YIERYI YY-1104

Contents

YIERYI YY-1104 6-in-1 Soil Tester

Instruction Manual

1. Introduction

The YIERYI YY-1104 is a professional 6-in-1 soil tester designed to provide comprehensive analysis of your soil's health. This device accurately measures soil fertility, NPK (Nitrogen, Phosphorus, Potassium) content, humidity, and temperature, offering essential data for effective plant care and cultivation. Its user-friendly design, including a 90-degree rotatable display and clear LCD, makes it suitable for various applications from home gardening to agricultural use.

YIERYI 6-in-1 Soil Tester in a garden setting
Figure 1: YIERYI YY-1104 6-in-1 Soil Tester

2. Safety Precautions

  • This device is an electronic instrument. Avoid dropping or subjecting it to heavy impact.
  • The device is not waterproof. Do not immerse it in water or use it in heavy rain.
  • Keep out of reach of children.
  • Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage.
  • Use only the specified battery type (3x AAA).

3. Package Contents

  • 1 x YIERYI YY-1104 6-in-1 Soil Tester
  • 1 x Instruction Manual (this document)

Note: AAA batteries are not included and must be purchased separately.

4. Device Overview

Labeled diagram of the YIERYI YY-1104 soil tester
Figure 2: Labeled components of the YY-1104 Soil Tester
  1. Hook: For hanging or storage.
  2. Display Screen: Large LCD for showing readings (Fertility, NPK, Temperature, Humidity, Battery Level).
  3. ON/OFF Switch: Powers the device on or off.
  4. MODE Button: Short press to cycle through measurement functions (Fertility, N, P, K). Long press to switch temperature units (°C/°F).
  5. Probe: Dual stainless steel probes for insertion into soil.
  6. Battery Compartment: Located at the back, for 3x AAA batteries.

5. Setup

5.1. Battery Installation

  1. Locate the battery compartment on the back of the device.
  2. Open the battery cover.
  3. Insert 3 x 1.5V AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery cover securely.

6. Operating Instructions

6.1. Powering On/Off

  • Powering On: Press the ON/OFF button. The screen will display a full image for 3 seconds before entering the measurement readiness state.
  • Powering Off: While the device is powered on, press the ON/OFF button once to switch it off. The device also features an auto-shutdown function after 3 minutes of inactivity.

6.2. Taking a Measurement

  1. Prepare the Soil: Ensure the soil is moist enough for accurate readings. If the soil is very dry, water it and wait 20-30 minutes before testing.
  2. Insert the Probe: Gently insert the dual probes into the soil sample to be tested. Ensure a minimum insertion depth of 10cm (approximately 4 inches) for optimal contact. Avoid striking stones or applying excessive force, as this may damage the probes.
  3. Select Function: After powering on, the device will typically display Fertility. Short press the MODE button to cycle through the measurement functions in the following sequence: Fertility → Nitrogen (N) → Phosphorus (P) → Potassium (K).
  4. Read the Display: Allow the reading to stabilize on the screen. The display will show the selected parameter (e.g., NPK in mg/kg, Fertility in µS/cm), temperature (°C/°F), and humidity (%).
  5. Switch Temperature Units: To switch between Celsius (°C) and Fahrenheit (°F), press and hold the MODE button for 6 seconds.

6.3. Interpreting Readings

The device provides real-time data. Refer to the soil nutrient grading scale below for general guidance on NPK levels.

Table of soil nutrient grading scale
Figure 3: Soil Nutrient Grading Scale
ClassificationN (mg/kg)P (mg/kg)K (mg/kg)Fertility level
One>150>40>200High
Two120-15020-40150-200Rich
Three90-12010-20100-150Medium
Four60-905-1050-100Deficient
Five<60<5<50Extremely deficient

Standards vary by soil to soil, depending on crop requirements. General standards for cultivated soil: Nitrogen: 150-200mg/Kg, Phosphorus: 60-100mg/Kg, Potassium: 100-150mg/Kg.

6.4. Applicable Soil Types

The YY-1104 is suitable for common well-mixed soils and natural plant soils. It is NOT suitable for:

  • Hard Soil Rocks
  • Organic Coconut Fiber
  • Natural Sandy Soil
  • Soil with Full Roots / Water Plants
Diagram showing suitable and unsuitable soil types for testing
Figure 4: Suitable and Unsuitable Soil Types

7. Maintenance

  • Cleaning the Probe: After each measurement, switch off the instrument, rinse the probes with clean water, and wipe them dry with a soft cloth. Do not use abrasive materials or harsh chemicals.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If not in use for an extended period, remove the batteries to prevent leakage.
  • Do not leave the instrument inserted in soil for extended periods. Soil's acidic properties may corrode the probe over time, compromising accuracy and service life.

8. Troubleshooting

ProblemPossible CauseSolution
Device does not turn onBatteries are dead or incorrectly installed.Replace batteries or check polarity.
Inaccurate or fluctuating readingsPoor probe contact with soil; soil too dry; unsuitable soil type; probes are dirty.Ensure full probe contact (min 10cm depth); moisten soil; check soil type suitability; clean probes thoroughly. Employ multi-point sampling and average readings for better accuracy.
Low battery indicator flashingBatteries are low.Replace all three AAA batteries.
Cannot insert probe into soilSoil is too hard or contains obstructions.Do not force the probe. Relocate to a different test point.

9. Specifications

Table of product specifications
Figure 5: Product Specifications
FeatureDetail
ModelYY-1104
Name6-in-1 Soil Tester
FunctionsNPK, Fertility, Humidity, Temperature
NPK Range0~1999 mg/kg
Fertility Range0~1999 µS/cm
Humidity Range0% ~ 99%
Temperature Range0°C ~ 60°C (32°F ~ 140°F)
Display TypeDIGITAL (Large LCD with Backlight)
Screen Feature90° Foldable / Rotatable
Auto Shutdown5 minutes (inactivity)
Battery Type3 * 1.5V AAA Batteries (Not included)
Probe MaterialHigh-Quality Stainless Steel (5mm diameter, 210mm length)
Device MaterialDurable ABS
Dimensions265 * 58 * 38mm
Weight102g (without batteries) / 145g (with packaging, without batteries)

10. User Tips

  • Quick Results: Users appreciate that the device provides quick and clear results, making soil analysis efficient.
  • Multi-Point Sampling: For the most accurate assessment of your garden or farm, take several readings from different spots within the same area and average the results.
  • Soil Moisture is Key: Ensure the soil is adequately moist before testing. Very dry soil can lead to inaccurate or no readings.
  • Probe Depth: Always insert the probes to at least 10cm depth to ensure good contact with the soil and reliable measurements.

11. Frequently Asked Questions (FAQ)

Q: Does this device measure soil pH (acidity)?
A: No, this device does not measure soil pH. It is designed to measure NPK (Nitrogen, Phosphorus, Potassium), Fertility, Humidity, and Temperature.
Q: Can I use this tester for potted plants?
A: Yes, the YIERYI YY-1104 is suitable for potted plants, as long as the soil type is appropriate (well-mixed or natural plant soil) and the pot size allows for the probe to be inserted to the recommended depth.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

© 2024 YIERYI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.