SmarDeer SW-WFR-L

Contents

SmarDeer Smart Switch User Manual

Model: SW-WFR-L

1. Product Overview

The SmarDeer SW-WFR-L is a smart switch with an integrated human radar motion sensor, designed for modern smart homes. It offers features such as automatic lighting, theft deterrence, and secure home monitoring. The switch is compatible with both single-pole and neutral wire wiring configurations and can be controlled via the Tuya App, Alexa, and Google Home.

SmarDeer Smart Switch variants (1, 2, 3 gang) with radar sensing, auto light, theft deterring, and secure home features.

Figure 1: SmarDeer Smart Switch (1, 2, and 3 Gang versions)

Key features include:

  • Radar Sense for human presence detection.
  • Auto Light functionality.
  • Theft Deterring capabilities.
  • Secure Home integration.
  • Compatible with both single-pole and neutral wire wiring.
  • Works with Alexa & Google Home.
  • Tuya App Control.
  • Radar functions normally even when offline.

2. Product Specifications

Parameter Value
Relay10A
VoltageAC 110-240V 50/60Hz
Current10A/Gang
Type-C Output5V1A (No Neutral, No function)
Work Temperature0°C~40°C
Wireless Frequency2.4GHz Wi-Fi
MaterialVO flame retardant PC+ABS
UK/EU Size8.6*8.6*3.88cm
US Size12*7.2*3.84cm
Power (No Neutral, 1-3 Gang)3-500W/Gang
Power (Have Neutral, 1-3 Gang)3-300W/Gang
Detection Angle100°
Detection Radius6m
Radar Frequency10GHz

3. Setup and Installation

3.1 Safety Notice

WARNING: Cut off the power before installation. Installation should be performed by a professional electrician.

3.2 Package Contents

  • Smart Switch (1)
  • Screws (2)
  • User Manual (1)
  • Packaging Box (1)
  • Capacitance (1) (Required for No Neutral Wiring)

3.3 Wiring Methods

The SmarDeer Smart Switch supports two main wiring configurations: with a neutral wire and without a neutral wire. Please confirm the wiring method of the switch you purchased to avoid wiring errors.

Wiring diagrams for smart switch with and without neutral wire. The 'Have Neutral Required' diagram shows Live, Neutral, and Light FireWire connections. The 'No Neutral Required' diagram shows Live and Light FireWire connections, with a capacitor connected to L1.

Figure 2: Wiring Diagrams (Have Neutral Required vs. No Neutral Required)

  • Have Neutral Required (0-500W / Gang): Connect Live (L), Neutral (N), and Light FireWire (L1, L2, L3) as shown in the diagram.
  • No Neutral Required (7-500W / Gang): Connect Live (L) and Light FireWire (L1, L2, L3). For this configuration, the L1 terminal must be connected with the provided capacitor.

3.4 Glass Panel Replacement

To replace the glass panel, use a screwdriver to separate the upper and lower parts of the switch. Carefully move the glass panel into position, aligning it with the card slot. Important: When the switch is energized, do not put a cover on the glass panel. If the glass panel is covered while power is applied, the switch will not function. Please restart the main power switch in your home for it to work correctly.

3.5 App Installation and Registration

  1. Download the 'Smart Life' app from your smartphone's app store (Apple App Store or Google Play Store) or by scanning the provided QR code.
  2. Once downloaded, the app will prompt you to register your device. Enter your email, receive a registration code, and create a password.
  3. Ensure your smartphone has both Wi-Fi and Bluetooth functions enabled. Bluetooth is used for fast network pairing only and cannot be used alone.
  4. Before connecting, ensure your smartphone is connected to your home's 2.4GHz Wi-Fi network.

3.6 Wi-Fi Pairing Method

  1. Long press any button on the switch until the indicator light flashes quickly, then release your hand.
  2. Open the 'Smart Life' application. Click on the top right corner of the homepage (usually a '+' icon).
  3. Wait for a moment; a pop-up window will appear. Select "Add" to proceed with pairing.

3.7 RF433 Pairing Method (If applicable)

Please confirm whether the product you purchased has RF433 function.

Pairing signal:

  • Quickly click the switch 5 times.
  • Quickly click the remote control button 2 times.

Clear signal:

  • Quickly click the socket button 8 times.

Note: Not all switches have the RF433 function. This function is targeted at switches with RF433 function. The remote control needs to be purchased separately.

4. Operating Instructions

4.1 Basic Functionality

The SmarDeer Smart Switch provides intelligent control over your lighting. It can detect human presence using its radar sensor, automatically turning lights on or off based on motion and ambient conditions.

Video 1: Product demonstration showcasing radar functions, wiring, and app settings.

4.2 Radar Sensing and Auto Light

The switch uses radar sensing to detect human movement. When motion is detected, it can automatically turn on connected lights (Welcome Light). The radar functions normally even when offline, ensuring continuous operation.

Person walking past a smart switch, activating a welcome light. The image also shows a Wi-Fi router and the text 'Works Even Offline'.

Figure 3: Smart Radar Sensing and Offline Functionality

4.3 Delay Function: Auto-Off Timer

The device can be set to turn off automatically after a period of inactivity. The detection angle is 100° and the detection radius is 6m, utilizing a 10GHz radar. For example, lights can stay on when motion is detected and turn off 10 seconds after no motion is detected.

Diagram illustrating the delay function with 100° detection angle, 6m radius, and 10GHz radar. Shows light turning on with motion and off after 10 seconds of no motion. Also depicts a motion alarm for security.

Figure 4: Delay Function and Motion Alarm

4.4 Security and Alerts

The smart switch can enhance home security by acting as a theft deterrent. When motion is detected during specified times (e.g., at night), it can trigger instant alerts to your smartphone (Motion Alarm) and activate lights, providing an auto-defense mechanism.

4.5 App Control and Customization

The Tuya Smart Life app allows for extensive customization of the switch's behavior:

  • Independent Setting and Timing: Each switch gang can be independently set with motion activation modes and timing functions.
  • Light-Off Delay: Adjust the delay before lights turn off after motion ceases (e.g., 5s, 6s, 7s, 8s, 9s, up to 24H).
  • Sensitivity: Adjust the radar sensor's sensitivity (levels 1-25).
  • Relay Status: Set the relay status (Off, On, Restart Memory).
  • Backlight Switch: Toggle the switch's backlight.
  • Offline Notification: Receive notifications if the switch goes offline.
  • Motion Alarm: Configure motion-triggered alarms.
  • Radar Motion Sensing Lighting: Define up to 7 flexible control modes for your lights, allowing you to choose which switch(es) activate based on motion.
Smartphone app interface showing 7 flexible control modes for radar motion sensing lighting, allowing selection of individual switches or combinations to activate.

Figure 5: App Control for Radar Motion Sensing Lighting

4.6 Event Records

The app allows you to quickly find records and get a clear overview of daily reminders, including motion detection events and switch logs.

5. Maintenance

To ensure optimal performance and longevity of your SmarDeer Smart Switch, follow these maintenance guidelines:

  • Cleaning: Gently wipe the switch surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this may damage the device.
  • Environment: Ensure the switch is installed in an indoor environment within the specified operating temperature range (0°C~40°C). Avoid exposure to direct sunlight, extreme temperatures, or high humidity.
  • Firmware Updates: Regularly check the Smart Life app for any available firmware updates for your switch. Updates can improve performance, add new features, and enhance security.

6. Troubleshooting

  • Switch not functioning after glass panel installation: If the switch is energized, do not put a cover on the glass panel. The glass panel is covered when power is applied, then the switch will not function. Please restart the main power switch in your home; it will then work.
  • Wi-Fi connection issues: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network (5GHz is not supported). Verify that the switch is within range of your Wi-Fi router. Try restarting your router and the switch.
  • Motion detection not working: Check the sensitivity settings in the Smart Life app. Ensure there are no obstructions blocking the radar sensor.
  • Lights not turning on/off: Verify the wiring connections are correct according to the diagrams. If using a 'No Neutral' setup, ensure the capacitor is correctly installed. Check the relay status settings in the app.
  • App not responding: Close and reopen the Smart Life app. Ensure your smartphone's operating system is up to date.

7. Warranty and Support

From the date of purchase, the product has a one-year warranty. If you encounter any product problems or have suggestions, please contact the seller directly. We will address all quality-related issues by replacing or refunding the product. Please note that human-induced damage is not covered under warranty for replacement or refund.

For additional information and guides, you may refer to the official user manual PDF: SmarDeer Smart Switch User Manual (PDF)

8. User Tips

  • Bluetooth for Pairing: Remember that Bluetooth is primarily for fast network pairing and cannot be used for standalone control of the switch.
  • Type-C Output Heat: It is normal for the Type-C output to feel slightly warm (around 55°C) during charging. This is not a cause for concern.
  • Optimal Placement: For best motion detection, consider the detection angle (100°) and radius (6m) when choosing the installation location. Avoid placing objects that might obstruct the radar's field of view.
  • App Customization: Explore the various settings in the Smart Life app, such as sensitivity and light-off delay, to fine-tune the switch's behavior to your specific needs and preferences.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.