the main unit and the receiver to turn them on.
  2. **Cable Connection**:
    • For RJ45 cables: Connect one end of the network cable to the RJ45 port on the main unit.
    • For RJ11 cables: Connect one end of the phone cable to the RJ11 port on the main unit.
    • For testing cables connected to a switch, connect the main unit to the port you wish to test.
  3. **Headphones (Optional)**: For improved accuracy in noisy environments, plug the included headphones into the 3.5mm port on the receiver.
Cable tester main unit connected to a network switch with blue Ethernet cables
Figure 6: Main unit connected to a network switch for testing.

7. Operating Instructions

The cable tester offers multiple functions accessible via the 'FUNC' button on the main unit and the receiver.

7.1. Wire Tracing (SCAN Mode)

Use this mode to locate a specific cable among a bundle or trace its path.

  1. Connect the cable to be traced to the main unit's RJ45 or RJ11 port.
  2. On the main unit, press the 'FUNC' button until the 'SCAN' indicator light is active.
  3. Take the receiver and move its tip along the cables. The receiver will emit an audible tone, which will be strongest when near the target cable.
  4. Adjust the sensitivity on the receiver if necessary to pinpoint the cable more accurately.

7.2. Port Flashing (End Flash)

This function helps quickly locate the corresponding port on a switch or router for a connected cable.

  1. Connect one end of the network cable to the main unit.
  2. Connect the other end of the cable to a port on the network switch.
  3. On the main unit, press the 'FUNC' button until the 'FLASH' or 'END FLASH' indicator is active (refer to the unit's specific labeling).
  4. The corresponding port indicator light on the network switch will flash, allowing for quick identification.
Close-up of the cable tester's main unit connected to a network switch, demonstrating the port flashing function.
Figure 7: Port Flashing function in action, identifying a switch port.

7.3. Non-Contact Voltage (NCV) Detection

The NCV feature allows for detecting live AC voltage without direct metallic contact.

  1. On the main unit, activate the NCV mode (if available as a separate function, otherwise it may be integrated into the receiver's detection).
  2. Hold the receiver's tip near the cable or wire you suspect has live voltage.
  3. If live voltage is detected, the receiver will emit an audible alarm and/or visual indicator.

7.4. Line Testing (TEST/VERIFY Mode)

This mode checks the continuity and wiring sequence of network and telephone cables.

  1. Connect one end of the cable to the main unit's RJ45/RJ11 port and the other end to the receiver's corresponding port.
  2. On the main unit, press the 'FUNC' button until the 'TEST' or 'VERIFY' indicator is active.
  3. Observe the LED indicators on both the main unit and the receiver. They will light up sequentially, indicating the wiring order.
  4. Any discrepancies (e.g., open circuits, shorts, crossed pairs) will be indicated by non-lighting LEDs or irregular sequences.

8. Maintenance

  • **Cleaning**: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
  • **Storage**: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag to protect it from dust and physical damage.
  • **Battery**: Recharge the 1500mAh battery as needed. If storing for extended periods, charge the battery periodically to maintain its health.

9. Troubleshooting

  • **No Power**: Ensure the battery is charged. If the device does not turn on, try charging it for a few hours.
  • **No Tone/Signal during Tracing**:
    • Check if the main unit is in 'SCAN' mode.
    • Ensure the cable is properly connected to the main unit.
    • Adjust the sensitivity on the receiver.
    • Verify the battery level of both units.
  • **Incorrect Line Test Results**:
    • Ensure both ends of the cable are securely connected to the main unit and receiver.
    • Check for visible damage to the cable or connectors.
    • Ensure the device is in 'TEST' or 'VERIFY' mode.
  • **Device Not Responding**: Try turning the device off and on again. If the issue persists, ensure the battery is fully charged.

10. User Tips

  • **Organize Cables**: Before tracing, try to organize cable bundles as much as possible to make identification easier.
  • **Use Headphones**: In noisy environments, using headphones significantly improves the accuracy of wire tracing by isolating the tone.
  • **Test Known Good Cables**: Periodically test the device with a known good cable to ensure it is functioning correctly.
  • **Battery Management**: Always keep the device charged, especially before starting a long task, to avoid interruptions.

11. Warranty and Support

For product support, technical assistance, or warranty inquiries, please contact the manufacturer:

  • **Manufacturer**: Shenzhen Chiyi Technology Co., Ltd
  • **Address**: 401-43, Buildings 2 and 3, M-10, Maqueling Industrial Zone, Maling Community, Yuehai Street, Nanshan District, Shenzhen, China
  • **Email/Tel**: smtsykj@163.com / 17722493418

A detailed user manual in PDF format is also available for download. You can access it via the following link: View User Manual (PDF).

© 2024 DNVYUAX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.