WANGLU IPC-9800ADHS Pro

Contents

WANGLU IPC-9800ADHS Pro Multi-functional CCTV Tester User Manual

Model: IPC-9800ADHS Pro

1. Introduction

The WANGLU IPC-9800ADHS Pro is a 7-inch IPS touch screen all-in-one CCTV tester designed for the maintenance and installation of IP, analog, and HD coaxial cameras, as well as other security equipment. It features a 1280x800 resolution display, supporting 8K H.265 video, 8MP CVI/TVI/AHD/EX-SDI, HD-SDI, and 3G-SDI camera tests. This versatile tool integrates various functions including cable testing, digital multi-meter, PoE++ power output, and SFP optical module testing, making it an essential device for CCTV installers.

2. Package Contents

Carefully unpack the box and ensure all items listed below are present and in good condition. If any items are missing or damaged, please contact your vendor.

Video Description: Unboxing video for the IPC-9800 Pro series CCTV Tester, demonstrating the contents and initial setup.

  • IPC-9800ADHS Pro Tester Unit
  • Network Cable Tester (Cable Tracer)
  • Power Adapter (DC15V 1.6A)
  • 8GB SD Card
  • Lithium-ion Battery (11.1V DC 5200mAh - typically pre-installed)
  • Tool Bag
  • DC Power Output Cable
  • BNC Cable
  • RS485 Control Cable
  • Audio Test Cable
  • Safety Cords (x3)
  • SC, ST Connector (for optical power meter models)
  • Multi-meter Test Leads (one pair red and black)
  • TDR Alligator Clip
  • Screwdriver
  • User Manual (this document)

3. Setup and Initial Use

3.1 Charging the Battery

Before first use, fully charge the tester's built-in 11.1V / 5200mAh Lithium-ion battery. Connect the provided power adapter to the tester and a power outlet. A full charge takes approximately 3.5 hours and provides up to 11 hours of working time.

3.2 Powering On/Off

Press and hold the power button (usually located on the top right side of the device) until the screen illuminates to power on. To power off, press and hold the power button again until the shutdown prompt appears, then confirm.

3.3 Interface Overview

Main screen of the IPC-9800ADHS Pro Multifunction Tester

Image Description: The main screen of the IPC-9800ADHS Pro, showing icons for various functions like IP Camera Test, CVBS & HD Camera, Cable Tester, Media Player, Tools, My APPS, Manual, Update, File Explorer, Settings, and NET TOOL.

The main interface provides quick access to all primary functions via touch icons. Navigate by tapping the desired application icon.

4. Operating Instructions

4.1 Camera Testing

4.1.1 IP Camera Test

  • Tap 'IP Camera Test' on the main screen.
  • Supports Rapid ONVIF, auto login, and display image.
  • Includes dedicated test tools for Hikvision and Dahua cameras.
  • Tests 8K H.265 video display via mainstream.
  • Supports AXIS, Hikvision camera test, entering ONVIF app, input username and password.

4.1.2 HD Coaxial Camera Test

HD Coaxial 4.0 Test diagram

Image Description: Diagram illustrating connections for HD Coaxial 4.0 Test, showing SDI, CVI, TVI, AHD cameras connected to the tester. Features include 4K Full HD, Coaxial PTZ control, OSD menu, snapshot, video record, and 4x zoom.

  • Connect the coaxial camera to the 'AHD CVI TVI CVBS IN' or 'HD-SDI IN' port.
  • Supports 8MP TVI/AHD/CVI/EX-SDI, HD-SDI, and 3G-SDI camera tests.
  • Features snapshot, video record and playback, zoom, and camera OSD menu control over coaxial cable.

4.1.3 Analog (CVBS) Camera Test

  • Connect the analog camera to the 'AHD CVI TVI CVBS IN' port.
  • Supports CVBS camera test and PTZ control.
  • Includes video level meter, peak video signal level, SYNC signal level, and color bar chroma level measurement.

4.1.4 HDMI/VGA Input/Output

  • HDMI Input: Supports 4K 30FPS. Connect an HDMI source to the 'HDMI IN' port.
  • HDMI Output: Supports 4K 60FPS. Connect an HDMI display to the 'HDMI OUT' port.
  • VGA Input: Supports 1920x1080P. Connect a VGA source to the 'VGA IN' port.

4.1.5 Power Over Ethernet (PoE++) Output

CCTV Tester with PoE++ 90W output

Image Description: The tester connected to a CCTV camera, demonstrating PoE++ 90W output. The screen shows PoE output details (55V, 18.7W) and highlights timer-based and overload protection for high-power output.

Power Management V2.0 interface

Image Description: The Power Management V2.0 screen, showing real-time monitoring of supply voltage and power for PoE++, 24V, and 12V/3A outputs, including input voltage and power for PoE and DC 15V charger. Diagrams illustrate connections for various camera types and power sources.

  • The tester can provide up to 55V PoE++ power output, with a maximum power of 90W.
  • Connect a PoE-powered device (e.g., IP camera) to the LAN port.
  • The tester also provides DC24V 2A, DC12V 3A, and DC5V 2A power outputs for non-PoE cameras.

4.2 Cable Testing

  • Tap 'Cable Tester' on the main screen.
  • UTP/RJ45 Cable Test: Tests order and connectivity, RJ45 cable TDR test for pair status, length, attenuation, reflectivity, impedance, and skew.
  • BNC Cable Test: TDR test for length and short circuit. Measures transmission attenuation value and quality.
  • Digital Cable Tracer: Helps search BNC, network, and telephone cables from a bundle.
  • Cable Length Measurement: Tests length for BNC, network, telephone, RVV, elevator, and Cat 5/6 cables. Max measurement for open circuits is 1.5KM.

4.3 SFP Optical Module Port

SFP Optical Module Port connections and display

Image Description: Diagram showing how to connect the SFP optical module to the tester and other network devices like routers, transceivers, switches, and network storage. The tester's screen displays SFP power, transmit type, wavelength, length, and temperature. The image notes that a fiber connection mark appears on the screen once connected, and network data can be sent and received.

  • Connect an SFP optical module to the SFP slot on the top of the instrument.
  • Use an optical fiber jumper to connect the SFP module of a switch or other equipment.
  • Supports SFP module hot plug for network connection and related network detection.

4.4 Other Functions

  • WIFI Analyzer: Detects surrounding Wi-Fi signals and strength.
  • Network Tools: Includes Ping, IP scan, Port Flash, DHCP server, and Trace Route.
  • TesterPlay: Allows the tester's screen to be projected to an Android mobile phone or PC.
  • Media Player: Plays 4K video files and MKV/MP4 media files.
  • Quick Office: Supports viewing Excel, Word, and PPT format documents.
  • LLDP/CDP Switch Detection: Detects main capabilities, management addresses, device identification, and other information from network switches.
LLDP/CDP Switch Detection screen

Image Description: The tester's screen displaying LLDP/CDP detection results, including MAC address, version, system information, platform, and port details. A note indicates the testing process takes approximately 60 seconds.

5. Maintenance

5.1 Cleaning

Use a soft, dry cloth to clean the exterior of the tester. Do not use abrasive cleaners or solvents. Keep the screen free from dust and smudges for optimal visibility.

5.2 Battery Care

To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the battery level is low. If storing the device for an extended period, ensure it is charged to about 50% and store it in a cool, dry place.

5.3 Software Updates

The tester supports self-update software, allowing you to install apps with the Android version. Regularly check for and install software updates to ensure compatibility with the latest camera technologies and to benefit from new features and bug fixes. Access the 'Update' icon from the main screen.

6. Troubleshooting

  • Device does not power on: Ensure the battery is charged. Connect the charger and try again. If the issue persists, contact support.
  • Display is blank or frozen: Try restarting the device by holding the power button. If frozen, a forced shutdown might be necessary (refer to specific device instructions if available, or hold power for an extended period).
  • Camera image not displayed: Check all cable connections (coaxial, Ethernet, HDMI). Verify camera power supply. Ensure the camera's video format (IP, AHD, TVI, CVI, CVBS) matches the tester's selected mode.
  • Cable test results are inaccurate: Ensure cables are properly terminated. For TDR tests, ensure the cable is disconnected from all devices.
  • Wi-Fi connection issues: Verify Wi-Fi is enabled on the tester. Check network settings and password.
  • Touch screen unresponsive: Restart the device. Ensure the screen is clean and dry.

7. User Tips

  • Optimize TDR Tests: For the most accurate Time Domain Reflectometry (TDR) results, ensure the cable under test is completely disconnected from all network devices and power sources.
  • Leverage TesterPlay: Utilize the TesterPlay function to project the tester's screen to a mobile phone or PC. This can be very useful for collaborative work, remote viewing, or when working in confined spaces.
  • Keep Software Updated: Regularly check for and install software updates. This ensures compatibility with the latest camera firmware and network protocols, and provides access to new features and performance improvements.
  • Utilize PoE++ Power: When installing or troubleshooting PoE cameras, take advantage of the tester's 90W PoE++ output to power the camera directly, simplifying on-site testing without needing an external PoE injector.

8. Specifications

FeatureSpecification
Display7-inch IPS Touch Screen, 1280x800 resolution
IP Camera Test8K H.265, ONVIF, Hikvision, Dahua tools
Coaxial HD Test8MP TVI/AHD/CVI/EX-SDI, HD-SDI, 3G-SDI
Analog Video In1 channel BNC input & looped output, NTSC/PAL
HDMI Input4K 30FPS
HDMI Output4K 60FPS
VGA Input1920x1080P
PoE++ Power Output55V, Max 90W
DC Power OutputDC24V 2A, DC12V 3A, DC5V 2A
Cable Test (TDR)BNC, Network, Telephone, RVV, Elevator, Cat 5/6 (Max 1.5KM open)
RJ45 Cable TestPair status, length, attenuation, reflectivity, impedance, skew
Digital Multi-meterAC/DC Voltage/Current, Resistance, Capacitance, Continuity
Optical Power MeterCalibrated Wavelengths (850-1650nm), Range -70~+10dBm
Wi-FiBuilt-in, speeds 150M
Battery11.1V 5200mAh Lithium-ion, 3.5h charge, 11h working time
Dimensions240mm x 154mm x 46mm
Weight620g

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your authorized WANGLU dealer or the manufacturer directly. Please have your product model and serial number ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.