1. Introduction
This manual provides detailed instructions for the installation and operation of your ANYFAR CarPlay and Android Auto USB Adapter Hub. This retrofit kit is designed to upgrade your Mazda's infotainment system, enabling seamless integration with Apple CarPlay and Android Auto functionalities. Enjoy features like voice control, navigation, messaging, and audio applications directly through your car's display.
2. Compatibility
This USB Adapter Hub is compatible with Mazda vehicles equipped with the Mazda Connect & MZD Connect System. Please verify your vehicle's model and year against the list below:
| Model | Compatible Years |
|---|---|
| Mazda MX-5 | 2016-2020 |
| Mazda CX-5 | 2015-2020 |
| Mazda 2 | 2016-2019 |
| Mazda 6 | 2016-2020 |
| Mazda CX-8 | 2016-2019 |
| Mazda CX-3 | 2016-2019 |
| Mazda CX-9 | 2016-2020 |
| Mazda 3 | 2014-2018 |
| FIAT 124 | 2017-2021 |
3. Package Contents
Please check the package for the following items:
- 1x USB HUB Unit (Main Adapter)
- 2x USB Cables
- 2x Sponge Tape (100 x 30 mm)
- 1x Product Manual (this document, and a physical copy may be included)
- 10x Tie Wraps
4. Installation Guide
Follow these steps for proper installation of the USB Adapter Hub. Professional installation is recommended if you are not familiar with automotive electronics.
- Prepare the Vehicle: Ensure the vehicle's ignition is off and the battery is disconnected before starting the installation.
- Locate Existing USB HUB Unit: Identify and access the location of your vehicle's existing USB HUB unit. This typically involves removing trim panels.
- Remove Old Components: Disconnect and remove the old USB HUB unit and its associated gray USB cable from the CMU (Car Multimedia Unit).
- Install New USB HUB Unit: Connect the new ANYFAR USB HUB unit. Plug in the brown and black USB cables provided into the appropriate ports on the new HUB unit and connect them to the CMU.
- Secure Connections: To prevent noise and ensure a stable connection, wrap any disconnected automobile cable harness connectors with the provided sponge tape (100 x 30 mm). This procedure applies to both single and dual automotive wiring harness connectors.
- Reassemble: Carefully reassemble any removed trim panels.
- Reconnect Battery: Reconnect the vehicle's battery and test the functionality.
5. Operating Instructions
Once installed, the ANYFAR USB Adapter Hub allows you to use CarPlay and Android Auto seamlessly.
5.1 Connecting Your Smartphone
To activate CarPlay or Android Auto, simply connect your compatible smartphone to the new USB port on the adapter hub using a high-quality USB cable. The system should automatically detect your phone and launch the respective interface on your car's display.
5.2 Key Features and Controls
- Voice Control: Utilize Siri (for CarPlay) or Google Assistant (for Android Auto) by pressing the voice command button on your steering wheel or saying the wake word. This allows for hands-free control of navigation, calls, messages, and music.
- Original Car Controls: The system integrates with your vehicle's existing controls, including the original car mouse knob, steering wheel controls, and displays from the original camera and parking sensors.
- Applications: Access a wide range of compatible applications for navigation (e.g., Google Maps, Waze), music (e.g., Spotify, YouTube Music), messaging (e.g., WhatsApp, LINE), and more.
6. Maintenance
The ANYFAR USB Adapter Hub requires minimal maintenance. Keep the unit and its connections clean and free from dust and moisture. Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods. Ensure all cables are securely connected to prevent intermittent issues.
7. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
- Slow Charging: Ensure you are using a high-quality USB cable. Some cables may not support fast charging.
- Slow Connection: Check the USB cable for damage. Try a different USB port if available, or restart your smartphone and the car's infotainment system.
- Map Card Not Recognized: This upgraded unit is designed to identify the original vehicle map card. If issues persist, ensure the map card is properly inserted and consult your vehicle's manual or a Mazda service center.
- No CarPlay/Android Auto Connection:
- Verify your smartphone is compatible with CarPlay/Android Auto.
- Ensure your phone's operating system is up to date.
- Check that CarPlay/Android Auto is enabled in your phone's settings.
- Try a different USB cable.
- Restart your phone and the car's infotainment system.
8. Specifications
| Feature | Detail |
|---|---|
| Model | TK78669U0C |
| Brand | ANYFAR |
| Compatibility | Mazda Connect & MZD Connect System (specific models/years listed in Section 2) |
| Connectivity | Wired CarPlay, Wired Android Auto, USB, AUX |
| Key Features | Fast charging, Fast connection, Identifies original vehicle map card, Supports wireless Box connection (optional) |
| Unit Dimensions (approx.) | Width: 3.4 inches (8.6 cm), Height: 1.5 inches (3.8 cm), Depth: 2.6 inches (6.6 cm) |
| Package Dimensions (approx.) | Length: 27 cm, Width: 18 cm, Height: 11 cm |
| Package Weight (approx.) | 0.38 kg |
9. User Tips
- Always use certified USB cables for optimal performance and charging speed.
- Keep your smartphone's operating system updated to ensure compatibility with the latest CarPlay and Android Auto features.
- If you experience any connectivity issues, try restarting both your phone and the car's infotainment system.
- For the best experience, ensure your car's firmware is also up to date.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty information, please contact the ANYFAR Car Electronics Store directly. Refer to the official product page or your purchase documentation for contact details.
A detailed user manual in PDF format is also available for download: Download User Manual (PDF)