Product Overview
The IEEYEEY LED Solar Firecracker String Lights are designed for outdoor decorative lighting, powered by solar energy. They feature a flexible copper wire with numerous LED beads, available in various lengths and light colors.

Figure 1: Product overview showing available lengths (3M, 6M, 9M), LED counts (100, 200, 300), solar panel, and light color options (Warm, White, Colored).
Video 1: Product demonstration showcasing various outdoor applications and lighting modes of the solar firecracker string lights.
Setup Instructions
- Unpack and Inspect: Carefully remove all components from the packaging. Check the product to ensure it is not damaged.
- Solar Panel Placement: Choose a location for the solar panel where it will receive direct sunlight for at least 6-8 hours daily. Avoid shaded areas. Insert the ground stake into the solar panel unit and then firmly into the ground.
- Unravel String Lights: Gently uncoil the string lights, being careful not to tangle or damage the copper wire.
- Position Lights: Arrange the string lights in your desired decorative pattern around trees, bushes, railings, or other outdoor features. The flexible copper wire allows for easy shaping.
- Initial Charge: Before first use, ensure the solar panel is exposed to direct sunlight for a full day (8-12 hours) with the power switch in the 'ON' position to allow the battery to fully charge.
Figure 2: Example of solar panel placement in a sunny outdoor area.
Operating Instructions
- Power On: Locate the power switch on the back or bottom of the solar panel unit. Slide the switch to the 'ON' position.
- Automatic Operation: The lights will automatically turn on at dusk and turn off at dawn, provided the solar panel has received sufficient sunlight during the day.
- Select Lighting Mode: If your model has multiple lighting modes (e.g., steady on, flashing, fading), there will be a 'MODE' button on the solar panel. Press this button repeatedly to cycle through the available 8 lighting modes until you find your preferred setting.
- Avoid Direct Eye Exposure: Do not shine the light directly into the eyes, as this may cause damage.
Maintenance
- Cleaning: Products should be kept clean daily. Gently wipe the solar panel and LED beads with a soft, damp cloth. Do not use abrasive cleaners, hard objects, or wipe by hand roughly, as this can scratch or damage the unit.
- Solar Panel Efficiency: Ensure the solar panel remains free of dirt, dust, leaves, or snow to maintain optimal charging efficiency.
- Storage: If storing the lights for an extended period, turn the power switch to 'OFF' and store them in a cool, dry place.
- Disassembly Warning: Non-professionals are not allowed to disassemble the solar lamp to prevent damage to the circuit board or other components.
- Environmental Exposure: Do not expose the lamp to water, chemicals, or corrosive gases for a long time to avoid damage to the lamp.
Troubleshooting
- Lights Not Turning On:
- Ensure the power switch on the solar panel is in the 'ON' position.
- Verify the solar panel is receiving direct sunlight for at least 6-8 hours daily.
- Check if the solar panel is dirty; clean it if necessary.
- Ensure there is no external light source (like a street light) directly hitting the solar panel at night, which might trick it into thinking it's daytime.
- Lights Are Dim or Only Stay On for a Short Time:
- The battery may not be fully charged. Ensure the solar panel gets maximum direct sunlight.
- The solar panel might be dirty; clean it.
- Battery capacity may decrease over time. If lights remain dim after full charge, consider replacing the unit if within warranty.
- Lights Flicker or One Section is Out:
- Check for any visible damage to the copper wire or LED beads.
- Ensure connections are secure (though typically sealed).
- If a section is out, it may indicate internal damage. Do not attempt to repair if you are not a professional.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | IEEYEEY |
| Power Source | Solar Cell |
| Battery Included | Yes |
| Nominal Voltage | 3.7 V |
| Voltage | 3V |
| Luminous Flux | 60-249 Lumens |
| Installation Method | Self-contained (with ground stake) |
| Waterproof | Yes |
| Certifications | RoHs, CE |
| Item Type | Beads (LED) |
| Shape | DIY (Flexible Copper Wire) |
| Available Lengths | 3M, 6M, 9M |
| LED Count | 100 LEDs (for 3M), 200 LEDs (for 6M), 300 LEDs (for 9M) |
| Light Colors | Warm Light, White Light, Colored Light |
Figure 3: Product features highlighting copper wire, high-efficiency solar conversion, and high brightness.
User Tips
- Maximize Sunlight: Always ensure your solar panel is positioned to receive the maximum amount of direct sunlight throughout the day for optimal performance and longer illumination times at night.
- Creative Placement: The flexible copper wire allows for versatile decoration. Experiment with wrapping them around tree branches, weaving them through bushes, or outlining garden paths for unique effects.
- Regular Cleaning: A quick wipe of the solar panel every few weeks can significantly improve charging efficiency, especially in dusty or pollen-heavy environments.
- Winter Performance: In colder climates or during winter months with less daylight, the lights may not stay on as long due to reduced solar charging.
Figure 4: Various decorative applications of the string lights in outdoor settings.
Warranty and Support
For any warranty claims, technical support, or product inquiries, please contact your original seller or retailer. Keep your purchase receipt as proof of purchase.