MYOSLIM EMS Inner Ball Roller Body Shaping Machine User Manual

1. General Information

The MYOSLIM EMS Body Sculpt series utilizes advanced HI-EMT technology, employing high-energy focused electromagnetic waves (HI-EMT) designed to induce powerful muscle contractions, thereby promoting muscle growth and reshaping the internal structure of muscles. Additionally, it triggers significant fat breakdown through intense muscle contractions, causing fatty acids to be released from triglycerides and metabolized by the body over several weeks.

Advanced HI-EMT Technology

The EMS Body Sculpt series employs advanced HI-EMT technology, utilizing high-energy focused electromagnetic waves to achieve intense muscle contractions, promoting muscle growth, and deep internal structural reshaping.

Touch-Controlled Display

The touch-controlled display significantly simplifies device operation, allowing clear visibility of information from various positions. The brightness of the display is adjustable to accommodate different office lighting conditions. User-friendly, the screen guides you throughout the entire treatment process.

Real-time Monitoring and Guidance

Throughout the treatment process, the display shows remaining treatment time, utilized channels and treatment methods, applied treatment types, attachments used, and other necessary information. This aids users in real-time monitoring of treatment progress and provides necessary guidance.

Upgradeability

As your therapeutic needs evolve, you may wish to upgrade your equipment later on. The EMS Body Sculpt series offers flexible upgrade options to meet your future treatment requirements.

1.1 Indications for Use

The EMS Body Sculpt is intended for:

1. Improvement of abdominal tone, strengthening of the abdominal muscles, development of fitter abdomen.
2. Strengthening, toning, and firming of buttocks, thighs, and calves.
3. Improvement of muscle tone and firmness, for strengthening muscles in arms.

1.2 Operating Environment

The operating environment of the EMS Body Sculpt instrument series is crucial to ensuring the effectiveness and safety of the device.

• Clean and Hygienic Environment: The operating environment should be clean and hygienic to prevent any external contamination or bacterial infections. Regular cleaning and disinfection of the equipment and its accessories are essential.
• Appropriate Temperature and Humidity: Ensure that the operating environment's temperature and humidity are within the appropriate range specified by the device manufacturer. Extreme temperatures or excessive dryness/humidity may impact the device's performance.
• Adequate Lighting: Provide sufficient lighting to ensure that operators can clearly see and operate the equipment correctly. This is especially important for conducting precise beauty procedures.
• Good Ventilation: The area where the equipment is operated should have adequate ventilation to ensure air circulation and prevent the accumulation of any harmful gases.
• Safety Measures: The operating environment should have appropriate safety measures, including fire extinguishers and first aid equipment, to address emergencies. Operators should be familiar with the equipment's safety procedures and know how to handle emergency situations.
• Avoidance of Interference Sources: The operating environment for beauty equipment should be kept away from any electromagnetic fields or other devices that could potentially cause interference, ensuring the normal operation of the equipment.
• Operator Training: All operators using beauty equipment should undergo proper training to understand the correct usage and safety procedures of the equipment.

1.3 Patient Profile

This machine is suitable for patients who are seeking healthy weight loss, who have no physical diseases, and who do not have metal substances in their bodies. Please note that this machine is only suitable for adults.

1.4 Description of the Device

EMS Body Sculpt enables a simple and effective treatment process that you can easily perform by adjusting the digital energy selection treatment plan or diagnostic procedure. Additionally, any treatment parameter can be manually adjusted by simply touching the screen. You can also create precise and effective treatment plans by configuring the age group and gender of the person being treated within the machine.

1.5 Contraindications

Do not use the device if any of the following apply:

• Wounds on the skin (or avoid using on wounded areas).
• Patients with heart disease (such as those with arrhythmias), especially those with pacemakers.
• Cancer patients.
• Patients with infectious diseases.
• Pregnant women, lactating women, or during menstrual period.
• Major surgery patients, diabetic patients.
• Having any metal in the body.
• People with cerebrovascular disease (stroke patients).

1.6 Possible Side Effects

These effects may include but are not limited to:

• Muscle soreness.
• Reduction in muscle fat.
• Temporary muscle spasms.
• Transient joint or muscle tendon pain.
• Localized redness or skin flushing.

2. Safety Precautions and Warnings

Before using the device, please observe the following precautions:

• Do not use the device when feeling full; wait at least one hour after meals.
• Before using the instrument, remove any metal jewelry you are wearing.
• Before starting the operation, touch the probe vertically to the skin, then turn on the switch of the main unit and adjust the intensity of the operation mode.
• Start at the lowest intensity level, and then increase the intensity sequentially according to the user's skin tolerance.
• It is forbidden to eat or drink during the operation. It is recommended to wait at least one hour after the operation before eating.

3. Device Overview and Accessories

3.1 Front and Rear Panel of the Main Unit

Front View: The main unit features a display screen and an EMS handle connection point.

Rear View: The rear panel includes the magnetic thin handle plug and the fuse compartment.

Note: The handle can only be used by the original machine and cannot be used interchangeably.

3.2 Handle

The device comes with two handles for application.

3.3 List of Accessories

Serial	Name	Quantity	Picture
1	Host (Main Unit)	1 set
2	Handle	2
3	7*100CM belt	2	Two belts for securing handles.
4	Power cable	1	Standard power cable.
5	Electronic manual	1 copy	Digital user manual.

4. Device Installation

1. Handle Film Application

   Apply the black film to the working part of the handle.

   

2. Installing the Handle

   Align the hole on the handle with the corresponding connection point on the machine and fasten the clip. Ensure the key ring is locked.

   

3. Connecting Power

   Connect one end of the power cord to the machine and plug the other end into a suitable power socket. Do not connect multiple machines to a single socket.

   

4. Pressing the Back Switch

   Locate the manual switch on the rear panel and move it to the "o" position to turn on the power (light will be on).

5. Pressing the Front Switch

   Press the button on the front panel to power on the device. A single click turns it on. To turn off, press and hold the power button.

5. Basic Device Operation

5.1 Handle Exchange

The handle must be calibrated every time it is installed or replaced. When replacing the handle, you must turn off the power of the machine. The handle cannot be replaced when the machine is powered on.

5.2 Device Start Up/Shut Down

1. Connect one end of the power cord to the machine and plug the other end into the socket. Plug the power cord directly into the main socket. Do not connect multiple machines to the socket.
2. Move the manual switch on the rear panel to the "o" position.
3. Press the button on the front panel.
4. When the treatment is finished, press and hold the power button to turn off the machine.

5.3 Navigation Controls & Setting the Therapy by Controls

Pre-treatment regimen can be modified via on-screen controls. The treatment interface displays the following items and functions:

• [1] Navigation controls: Used to navigate through menus.
• [2] Channels selector: Selects the active channels for treatment.
• [3] Stop therapy: Button to halt the current therapy session.
• [4] Start/pause therapy: Button to start or pause the therapy session.
• [5] Setting up therapy parameters: Adjusts various parameters for the therapy.

5.4 Unit Settings

The device offers various settings accessible through the touch screen.

The operation interface of mode 1 is as follows (please take out the handle from the handle frame before operation, and use the belt to fix the handle to the operating part required by the customer). The frequency of mode one is 5-60Hz.

The operation interface of mode 2 is as follows (Please take out the handle from the handle frame before operation, and use the belt to fix the handle to the operation required by the customer.part) The frequency of mode two is 30-100Hz.

Note: Adjust the corresponding intensity/stage frequency/time according to different customer needs. Click the start/pause button to enter the operation work, if any. When the customer requests to pause, they can click the start/pause work button to pause the work, and after the work is completed, they can directly click the return key to return.

6. Therapy

6.1 Preparing the Therapy

1. Communicate with patients.
2. Ensure good health.
3. Stay hydrated.
4. Wear appropriate clothing.
5. Avoid eating in large quantities.
6. Familiarize yourself with the treatment process.
7. Avoid drinking alcohol.

6.2 Placing the Handle

Please operate according to the controller model you purchased and follow the manufacturer's official documentation to ensure the best experience. If you have any questions, please contact customer service for support.

7. Maintenance and Repair

7.1 Maintenance

7.1.1 Daily Inspection

Managers must regularly inspect instruments and components. Check whether the power socket has a reliable connection to the ground. Please check whether the power cord of the instrument is damaged before use, and stop using the instrument if it is damaged.

7.1.2 Cleaning

Instrument cleaning is performed on a regular basis to ensure sanitation and proper functioning of the equipment. The device housing can be wiped with a damp cloth, soapy water or a neutral detergent while the instrument is powered off. The logo of the machine is painted by silk screen printing process. The rest of the parts are painted with a spray painting technique. Please use cotton paper towels or ordinary toilet paper moistened with water to wipe clean; do not use alcohol-based detergents.

7.1.3 Replacing the Fuse

When replacing the fuse, in order to prevent electric shock, please turn off the power and unplug the power plug. The fuse is set below the handle junction on the back of the machine. An additional spare fuse is included.

7.2 Repair

After purchasing the instrument, you need to fill in the warranty card and send it to the manufacturer or agent to have the effect of warranty; from the date of the purchase of the instrument, if the product quality problem which belongs to the company occurs, then the free Warranty is promised in one year; (Warranty needs warranty card and purchase bill, and the scope of warranty here is limited to the instrument host, excluding accessories and other consumables that need to be replaced regularly). After the warranty period has expired, please contact the manufacturer directly to provide paid after-sales service. To repair the machine, you must contact the company's business department or dealer, and do not repair it without authorization. Any unpacking without consent will not be guaranteed by our company.

8.3 Cleaning of Accessories That Come Into Contact With Patient

The parts that come into contact with the skin should be cleaned and disinfected with 75% alcohol before and after use. Do not soak directly in alcohol-based detergent as a whole, wipe with pure cotton material.

8.4 Transport and Storage

Storage

The instrument should be stored in the original packaging box, placed in a well-ventilated room. The packaging box should be padded, the ambient temperature should be -10°C ~ 40°C, the relative humidity should not be greater than 93%, and it is not allowed to be placed in harmful gases, around flammable, explosive substances and corrosive gases.

Transportation

The instrument under the packaging condition is suitable for road, railway, air and water transportation. During loading, unloading and transportation, it should prevent severe vibration and shock, and should not be affected by moisture, and should not be mixed with flammable and corrosive substances, and the specific requirements are specified in the order contract.

8.6 Common Faults and Troubleshooting Methods

9. Technical Specifications

9.1 Electromagnetic Compatibility (Radiated Electromagnetic Field Immunity Test)

Test Equipment

Block Diagram of Test Setup

10. Warranty and Support

Warranty Card

1. The machine can be replaced with a new one within 7 days from the date of purchase (with the receipt) with the intact appearance. The main machine is guaranteed for one year (except for fragile parts, and other non-warranty scope or expired warranty period). Maintenance and updates will be charged appropriately. If the instrument is broken and needs to be sent back for repair, the buyer shall bear the return shipping cost within six months from the date of purchase, and the seller shall bear the shipping in cost; the buyer shall bear all the shipping costs for more than half a year.

2. Free warranty service is not provided for the following user's failures caused by personal reasons:

• Faults caused by unauthorized disassembly and modification of this product.
• Faults caused by accidental fall.
• Failure caused by lack of reasonable maintenance.
• Failure to operate according to the correct instructions in this instruction manual.

11. Manufacturer

Guangzhou Xinwei Electronic Technology Co., Ltd.

User Tips

• For optimal results, ensure consistent use as per recommended therapy durations.
• Always start with the lowest intensity and gradually increase to a comfortable level.
• Keep the device and its accessories clean to maintain hygiene and performance.
• If you experience any discomfort, reduce the intensity or stop the session.
• Refer to the official PDF user manual for detailed diagrams and instructions: User Manual (PDF).

Product Video Demonstration