recordio GAX-KC 8/12/16

Contents

GAX-KC 8/12/16 Professional Mixer User Manual

Model: GAX-KC 8/12/16 | Brand: recordio

1. Introduction

Thank you for choosing the recordio GAX-KC Professional Mixer. This manual provides essential information for the safe and efficient operation of your new audio mixer. The GAX-KC series offers professional-grade audio mixing with features such as 99 built-in DSP reverb effects, USB compatibility for recording and playback, and Bluetooth connectivity for wireless audio streaming. It is designed for various applications including meetings, stage performances, live streams, and other audio events.

Overall view of the GAX-KC Professional Mixer
Figure 1: Overall view of the GAX-KC Professional Mixer.
Video 1: Product demonstration showcasing the mixer's features and controls.

2. Safety Information

WARNING: RISK OF ELECTRIC SHOCK! DO NOT OPEN!

  • Always connect the mixer to a grounded power outlet.
  • Do not expose this appliance to rain or moisture.
  • Do not remove the cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.
  • Replace fuses only with the same type and rating.
  • Ensure proper ventilation around the unit.
  • Avoid placing the unit near heat sources or in direct sunlight.

3. Product Overview

The GAX-KC mixer is equipped with multiple input channels, a comprehensive equalization section, 99 DSP effects, and versatile connectivity options including USB and Bluetooth. It features a user-friendly interface with clear labeling and robust faders for precise control over your audio. The mixer is compatible with a wide range of audio devices, making it suitable for various professional and amateur setups.

Diagram showing various compatible audio devices with the mixer
Figure 2: Powerful compatibility with wired microphones, electronic keyboards, guitars, laptops, power amplifiers, and wireless microphones.

4. Setup Instructions

4.1 Power Connection

  1. Ensure the mixer's POWER switch (located on the back panel) is in the OFF position.
  2. Connect the provided AC power cable to the AC power input port on the back panel of the mixer.
  3. Plug the other end of the power cable into a suitable AC 90V-240V power outlet.
  4. Once all audio connections are made, switch the POWER switch to the ON position.
Detailed analysis of the mixer controls including phantom power and faders
Figure 3: Detailed view of mixer controls, including MIC/LINE IN with +48V Phantom Power indicators and 100mm travel faders.

4.2 Audio Connections

Refer to the diagram on page 1 of the full user manual PDF for a visual representation of the input/output layout. The PDF manual can be accessed at: User manual (PDF).

Input Connections:

  • MIC/LINE IN (Channels 1-4, etc.): These mono input ports support both XLR and 1/4" PHONE plugs. Connect microphones, musical instruments, or other audio equipment here.
  • +48V Phantom Power: For condenser microphones, activate the +48V PHANTOM switch. The LED will light up to indicate it's active.
  • LINE IN (Stereo Channels 5/6, 7/8 MP3): Connect stereo audio sources. If only the L (MONO) socket is used, the mixer will duplicate the signal to both L and R channels.
  • USB Jack: Connect a USB drive for MP3 playback or a computer for USB audio interface functionality (2IN & 2OUT, 44.1-48K 16/24BIT).
  • PC/Computer Connector: For connecting to a computer as an audio interface.

Output Connections:

  • MAIN OUTPUTS (L/R): Connect active speakers or amplifiers using XLR or 1/4" PHONE plugs.
  • GROUP 1-2 Output Jack: Provides a sub-mix output.
  • PHONES: Connect headphones for monitoring.
  • AUX SEND: For sending signals to external effects processors or monitor mixes.

5. Operating Instructions

5.1 Channel Controls

Each input channel features a set of controls for precise audio shaping:

  • GAIN Knob: Adjusts the input sensitivity to achieve the best balance between signal-to-noise ratio (SNR) and dynamic range.
  • PAD Switch: Attenuates the input signal by -20dB, useful for high-level signals to prevent clipping.
  • EQ (Equalization):
    • HI (12kHz): Controls the high-frequency tone.
    • FREQ + MID (2.5kHz): Adjusts the mid-frequency tone. This is a 'bell' shaped peak/dip response that cuts or boosts higher mid frequencies by up to 15dB. The center frequency can be swept from 240Hz to 6KHz.
    • LOW (80Hz): Controls the low-frequency tone.
  • AUX Knob: Adjusts the amount of channel signal sent to the AUX output.
  • FX Knob: Controls the amount of channel signal sent to the internal effect device.
  • PAN Knob: Adjusts the stereo position of the channel signal (left to right).
  • MUTE Switch: Mutes all signals from the channel. A red LED indicates the channel is muted.
  • SOLO Button: Allows monitoring of the channel's signal status through headphones.
  • SUB Button: Routes the channel signal to the GROUP 1-2 output.
  • MAIN Button: Routes the channel signal to the main L/R output.
  • Channel Volume Fader: Adjusts the output level of the individual channel.

5.2 DSP Effects (99 Built-in)

The mixer includes 99 digital signal processing (DSP) effects to enhance your audio. The display shows the selected effect number and type.

Close-up of the mixer's display showing 99 DSP effects and MP3 player controls
Figure 4: Display showing 99 DSP effects and MP3 Player interface.

Effect List:

  • 1-10: WARM HALL
  • 11-20: BRI HALL
  • 21-30: PLATE
  • 31-40: ROOM
  • 41-50: CHURCH
  • 51-60: P-P DELAY
  • 61-70: DELAY
  • 71-80: MOD DELAY
  • 81-83: ECHO
  • 84-86: CHORUS
  • 87-89: FLANGE
  • 90-94: PITCH
  • 95-99: MULTI FX

Use the PROGRAM (PUSH) knob to select an effect and the REPEAT and PROGRAM knobs to adjust effect parameters.

5.3 USB & Bluetooth Functionality

The mixer supports both USB and Bluetooth for versatile audio playback and recording.

  • USB Compatibility: Connect a USB flash drive to the USB port for MP3 audio playback. The mixer also functions as a 2-input, 2-output USB audio interface (44.1-48K 16/24BIT) when connected to a computer.
  • Wireless BT Connection: Pair your Bluetooth-enabled mobile phone, tablet, or computer to the mixer for wireless audio streaming.
Diagram showing USB compatibility for the mixer
Figure 5: USB compatibility for 2IN & 2OUT audio interface and USB drive playback.
Diagram showing wireless Bluetooth connection for the mixer
Figure 6: Wireless Bluetooth connection for mobile devices and computers.

5.4 Graphic Equalizer

The mixer features a single nine-segment graphic equalizer. This allows you to fine-tune the overall frequency response of the left and right main output channels to match your acoustic environment or desired sound profile.

5.5 Main Output Controls

  • Main Output Fader (L/R): This is the master fader for adjusting the overall left and right output volume.
  • Output Marshalling 1-2 Volume: Controls the output volume of the G1-2 group.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the mixer's surface. Avoid using abrasive cleaners or solvents.
  • Storage: Store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Always handle the mixer with care. Avoid dropping or subjecting it to strong impacts.
  • Ventilation: Ensure that the ventilation slots are not blocked to prevent overheating.

7. Troubleshooting

  • No Sound Output: Check all cable connections, ensure the mixer is powered on, and verify that all relevant channel faders, main faders, and gain knobs are set appropriately. Check mute and solo buttons.
  • Distorted Sound: Reduce input GAIN levels or activate the PAD switch for high-level signals. Check for proper impedance matching.
  • No Bluetooth Connection: Ensure Bluetooth is enabled on your device and the mixer. Try restarting both devices and re-pairing.
  • USB Playback Issues: Ensure the USB drive is properly formatted and contains compatible audio files (e.g., MP3).

8. Specifications

Feature Specification
Type Mixers
Model Number GAX-KC 8/12/16
Brand Name recordio
Origin Mainland China
DSP Effects 99 Built-in (Reverb, Delay, Chorus, Flange, Pitch, Multi FX)
USB Audio Interface 2IN & 2OUT, 44.1-48K 16/24BIT
Bluetooth Wireless BT Connection
Phantom Power +48V
Power Supply AC 90V-240V
Package Length 64 cm
Package Width 22 cm
Package Height 54 cm
Package Weight 7.5 kg

9. User Tips

  • Before any live performance or recording session, always perform a sound check to ensure all channels and effects are working as expected.
  • Start with all faders at their lowest position and gradually increase levels to avoid sudden loud noises.
  • Experiment with the 99 DSP effects to find the perfect sound for your vocals or instruments.
  • For detailed wiring and signal flow, refer to the Block Diagram available in the full PDF user manual.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.