GIRIER BSD33

Contents

GIRIER Tuya Smart WiFi Power Plug User Manual

Model: BSD33

Introduction

Thank you for choosing the GIRIER Tuya Smart WiFi Power Plug. This smart plug allows you to control your appliances remotely, monitor power consumption, and integrate with popular voice assistants like Amazon Alexa and Google Home. Designed for convenience and safety, it features a 16A heavy load capacity with 20A surge protection and real-time power monitoring.

GIRIER Smart WiFi Power Plug with features
The GIRIER Smart WiFi Power Plug, highlighting its power monitoring, 3520W/16A/20A Surge capabilities, and compatibility with Tuya, Smart Life, Google Assistant, and Amazon Alexa.

Setup Guide

1. What's in the Box

  • GIRIER Tuya Smart WiFi Power Plug (Model BSD33)
  • User Manual (This document)
Close-up view of the GIRIER Smart WiFi Power Plug
A detailed view of the GIRIER Smart WiFi Power Plug, showing its design and power button.

2. App Installation

To control your smart plug, you need to install the Smart Life or Tuya Smart app on your smartphone or tablet.

  1. Download the Smart Life or Tuya Smart app from the Apple App Store (for iOS) or Google Play Store (for Android).
  2. Open the app and register for a new account. You will typically enter your email, receive a verification code, and then set a password.

3. Connecting the Smart Plug to Wi-Fi (Auto Scan Method)

Ensure your smartphone is connected to a 2.4GHz Wi-Fi network and has Bluetooth enabled.

  1. Plug the Smart Plug into a wall outlet.
  2. Ensure the indicator light on the plug blinks blue rapidly (twice per second). If it blinks slowly (once every 3 seconds), press and hold the power button on the Smart Plug for 6 seconds until it blinks rapidly.
  3. Open the Smart Life/Tuya Smart app, select 'Auto Scan Mode', and allow it to automatically detect the plug.
  4. Once detected, the app will prompt you to confirm the connection. Tap 'Done'.

4. Connecting the Smart Plug to Wi-Fi (Add Manually Method)

If auto-scan fails, you can add the device manually.

  1. Plug the Smart Plug into a wall outlet.
  2. Ensure the indicator light on the plug blinks blue rapidly (twice per second). If it blinks slowly (once every 3 seconds), press and hold the power button on the Smart Plug for 6 seconds until it blinks rapidly.
  3. Open the Smart Life/Tuya Smart app, select 'Add Device' (usually a '+' icon), then choose 'Electrical' > 'Socket (Wi-Fi)'.
  4. Follow the on-screen instructions, which will guide you through selecting your 2.4GHz Wi-Fi network and entering the password.
Excerpt from the user manual showing app connection steps
Visual guide from the user manual illustrating the steps for connecting the smart plug to the Wi-Fi network using both auto-scan and manual methods, along with 3rd party control setup.

5. Integrating with 3rd Party Control (Alexa/Google Home)

Once your smart plug is connected to the Smart Life/Tuya Smart app:

  1. In the Smart Life/Tuya Smart app, navigate to the profile or settings section.
  2. Look for 'Third-Party Control' or 'Voice Control' options.
  3. Select Amazon Alexa or Google Home and follow the in-app instructions to link your Smart Life/Tuya Smart account.
  4. You may need to enable the 'Smart Life' or 'Tuya Smart' skill in your Alexa or Google Home app.

Operating Instructions

1. Basic On/Off Control

You can turn the connected appliance on or off directly from the Smart Life/Tuya Smart app by tapping the plug icon. The physical power button on the plug also allows manual control.

2. Power Monitoring

The smart plug features real-time power monitoring. Access this feature in the app to view the current power consumption of the connected device, track historical data, and analyze energy usage to help save on electricity bills.

Graph showing real-time power monitoring for efficient bill saving
A visual representation of real-time power monitoring, demonstrating how tracking energy usage can lead to efficient bill savings.

3. Scheduling and Timers

Set schedules for your appliances to turn on or off automatically at specific times. Use the timer function for devices like phone chargers to prevent overcharging, or create routines for lighting and heating.

Examples of smart plug use cases
Illustrations of various smart plug applications, including controlling a floor lamp, setting timers for phone chargers, managing electric radiator schedules, and automating a pet water fountain.

4. Voice Control

Once integrated with Amazon Alexa or Google Home, you can control your smart plug using voice commands. For example, say "Alexa, turn on the living room lamp" or "Hey Google, turn off the fan."

5. Child-Lock Function

The smart plug includes a child-lock feature to prevent accidental operation. This can be enabled or disabled via the app.

6. Other Features

  • Relay Status: Configure the plug's state (on/off/last state) after a power outage.
  • Overcharge Switch: Enable protection against overcharging for connected devices.
  • Inching Timer: Set a short-duration timer for specific tasks.

Maintenance

The GIRIER Smart WiFi Power Plug requires minimal maintenance.

  • Keep the device clean and dry. Wipe with a soft, dry cloth.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or repair the device yourself, as this will void the warranty.

Troubleshooting

Common Issues and Solutions

  • Plug not connecting to Wi-Fi:
    • Ensure the smart plug is powered on and the indicator light is blinking rapidly (pairing mode).
    • Verify your smartphone is connected to a 2.4GHz Wi-Fi network (5GHz networks are not supported).
    • Check your router settings: If you have a dual-band router, ensure you are connecting to the 2.4GHz band.
    • Ensure the router's broadcasting function is enabled.
    • Set the router's encryption method to WPA2-PSK and authorization type to AES, or set both to 'auto'.
    • The wireless mode should not be exclusively 5GHz.
    • Keep the smart plug and router within a reasonable distance for a strong Wi-Fi signal.
    • Make sure your router's Wi-Fi name (SSID) is in English.
  • Device frequently disconnects:
    • Check if too many devices are connected to your router. Try disconnecting some devices to free up bandwidth.
    • Ensure your router's wireless MAC filtering function is configured to allow the smart plug. Remove the device from any filter lists if it's being blocked.
    • Verify the Wi-Fi password entered in the app is correct.
  • Voice control not working:
    • Ensure your Smart Life/Tuya Smart account is correctly linked to your Alexa or Google Home app.
    • Check that the smart plug is online and controllable via the Smart Life/Tuya Smart app.
    • Try re-discovering devices in your Alexa or Google Home app.

Specifications

ModelBSD33
Product TypeWiFi Smart Power Plug
MaterialPC+ABS, V0 Fire-Retardant
Input Voltage100-250VAC 50/60Hz
Output Voltage100-250VAC 50/60Hz
Rated Current16A
Max. Load16A, 20A Surge (3520W)
Wi-Fi StandardIEEE 802.11b/g/n (2.4GHz Only)
APP SupportTuya Smart, Smart Life
Voice ControlAmazon Alexa, Hey Google
Hub RequirementNo
GroundingStandard Grounding
Socket TypeEU Standard Power Plug (4.8mm Pin Size)
Installation TypePlug-in Type
Protection ClassIP20
CertificationRoHs, CE
Number of Slots1
IndicatorRed (On), Blue (Pairing)
Operating Temperature-20°C to 50°C

Safety Features

Diagram illustrating 4-in-1 Safety Protection
The 4-in-1 Safety Protection features of the smart plug, including Over-voltage, Over-current, Over-load, and Child-lock Protection.
  • Over-voltage Protection: Safeguards against excessive voltage.
  • Over-current Protection: Protects against current surges.
  • Over-load Protection: Prevents damage from connected devices drawing too much power.
  • Child-lock Protection: Prevents accidental operation.
  • Fire-Retardant Material: Constructed with PC+ABS V0 fire-retardant material for enhanced safety.
Internal components diagram showing 16A/20A surge capability
Internal view highlighting the robust design for 16A heavy loads and up to 20A surges, ensuring stable and safe operation.

User Tips

  • Optimize Wi-Fi Placement: For best performance, ensure your smart plug is within a good range of your 2.4GHz Wi-Fi router.
  • Leverage Power Monitoring: Regularly check the power consumption data in the app to identify energy-hungry appliances and adjust usage patterns to save electricity.
  • Create Smart Scenes: Use the app to create automated scenes, such as turning off all lights when you leave home or scheduling your coffee maker to turn on before you wake up.
  • Utilize Voice Commands: For hands-free convenience, integrate with Alexa or Google Home and practice common voice commands.
  • Check for Firmware Updates: Periodically check the Smart Life/Tuya Smart app for any available firmware updates for your smart plug to ensure optimal performance and security.

Warranty and Support

The GIRIER Smart WiFi Power Plug comes with a one-year warranty from the date of purchase. If you encounter any product problems or have suggestions, please contact the seller or manufacturer for support. Quality-related issues are covered by a replacement or full refund policy.

For a detailed user manual in PDF format, you can refer to the official document: GIRIER Smart Plug User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.