1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANYFAR Wireless CarPlay Android Auto Decoder. This device integrates Apple CarPlay and Android Auto functionalities into your vehicle's existing infotainment system without replacing the original screen.

Figure 1.1: ANYFAR Wireless CarPlay Android Auto Decoder and in-car display.
2. Compatibility
This decoder is designed for specific Land Rover and Jaguar models equipped with a Bosch host system and an 8-inch screen. Please verify your vehicle's compatibility before installation.
2.1 Host System Identification
The system is compatible with Bosch hosts where the time is displayed on the right side of the screen. It is NOT compatible with Harman hosts where the time is displayed in the middle.

Figure 2.1: Visual guide for identifying compatible Bosch host systems. Bosch style displays time on the right, Harman style displays time in the middle. The screen should measure 8 inches diagonally. Bosch 8" is displayed on the rear of the OEM monitor.

Figure 2.2: Compatibility overview showing Bosch host (time on right) as compatible, and Harman host (time in middle) as incompatible.
2.2 Compatible Vehicle Models

Figure 2.3: Compatible Model List.
| Brand | Car Model | Years | Screen Size |
|---|---|---|---|
| Land Rover | Range Rover Evoque | 2012-2016 | 8 inch |
| Range Rover | 2013-2016 | ||
| Discovery 4 | 2012-2016 | ||
| Discovery Sport | 2013-2016 | ||
| Freelander 2 | 2011-2014 | ||
| Jaguar | XE/XF | 2012-2014 | |
| XJL | 2012-2015 | ||
| F-TYPE | 2013-2016 |
3. Features
The ANYFAR Wireless CarPlay Smart Module offers a range of features to enhance your driving experience:
- Wireless & Wired CarPlay: Seamless integration with Apple CarPlay for navigation, music, calls, and more.
- Wireless & Wired Android Auto: Connect your Android device for a familiar interface on your car's screen.
- Bluetooth Connectivity: For audio streaming and hands-free calling.
- Voice Control: Utilize Siri or Google Assistant for safe, hands-free operation.
- Live Map & Online Entertainment: Access your favorite navigation apps and streaming services.
- Factory Protocol Support: Maintains original car functions and controls.
- Lossless Installation: Designed for integration without permanent modifications to your vehicle's wiring.
- Retains OEM System: Easily switch between the factory car system and the CarPlay/Android Auto system.

Figure 3.1: Overview of key features including Bluetooth, CarPlay, Android Auto, Factory Protocol, Lossless Installation, Voice Control, Live Map, and Online Entertainment.
4. Setup and Installation
Installation involves connecting the decoder module to your car's existing wiring and display. Professional installation is recommended.
4.1 Wiring Diagrams
Ensure you identify whether your vehicle has a resistive or capacitive screen to use the correct wiring diagram.
4.1.1 Resistive Screen Connection
For vehicles with a resistive screen, connect the ANYFAR module as follows (refer to the full PDF manual for a detailed diagram):
- Connect the module's Power, LVDS OUT, and CAMERA/USB ports.
- Connect to the factory touch screen FPC.
- Connect to the factory video FPC.
- Connect to the factory power harness.
Refer to the User Manual PDF (Section 3.1) for the detailed Resistive Screen Connection Diagram.
4.1.2 Capacitive Screen Connection
For vehicles with a capacitive screen, connect the ANYFAR module as follows (refer to the full PDF manual for a detailed diagram):
- Connect the module's Power, LVDS OUT, and CAMERA/USB ports.
- Connect to the factory video FPC.
- Connect to the factory power harness.
Refer to the User Manual PDF (Section 3.2) for the detailed Capacitive Screen Connection Diagram.
4.2 DIP Switch Settings
After physical installation, configure the DIP switches on the decoder according to your specific car model and screen type (capacitive or resistive). Refer to the table below.
| Car Model | Year | Capacitive Touch Screen DIP | Resistive Touch Screen DIP |
|---|---|---|---|
| Range Rover Evoque | 2012-2016 | 1456/17ON | 13467/13567ON |
| Range Rover | 2012-2016 | 1456 ON | 13467 ON |
| 7 ON | 3567 ON | ||
| 23456 ON, 17 ON, 3456 ON | 2567 ON, 13567 ON, 567 ON | ||
| Range Rover Dual display | 2013-2016 | 123456 ON | 12567 ON |
| Discovery 4/Discovery Sport | 2012-2016 | 7 ON | 3567 ON |
| Freelander 2 | 2013-2015 | 27 ON | 23567 ON |
| XE/XF | 2012-2014 | 13456 ON | 1567 ON |
| XJL | 2012-2015 | 12456 ON | 123467 ON |
| F-TYPE/2016XI | 2013-2016 | 2456 ON | 23467 ON |
Note: Ensure the dial is set to "ON". After changing DIP settings, reboot the system for changes to take effect.
5. Operating Instructions
5.1 Switching Between Systems
To switch from the factory OEM car system to the CarPlay/Android Auto system, long-press the "back" or "return" button on your car's knob or console. To switch back, use the same method or the NAV button as described below.

Figure 5.1: Switching between OEM Car System and Apple CarPlay/Android Auto by long-pressing the back button.
5.2 Button Controls
5.2.1 Steering Wheel Button Control
| Button Icon | Operation | Function |
|---|---|---|
| 📞 | Short press | Answer the phone |
| ▶️ | Short press | Next song |
| ◀️ | Short press | Previous song |
| ➕ | Short press | Increase the volume |
| ➖ | Short press | Decrease the volume |
5.2.2 Console Button Control
| Button | Operation | Function |
|---|---|---|
| NAV | Long press | Switch OEM screen to interface screen OR interface screen to OEM screen |
| Hazard Light Button (Triangle) | Double Click | Switch OEM screen to interface screen OR interface screen |
| Touch screen | Touch screen | Control function |
5.3 Wireless Connection (CarPlay & Android Auto)
For optimal audio and video performance, ensure your vehicle's audio system is set to Bluetooth music mode before connecting wirelessly.

Figure 5.2: Wireless CarPlay in operation, displaying navigation, music, and call interfaces.
The wireless connection process involves pairing your smartphone via Bluetooth to the upgrade kit, which then integrates with your car's factory Bluetooth system.
Refer to the User Manual PDF (Section 5) for detailed diagrams of the wireless connection setup.
5.3.1 Wireless CarPlay Connection Steps
- Turn on your iPhone's Bluetooth and Wi-Fi.
- On your iPhone, go to Bluetooth settings and select the device name "CAR Audio_XXXX" (where XXXX is a unique identifier).
- Confirm the pairing request on your iPhone.
- When prompted, select "Use CarPlay".
- Ensure the audio source on your iPhone is set to the original car radio (e.g., "Land Rover" or your car's Bluetooth name).
Refer to the User Manual PDF (Section 5.1) for screenshots of the Wireless CarPlay connection process.
5.3.2 Wireless Android Auto Connection Steps
- Turn on your Android phone's Bluetooth and Wi-Fi.
- On your Android phone, go to Bluetooth settings and select the device name "CAR Audio_XXXX".
- Confirm the pairing request.
- After successful Bluetooth pairing, follow the on-screen prompts on your phone and car display to complete the Android Auto connection.
- If prompted, connect Android Bluetooth or insert a USB cable.
Refer to the User Manual PDF (Section 5.2) for screenshots of the Wireless Android Auto connection process.
5.4 External Settings
5.4.1 Rear View Camera Input
This CarPlay interface supports aftermarket rear view cameras for clear imagery. Connect your camera to the designated inputs on the upgrade kit.
Refer to the User Manual PDF (Section 6.1) for the detailed Rear View Camera Input wiring diagram.
To enable the rear view function:
- Enter system settings: Click "Factory mode" > "Advanced mode".
- Enter password "888888".
- Go to "MCUsetup" and uncheck the "AO" option.
- Return to the previous level and click "Restart system" to apply changes.
5.4.2 Radar and Trajectory Settings
If your aftermarket camera supports reversing trajectory lines or radar, you can enable these features:
- Reversing Trajectory Line: Uncheck the A1 box in the MCU Setup to display the reversing trajectory line.
- Aftermarket Radar: Uncheck the A2 box in the MCU Setup to use the aftermarket radar option.
The front camera input settings are similar.
Refer to the User Manual PDF (Section 6.2) for screenshots of the MCU Setup screen for radar and trajectory settings.
5.4.3 AUX Output
If your car does not have Bluetooth functionality, you can use the AUX sound output.
- Connect the AUX cable from the decoder to your car's AUX input.
- Select AUX in your car's NTG system.
- In the decoder's settings, navigate to:
Settings > Factory Settings > Phone link Settings. - Disable "phonelink Audio (ON)".
- Go back and save the settings. A system reboot is necessary for changes to take effect.
Refer to the User Manual PDF (Section 6.3) for the AUX output connection diagram and settings menu.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | ANYFAR |
| Origin | Mainland China |
| Compatibility | Land Rover/Jaguar with Bosch Host, 8-inch screen (specific models/years listed in Section 2) |
| Functions | Wireless/Wired CarPlay, Wireless/Wired Android Auto, Bluetooth, Voice Control, Rear Camera Input, AUX Output |
| Package Length | 27 cm |
| Package Width | 18 cm |
| Package Height | 11 cm |
| Package Weight | 0.78 kg |
7. Maintenance
The ANYFAR Wireless CarPlay Android Auto Decoder is designed for minimal maintenance. Keep the unit free from dust and moisture. Do not attempt to open the casing, as this may void any warranty and could damage the device.
- Cleaning: Use a soft, dry cloth to clean the exterior of the module. Do not use liquid cleaners or solvents.
- Software Updates: Periodically check with the manufacturer or seller for any available firmware updates to ensure optimal performance and compatibility.
8. Troubleshooting
If you encounter issues with your ANYFAR Wireless CarPlay Android Auto Decoder, try the following troubleshooting steps:
- No Display/Black Screen:
- Check all cable connections to ensure they are secure.
- Verify DIP switch settings are correct for your vehicle model and screen type.
- Ensure the car's ignition is on and the system is powered.
- No Audio:
- Ensure your car's audio input is set to the correct source (Bluetooth or AUX).
- Check phone volume and car stereo volume levels.
- If using AUX, ensure "phonelink Audio (ON)" is disabled in settings and the system has been rebooted.
- Wireless Connection Issues:
- Ensure Bluetooth and Wi-Fi are enabled on your phone.
- Forget the device from your phone's Bluetooth settings and try pairing again.
- Restart your phone and the car's infotainment system.
- CarPlay/Android Auto Not Launching:
- Ensure your phone is compatible with CarPlay/Android Auto.
- Try a different USB cable if attempting a wired connection.
- Verify the correct button is being long-pressed to switch to the interface.
- Rear Camera Not Displaying:
- Check camera wiring connections.
- Ensure the "AO" option is unchecked in MCUsetup and the system has been restarted.
If problems persist, consult the full user manual PDF or contact customer support.
9. User Tips
- Initial Setup: Take your time during installation and double-check all connections and DIP switch settings before powering on.
- Audio Quality: For the best audio experience, ensure your phone's audio output is routed correctly through Bluetooth or AUX, and adjust equalizer settings on your phone or car stereo as desired.
- Firmware Updates: Keep an eye out for any firmware updates from ANYFAR, as these can improve performance, add features, or fix bugs.
10. Support and Further Information
For more detailed instructions, wiring diagrams, or troubleshooting, please refer to the official user manual PDF:
If you require further assistance, please contact ANYFAR customer support.