1. Introduction
The Chevolink Zigbee Smart Touch Switch (Model 1211ZC) is an advanced smart home device designed to provide convenient control over your lighting. Featuring a sleek toughened glass panel and touch-sensitive buttons, this switch integrates seamlessly into your smart home ecosystem. It supports Zigbee 3.0 for stable connectivity and is compatible with popular voice assistants like Amazon Alexa and Google Home, as well as the Tuya Smart Life App for remote control and automation. A key feature of this model is its ability to operate without a neutral wire and without requiring an additional capacitor, simplifying installation in many existing electrical setups.
2. Safety Information
- Always disconnect the power supply at the circuit breaker before performing any electrical work.
- Basic electrical wiring knowledge or experience is required. If you are unsure, please consult a professional electrician.
- This product is designed for one-way/single-pole circuits only and is not compatible with 2-way switching.
- Ensure the maximum output power of 600W per gang is not exceeded.
- This product has no mechanical relay function, indicating solid-state switching.
- The device operates on low voltage (Below 50Vac or 75Vdc) as per EU LVD Voltage standards.
3. Package Contents
Please check the package for the following items:
- Chevolink Zigbee Smart Touch Switch (1, 2, or 3 Gang version, depending on purchase)
- User Manual (this document, also available as PDF here)
- Mounting Screws
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | Zigbee Smart Touch Switch |
| Product Model | DS-1211ZC |
| Product Color | Black/White (various options available) |
| Power Rating | 3-600W per gang |
| Button Life | 100,000 times |
| Product Material | PC + Toughened Glass Panel |
| Input Voltage | 100-240VAC 50/60Hz |
| Support System | Alexa, Google Home, Tuya Smart Life App |
| Wireless Standards | IEEE802.11b/g/n (for gateway connection), Zigbee 3.0 |
| Wireless Frequency | 2.4GHz |
| Control Operating Temperature | -20°C ~ 50°C |
| Product Size | 11.8cm x 7.2cm x 3.5cm (4.65in x 2.83in x 1.38in) |
| Package Size | 13.8cm x 8.9cm x 5.5cm (5.43in x 3.5in x 2.17in) |
| Certifications | RoHS, CE |
5. Installation & Setup
5.1 Pre-installation Notes
- A Zigbee intelligent gateway (hub) is required and must be purchased separately. This switch does not connect directly to Wi-Fi.
- The Zigbee gateway typically supports a 2.4GHz Wi-Fi network (802.11 b/g/n).
- Ensure the power supply is disconnected at the circuit breaker before starting installation.
- The ON/OFF button can also function as a reset button. Long press any key for 10 seconds to restore factory defaults. Only do this if you intend to erase all settings.
5.2 Wiring Diagram
This Chevolink Smart Touch Switch is designed to work without a neutral wire and does not require a capacitor for typical installations. Please refer to the wiring diagram below and select the method appropriate for your electrical setup. Always ensure the power supply is disconnected before wiring.
For 'NO Need Neutral' Wiring (Recommended for this model):
- Connect the Live Wire to the 'L' terminal on the switch.
- Connect the Live Wire to the 'L1', 'L2', 'L3' terminals (depending on the number of gangs) for the respective light bulbs.
- No Neutral Wire connection is required for the switch itself.
- No capacitor is required for this configuration.
For 'Need Neutral' Wiring (If applicable to your setup):
- Connect the Live Wire to the 'L' terminal on the switch.
- Connect the Neutral Wire to the 'N' terminal on the switch.
- Connect the Live Wire to the 'L1', 'L2', 'L3' terminals (depending on the number of gangs) for the respective light bulbs.
5.3 Physical Installation Schematic
Follow these general steps for physical installation:
- Carefully pry open the front glass panel of the switch.
- Perform the wiring according to the diagram in Section 5.2.
- Mount the switch into the wall box and secure it with screws. Reattach the glass panel.
- Restore power at the circuit breaker. The switch indicator light should start flashing, indicating it's ready for pairing.
5.4 App Download and Registration
To control your smart switch, you need the Tuya Smart Life App:
- Scan the QR code below or search for "Smart Life" in the iOS App Store or Google Play Store.
- Download and install the app.
- Register for a new account or log in if you already have one.
5.5 App Pairing (Zigbee Gateway Required)
Before adding the switch, ensure your Tuya Zigbee Gateway is already set up and connected to the Smart Life App.
- Ensure your phone's Bluetooth and Wi-Fi are turned on.
- Power on the switch. The switch indicator light will automatically enter a fast flashing status when powered on. If not, long press any button for about 10 seconds until it flashes.
- Open the Smart Life app. A pop-up window named "device to be added" should appear at the bottom. Click "Add". If no pop-up appears, restart the app.
- Enter your Wi-Fi account and password (for the gateway's connection), click "NEXT", and wait for the connection to complete.
- Once successfully added, click "Done".
6. Operating Instructions
6.1 Smart Features Overview
- Ultra-low Power Consumption: The switch consumes less than 0.05W.
- Timing Function: Set schedules for automatic ON/OFF.
- Power-on State Setting: Configure the switch's behavior after a power outage (e.g., always off, always on, or remember last state).
- Indicator Light Control: Adjust the behavior of the indicator light (off, indicate state, or indicate position).
- Multi-control Correlation: Link multiple switches for synchronized control.
6.2 Voice Control
The switch is compatible with intelligent voice speakers such as Amazon Alexa and Google Home. Once integrated, you can control your lights with simple voice commands.
- Alexa: "Alexa, turn on the lights."
- Google Home: "Google, turn on the lights."
6.3 App Remote Control
Use the Tuya Smart Life App to control your lights from anywhere, as long as your switch and gateway are connected to the internet.
- Turn lights ON/OFF remotely.
- Use the 'All ON' or 'All OFF' function for quick control of multiple lights.
- Create custom scenes for different activities or moods.
6.4 Timer Setting
Set schedules within the mobile app to automatically turn lights on or off at specific times.
- Create multiple timing plans for different days or scenarios.
- Example: Turn on hallway light at 18:00, turn off bedroom light at 23:30.
6.5 Backlight ON/OFF Option
The switch features a dimmable soft backlight. You can configure the backlight to be ON or OFF, which can help create a better sleeping environment.
6.6 Family Sharing Control
Share control of your smart switch with family members through the Smart Life App. The main account has exclusive permissions and can grant access to others.
6.7 Power-Off Memory
The switch automatically restores to its last known state after a power outage, eliminating the need for manual reset.
7. Maintenance
- Clean the glass panel with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ensure the switch is kept dry and away from excessive moisture.
- Regularly check for firmware updates in the Smart Life App to ensure optimal performance and security.
8. Troubleshooting
- Switch not responding to touch: Ensure power is supplied to the switch. If the issue persists, try resetting the switch by long-pressing any button for 10 seconds.
- Cannot pair with app: Make sure your Zigbee gateway is online and within range. Confirm your phone's Bluetooth and Wi-Fi (2.4GHz) are enabled. Try restarting the app or the switch.
- Voice control not working: Verify that the switch is correctly linked to your Alexa or Google Home account in the Smart Life App. Check your internet connection and the status of your voice assistant device.
- Lights flickering: While this model uses a high-quality magnetic latching relay designed for stability, ensure the load is within the 3-600W range. If flickering occurs, consult a professional electrician.
- Switch is advertised as 'No Neutral Wire' but my electrician says I need one: This specific model (DS-1211ZC) is designed for 'No Neutral Wire' installations without a capacitor. Refer to the 'NO Need Neutral' wiring diagram in Section 5.2. If your existing wiring configuration requires a neutral wire, this specific model might not be suitable, or a different wiring approach may be needed.
9. User Tips
- Zigbee Hub is Essential: This switch operates on Zigbee protocol, not Wi-Fi directly. A dedicated Zigbee hub (like Tuya Zigbee Gateway) is required for smart functionality. Ensure you have one before purchasing or installing.
- Home Assistant (HAOS) Compatibility: Users have reported successful integration with Home Assistant (HAOS) when using the correct Zigbee dongle. This allows for advanced automation and local control.
- Aesthetic Appeal: Many users appreciate the sleek design and good looks of the switch, making it a stylish addition to modern homes.
- Easy Installation & Pairing: The installation process is generally straightforward, and pairing with a compatible Zigbee hub is typically easy once the hub is set up correctly.
10. Warranty & Support
This product is certified with RoHS and CE, ensuring compliance with European safety and environmental standards.
For further assistance or detailed inquiries, please refer to the full user manual available in PDF format: User Manual (PDF).