Sofirn HS10

Contents

Sofirn HS10 Headlamp User Manual

Model: HS10

USB C Rechargeable Mini 16340 Headlamp 1100lm TN3535 90CRI Angle Flashlight TIR Optics with Magnet Tail 2 Groups

Introduction

Thank you for purchasing Sofirn products. The HS10 is a powerful mini headlamp and a versatile tool lamp. It utilizes a powerful LH351D LED to provide a nice beam for working, running, hiking, and more. Powered by one 16340 battery and featuring a simple but elaborated user interface, the HS10 is your reliable partner for everyday use.

Sofirn HS10 headlamp with accessories
Sofirn HS10 headlamp with included accessories.

Safety Instructions

  • HS10 is a powerful headlamp. Never point the beam directly at a person, animal, or moving vehicle. Doing so could cause retinal damage.
  • Please do not allow children to play with it. Strobe mode may cause seizures in persons with photosensitive epilepsy.
  • Operating the headlamp for a long time in Turbo or High mode will warm it up. This is normal.
  • HS10 is intended to be used with a premium 16340 rechargeable battery.
  • When installing the battery, make sure the anode (+) side always faces towards the head/LED.
  • Unscrew the tailcap half a turn to avoid unwanted activation during transport. It also prevents the battery from draining while the headlamp is in standby.
  • Avoid hitting or dropping the headlamp.

Specifications

Feature Detail
Emitter1x Samsung LH351D LED with a lifespan of up to 50,000 hours
Battery Options1x 16340 Li-Ion battery (rechargeable) or 1x CR123A battery
Operating Voltage3.0V - 4.2V (16340 battery)
Dimensions67.2mm (length) × 22.5mm (head diameter)
Weight37 grams (without battery)
Headlamp BodyAerospace grade 6061 aluminum alloy, CNC manufactured to hard-anodized to military grade specification type III, anti-abrasive finish, anti-crash geometry, good heat exchange.
LensFresnel Lenses - scratch and wear resistant
Automatic StepdownTurbo mode steps down to High mode automatically to prevent overheating.
Water ResistanceIPX-8 (up to 2 meters under water, not for diving)
Charging SpecificationUSB-C port, input DC 5V 1A
Impact Resistance1m / 3.28 ft.
ANSI/NEMA FL1 Chart for Sofirn HS10
ANSI/NEMA FL1 Chart: Luminous Flux, Runtime, Beam Distance, and Peak Intensity for various modes.

Note: The above parameters are based on tests according to international flashlight testing standards (ANSI/NEMA FL1) using one 800mAh 16340 Li-ion battery in our laboratory. Results may vary with different battery or under different environmental conditions. Operation temperature is 0°C - 40°C.

Setup

Battery Installation

  1. Unscrew the tailcap of the headlamp.
  2. Insert one 16340 battery with the anode side (+) facing towards the head/LED.
  3. Screw the tailcap back on tightly.
Battery installation diagram for Sofirn HS10
Ensure correct battery orientation during installation.

Headband Installation

The Sofirn HS10 can be used as a headlamp by attaching it to the included headband. Follow these steps:

Step-by-step guide to install the headband on Sofirn HS10
Visual guide for headband assembly.

The headlamp can also be removed from the headband and used as a right-angle EDC flashlight. A pocket clip is included for this purpose.

Sofirn HS10 usage scenarios: magnetic tailcap, clip, handheld, headband
The versatile design allows for magnetic attachment, clipping, handheld use, or wearing as a headlamp.

Operating Instructions

From OFF

  1. ON/OFF: Single click to turn ON, single click again to turn OFF.
  2. Moonlight Mode: Press and hold to turn on Moon. Then press and hold again to cycle through stepped modes.
  3. Turbo Mode: Double click to activate Turbo. Double click again to activate Moon, single click to turn OFF, press and hold to cycle through stepped modes.
  4. Special Modes (Strobe/SOS/Beacon): Triple click to activate Strobe, double click again to cycle through Strobe-SOS-Beacon, then single click to turn OFF.
  5. Lockout: Four fast clicks to activate lockout. Four fast clicks again to deactivate lockout and return to the previous mode setting. When the light is locked, the main LED blinks two times to show the status of being locked. While in lockout, press and hold the button to activate Moon.

From ON

  1. OFF: Single click to turn OFF (except from Turbo and Strobe modes).
  2. Stepless Brightness Adjustment: Press and hold to change brightness steplessly. Release the button to stop at the current light mode.
  3. Turbo Mode: Double click to activate Turbo. Single click to return to the previous mode, press and hold to cycle through modes (Moon - Low - Medium - High).
  4. Special Modes (Strobe/SOS/Beacon): Triple click to activate Strobe, double click again to cycle through Strobe-SOS-Beacon, single click to return to the previous mode.
  5. Toggle Stepped/Ramping Mode: Four fast clicks to toggle between stepped mode and ramping mode. The light flashes twice when it changes mode.
Sofirn HS10 stepped and stepless modes diagram
Diagram illustrating the stepped and stepless brightness modes.

Power Indicator

The LED indicator shows the power status for 5 seconds after turning HS10 on:

  • Green: Remaining battery power is good.
  • Red: Remaining battery power is poor.
  • Flashing Red: Critical power, replace or recharge the battery as soon as possible.
Sofirn HS10 with USB-C charging port and indicator lights
USB-C charging port and battery indicator lights.

Maintenance

  • Disassembling the sealed head can damage the headlamp and voids the warranty.
  • Sofirn Ltd. recommends using high-quality brand batteries. Damage by battery leakage voids the warranty.
  • Remove the battery if the headlamp will not be used for an extended period of time.
  • To prevent self-discharge or accidental activation during storage or transportation, unscrew the tailcap by half a turn or remove the battery.
  • Every 6 months, threads should be wiped with a clean cloth followed by a thin layer of silicone grease.
  • To maintain a proper level of waterproofness, replace worn-out O-rings with an approved spare.
Sofirn HS10 demonstrating IPX8 waterproof rating
The HS10 features IPX8 water resistance, but proper maintenance is key.

Troubleshooting

Clean battery contacts regularly as dirty contacts may impair the performance of the headlamp. If you experience problems (flicker, intermittent light, or failure to turn on) the following root causes and solutions should be tried:

  • Reason A: The battery needs a replacement.
    • Solution: Replace the battery with an approved type of a fully charged battery. (Headlamp shuts off when voltage is lower than 2.8V).
  • Reason B: Threads, PCB board contact or other contacts are dirty.
    • Solution: Please clean the contact points with a cotton swab soaked in rubbing alcohol.
  • Reason C: The headlamp will not turn on upon first use.
    • Solution: Please do not forget to remove the insulation sticker from the battery on first use.

User Tips

  • The magnetic tailcap is very useful for hands-free work, allowing you to attach the headlamp to metal surfaces.
  • The HS10 is lightweight and compact, making it great for small jobs around the house or carrying in a pocket.
  • Enjoy the high CRI and smooth beam for clear visibility.
  • The light is very bright for its form factor and offers both stepped and ramping modes for versatile brightness control.
  • USB-C charging is convenient and quick, fully charging the 800mAh 16340 battery in about 1.5 hours.
  • While the headband is comfortable, it may wrinkle or stretch over time with frequent use.

Warranty & Support

If the above methods do not work, please refer to the warranty policy before contacting your authorized distributor.

Sofirn Limited:

  • Tel: +86-755-23440047
  • Fax: +86-755-23440141
  • Email (Amazon orders): us@sofirnlight.com
  • Email (Website orders): sofirnlight@gmail.com

Manufacturer: Shenzhenshi Jinba Technology Co., Ltd

Address: 1/F to 9/F, 1st Building, NO.110 Tenglong Industrial Center, Guanlan Street, Longhua New District, Shenzhen 518000, China

Product Demonstration Video

Video demonstrating the Sofirn HS10 headlamp's features, including unboxing, waterproof test, magnetic tailcap, and various light modes in a dark environment.

© Sofirn Limited. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.