AKKO Air 01

Contents

Akko Air 01 Mechanical Keyboard User Manual

Model: Air 01 | Brand: AKKO

Introduction

The Akko Air 01 is a low-profile mechanical keyboard designed for versatility and performance. Featuring an 84-key 75% layout, it offers multi-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB Type-C), hot-swappable switches, RGB backlighting, and a durable aluminum case. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your keyboard.

Akko Air 01 Keyboard Overview
Figure 1: Akko Air 01 Keyboard Overview with key features: Aluminum Case, RGB, 75% Layout, Multi-mode, Hot-Swappable.

Package Contents

Please check the package for the following items:

  • Akko Air 01 Mechanical Keyboard
  • USB-C to USB-A Cable
  • 2.4GHz Wireless Receiver (USB-A)
  • Keycap Puller
  • Switch Puller
  • Additional Keycaps (for Windows layout)
  • User Manual (this document)
Akko Air 01 Package Contents
Figure 2: Contents of the Akko Air 01 package.

Setup

1. Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the keyboard to a USB power source using the provided USB-C cable. The keyboard features a 4500mAh battery.

Akko Air 01 4500mAh Battery
Figure 3: The Akko Air 01 keyboard is equipped with a 4500mAh battery.

2. Connection Modes

The Akko Air 01 supports three connection modes: USB Type-C (wired), 2.4GHz wireless, and Bluetooth 5.0. Use the switch located on the side of the keyboard to select your desired mode.

Akko Air 01 Multi-Mode Connectivity Diagram
Figure 4: Multi-mode connectivity diagram showing connections to MacBook, Mac PC, iPad Tablet, and iPhone via 2.4GHz, Type-C, and Bluetooth.
Akko Air 01 Side-Integrated Controls
Figure 5: Side-integrated controls including Win/Mac switch, 2.4G/Off/BT switch, and USB-C port.

2.1. USB Type-C (Wired)

  1. Set the mode switch to 'OFF'.
  2. Connect the USB-C cable to the keyboard and the other end to your computer.
  3. The keyboard will be automatically recognized.

2.2. 2.4GHz Wireless Pairing

  1. Set the mode switch to '2.4G'.
  2. Plug the 2.4GHz USB receiver into your computer's USB port.
  3. Press and hold Fn + Y for 3 seconds to enter pairing mode. The LED indicator will flash.
  4. Once paired, the LED indicator will become solid.

2.3. Bluetooth Pairing

The keyboard supports up to 3 Bluetooth devices (BT1, BT2, BT3).

  1. Set the mode switch to 'BT'.
  2. Press and hold Fn + E (for BT1), Fn + R (for BT2), or Fn + T (for BT3) for 3 seconds to enter pairing mode. The LED indicator will flash.
  3. On your device (computer, tablet, phone), search for Bluetooth devices and select 'Akko Air 01'.
  4. Once paired, the LED indicator will become solid.
  5. To switch between paired Bluetooth devices, press Fn + E/R/T briefly.

3. Switching Operating Systems (Windows/macOS)

The keyboard has a dedicated switch on the side to toggle between Windows and macOS layouts. Use the provided additional keycaps to match your preferred operating system.

Akko Air 01 Mac Native Layout with Windows Keycaps
Figure 6: The Akko Air 01 features a native Mac layout and includes additional keycaps for Windows compatibility.

4. Hot-Swapping Switches

The Akko Air 01 is hot-swappable, allowing you to change switches without soldering. It is compatible with Kailh low-profile hot-swappable switches only.

  1. Using the provided switch puller, carefully grip the switch from the top and bottom.
  2. Gently pull the switch straight up to remove it from the PCB.
  3. Align the pins of the new switch with the holes on the PCB.
  4. Press the new switch firmly until it clicks into place. Ensure the pins are not bent.
Akko Air 01 Hot-Swapping a Switch
Figure 7: Illustration of hot-swapping a switch on the Akko Air 01 keyboard.

Operating Instructions

1. Combination Keys (Fn Functions)

The keyboard utilizes the 'Fn' key for various secondary functions:

FunctionWindows Key CombinationmacOS Key Combination
Brightness DownFn + F1Fn + F1
Brightness UpFn + F2Fn + F2
Mission Control / App SwitcherFn + F3Fn + F3
SearchFn + F4Fn + F4
Keyboard Backlight DownFn + F5Fn + F5
Keyboard Backlight UpFn + F6Fn + F6
Previous TrackFn + F7Fn + F7
Play/PauseFn + F8Fn + F8
Next TrackFn + F9Fn + F9
MuteFn + F10Fn + F10
Volume DownFn + F11Fn + F11
Volume UpFn + F12Fn + F12
CalculatorFn + C
Media PlayerFn + M
EmailFn + E
My ComputerFn + G
Web BrowserFn + W
Toggle Win/Mac LockFn + L_Control
Toggle L_Option/CommandFn + L_Option + Command + Q
Power Saving Mode (Toggle)Fn + R_Shift (hold 3s)Fn + R_Shift (hold 3s)

2. Backlight Control

The Akko Air 01 features customizable RGB backlighting.

  • Adjust Backlight Color: Press Fn + \ to cycle through 7 single colors and RGB cycle in all RGB lighting modes.
  • Adjust Side Lighting Color: Press Fn + L_Command to cycle through 7 single colors and RGB cycle in side lighting mode.
Akko Air 01 RGB Backlighting
Figure 8: Demonstration of the Akko Air 01's RGB backlighting.

3. Battery Level Check

To check the battery level, press Fn + Spacebar. The LED indicators on keys 1-0 will light up according to the charge level:

  • Below 30%: Red light on keys 1-2
  • Below 40%: Green light on keys 1-3
  • Below 50%: Green light on keys 1-4
  • Below 60%: Green light on keys 1-5
  • Below 70%: Green light on keys 1-6
  • Below 80%: Green light on keys 1-7
  • Below 90%: Green light on keys 1-8
  • Below 100%: Green light on keys 1-9
  • Fully Charged: Green light on keys 1-0

4. LED Indicators

The keyboard uses LED indicators to show connection status:

IndicatorStatusDescription
L_Ctrl (Red)FlashingPairing (Bluetooth/2.4G)
L_Ctrl (Red)SolidSuccessfully Connected
Caps (White)SolidCaps Lock On
L_Win (White)SolidWindows Key Locked

5. N-Key Rollover & Polling Rate

The keyboard supports N-Key Rollover, ensuring all key presses are registered simultaneously. The polling rate is 1000Hz in wired and 2.4G mode, and 125Hz in Bluetooth mode.

6. Macro Programming

Macro programming can be done using the Akko Web & Cloud Driver software.

Maintenance

1. Cleaning

  • To clean the keyboard, disconnect it from your computer.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution.
  • For keycaps, you can remove them using the keycap puller and wash them gently with soap and water. Ensure they are completely dry before reattaching.
  • Use compressed air to remove dust and debris from between the keys.

2. Keycap and Switch Care

  • When removing keycaps, use the provided keycap puller to avoid damaging the keycaps or switches.
  • When installing switches, ensure the pins are straight and align correctly with the PCB sockets to prevent bending.

Troubleshooting

1. Keyboard Not Responding

  • Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • 2.4GHz Wireless: Ensure the 2.4GHz receiver is properly plugged in and the keyboard is in 2.4G mode. Re-pair the keyboard if necessary (Fn + Y, hold 3s).
  • Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is in BT mode. Re-pair the keyboard if necessary (Fn + E/R/T, hold 3s). Check if the keyboard is charged.

2. Backlight Issues

  • Ensure the backlight is not turned off (Fn + F5/F6).
  • Check battery level; low battery might disable or dim backlighting.

3. Firmware Update Issues

  • If the keyboard enters boot mode or stops working after a firmware update, contact Akko support for recovery firmware.
  • It is recommended to perform firmware updates on a Windows PC using the Chrome browser for best compatibility.

4. macOS Globe Key Functionality

  • The Akko Air 01 does not natively support Apple's Globe key functionality through its physical Fn key.
  • To achieve Globe key functionality, you may need to use Akko's Cloud Driver and third-party software like Karabiner-Elements for remapping. This may require configuration and could affect other keyboard features.

Specifications

FeatureSpecification
ModelAir 01
Layout75% (84 Keys)
Keycap MaterialPBT Plastic
Keycap PrintingDye-sublimation
SwitchesKailh Low-Profile (Hot-swappable)
BacklightMulticolor (South-facing RGB)
StructureGasket Mount
ConnectionBluetooth 5.0 / 2.4GHz Wireless / USB Type-C
N-Key RolloverSupported
Battery Capacity4500mAh
Polling Rate1000Hz (Wired/2.4G), 125Hz (Bluetooth)
MacroAkko Web & Cloud Driver
Plate MaterialAluminum
Frame MaterialAluminum
Keycap ProfileLow Profile
Product WeightApprox. 612g
Operating SystemsMac OS & Windows
CertificationsCE, WEEE

Kailh Low-Profile Switch Specifications

Kailh Low-Profile Switch Specifications Table
Figure 9: Detailed specifications for Kailh Cloud, Drift, Summer Mini, and Winter Mini low-profile switches.

User Tips

  • The Kailh Cloud switches are noted for being incredibly smooth, quiet, and comfortable for long typing sessions, providing a soft sound without feeling mushy.
  • The low-profile design is ideal for productivity and daily use, especially for macOS users.
  • The keyboard's build quality is excellent, with solid aluminum construction and good-looking keycaps.
  • For firmware updates, it is recommended to use a Windows PC and the Chrome browser to avoid potential issues.
  • If you rely heavily on the macOS Globe key, be aware that it's not natively supported and requires third-party remapping software like Karabiner-Elements, which might involve some setup complexity.

Warranty and Support

Warranty Statement

AKKO provides a one-year warranty for customers in mainland China. For other regions, please contact your seller (AKKO distributor) for specific warranty policies. If the warranty period expires, customers will be responsible for repair costs. Disassembling the keyboard without manufacturer/seller instructions will void the warranty.

Support Information

Shenzhen Yinchen Technology Co., Ltd.
Address: Tower B, 35th Floor, Evergrande, Jiannan Road, Nanshan District, Shenzhen
Phone: 0769-22114578
Website: www.akkogear.com
Customer Service Hours: Monday to Friday, 10:00 AM to 6:00 PM (excluding national holidays).

For further assistance, please refer to the official user manual PDF: Akko Air 01 User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.