RUNTOIN RUYI LIGHT

Contents

Ultra-thin LED Cabinet Light Instruction Manual

Brand: RUNTOIN | Model: RUYI LIGHT

1. Introduction

Thank you for choosing the RUNTOIN Ultra-thin LED Cabinet Light. This rechargeable, motion-sensing, and dimmable light is designed to provide convenient and efficient illumination for various spaces such as kitchens, wardrobes, countertops, and shelves. Its smart sensing capabilities and easy installation make it a versatile lighting solution for your home.

RUNTOIN LED Cabinet Light installed under a wooden shelf, illuminating a desk area with a notebook and plant.
The LED Cabinet Light providing illumination under a shelf.

2. Package Contents

Please check the package for the following items:

  • Ultra-thin LED Cabinet Light
  • Remote Control
  • Metal Mounting Blocks (for magnetic installation)
  • Type-C Charging Cable (not explicitly listed but implied by port)
  • User Manual (PDF version available here)
A 30cm long black LED cabinet light next to its grey remote control.
LED Cabinet Light (30cm model) and Remote Control.

3. Specifications

FeatureDescription
Brand NameRUNTOIN
Model NumberRUYI LIGHT
MaterialABS
OriginMainland China
CertificationCE
Is Bulbs IncludedNo (integrated LED)
Luminous Flux249-2000 Lumen
Brightness200 Lumen
Is DimmableYes
Light ColorCool white, Warm white, Natural white
Power SourceDC
Voltage5V
Power GenerationAlways On (mode)
Is Smart DeviceYes (motion/light sensing)
Installation MethodSelf-contained (magnetic)
Control MethodRemote
EfficiencyEnergy-efficient
Remote Control BatteryBattery required (not included)
Auto Day ModeCabinet lights turn on anytime with motion
Auto Night ModeActivates only in dark environments
High-concerned chemicalNone

4. Setup and Installation

The LED Cabinet Light features easy magnetic installation, allowing for flexible placement without tools.

Installation Steps:

  1. Placing metal block: Identify the desired location for your light.
  2. Peel the backing off: Remove the adhesive backing from the metal mounting block.
  3. Fix it to the cabinet: Firmly press the metal block onto the clean, dry surface. The light will then magnetically attach to this block.
Diagram showing magnetic installation: a metal block is adhered to a surface, and the LED light attaches magnetically. Below are examples of the light installed in various locations like stairs, kitchen, wardrobe, and shelves.
Easy Magnetic Installation and various usage scenarios.

5. Operating Instructions

Functional Overview:

Close-up of the LED light's end, showing a switch, infrared sensing dome, and brightness adjustment buttons.
Close-up of the light's controls: switch, infrared sensing, and brightness buttons.
Close-up of the LED light's end, showing the induction switch (motion sensor) and a Type-C charging port.
Induction switch (motion sensor) and Type-C charging port.

The light features a Light Panel, Remote Control Signal Receiver, Motion Sensor, Brightness Adjustment Buttons, Power/Mode Switch, and a Type-C Port for charging.

Power/Mode Switch Operation:

  1. 1st press: Enters Always-on mode.
  2. 2nd press: Warm light flashes twice, enters Night mode.
  3. 3rd press: White light flashes three times, enters Day mode.
  4. 4th press: Turns off the light.

Smart Motion & Light Sensing Modes:

Illustrations of the three operating modes: Always-on mode (non-stop lighting), Day mode (auto light up when motion is detected in any lighting condition), and Night mode (auto light up when motion is detected in dark conditions).
Smart Motion & Light Sensing Modes and their applications.
  • Always-on Mode: Provides non-stop lighting.
  • Day Mode: The light will turn on automatically when motion is detected, regardless of ambient light conditions.
  • Night Mode: The light will only turn on when motion is detected in dark environments (ambient light less than 20 Lux).

The motion sensor has a detection range of up to 10 feet and a 120° angle. The light will auto-off after 20 seconds of no motion detection in sensor modes.

Diagram illustrating motion sensing and light sensing features, showing a 120-degree detection angle and a 10-foot range. Icons represent 3 work modes, 20s auto-off, motion sensing, and light sensing.
Motion Sensing + Light Sensing: Intelligent sensing triggers more timely.

Remote Control Instructions:

A detailed diagram of the LED Cabinet Light and its remote control, with numbered parts and their functions, as well as remote control button descriptions.
Functional explanation chart and remote control functions.
  1. Please remove the insulating paper under the remote control before first use.
  2. The effective control distance of the remote control is approximately ≤7M. Obstacles will block the control signal.
  3. Within the controllable range, a single remote control can control multiple lamps.

Remote Control Functions:

  • OFF: Turns the light off.
  • ON: Turns the light on.
  • Day mode: Turns on motion sensing all day.
  • Night mode: Activates motion sensing only when ambient light is less than 20 Lux.
  • Brightness Adjustment (+/-): Increases or reduces brightness.
  • Timer (15 min / 45 min): Sets the light to turn off after 15 or 45 minutes.
  • MODE: Adjusts the light color (Cool white, Warm white, Natural white).

6. Maintenance and Safety

  • Keep the lamp clean and free of dust accumulation.
  • Avoid contact with water or excessive humidity.
  • Do not use sharp objects on buttons or surfaces.
  • For indoor use only.
  • Do not use charging devices with an output voltage greater than 5V/1A to charge the lamp.

7. Troubleshooting

IssueSolution
Light does not turn onEnsure the battery is fully charged.
Motion sensor not workingCheck the ambient light conditions (especially for Night mode).
Timer function not workingReconfirm the timer setting on the remote control.

8. User Tips

  • For optimal motion sensing performance, ensure the light is placed in an area where movement is unobstructed within its 10-foot, 120° detection range.
  • Consider using 'Night Mode' in bedrooms or hallways to conserve battery life and avoid unnecessary illumination during daylight hours.
  • Experiment with the different light colors (Cool white, Warm white, Natural white) to find the best ambiance for your space.

9. Warranty and Support

For further assistance, please contact our support team. We are here to help!

You can also refer to the full User Manual (PDF) for more detailed information: Download PDF Manual

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.