1. Safety Warnings
- This product is designed for snorkeling only. Do not use it for professional underwater activities such as scuba diving or diving rescue, as it does not provide sufficient protective performance for such uses.
- Children must use this product under direct adult supervision. Never allow children to use it alone to prevent accidents like swallowing the mouthpiece, choking on water, or damaging the product.
- Warning: Only to be used in water in which the child is within its depth and under adult supervision.
- Do not scratch the mask lens or snorkel tube with hard objects (e.g., nails, knives, sand) to avoid damaging clarity or tube tightness.
- Do not soak the set in seawater or sewage for extended periods. Avoid storing it in high-temperature, sun-exposed, humid, or closed environments to prevent silicone aging, lens blurring, and tube deformation.
- Do not cut, disassemble, or modify any part of the mask or snorkel (including the silicone skirt, anti-choking valve, headband). Unauthorized modifications will damage the product structure, affect safety, and void any warranty.
- Do not clean the product with alcohol or corrosive cleaners, as this can damage silicone and PC materials and reduce the product's service life.
2. Setup and Preparation
- Inspect the Kit: Before each use, thoroughly inspect all components. Ensure the mask lens is free of scratches and damage. Check the silicone skirt for any deformation or cracks. Verify that the snorkel mouthpiece is undamaged and the anti-choking valve opens and closes smoothly. Confirm all fasteners are secure. If using snorkeling fins (not included), inspect them for damage or cracks.
- Wear the Mask: Place the mask on your face, ensuring the silicone skirt forms a seal around your eyes and nose. Adjust the headband tightness until the mask fits snugly and comfortably, preventing any air or water leakage. Avoid overtightening, which can compress your face, or leaving it too loose, which allows water to enter.
- Wear the Snorkel: Insert the snorkel mouthpiece into your mouth and adjust it to a comfortable position. There is no need to bite down excessively. Secure the snorkel to the mask strap using its integrated fastener, ensuring it is stable and will not fall off during use.
- Using Snorkeling Fins (Optional): After donning the mask and snorkel, insert your feet into the fin covers. Adjust them for a snug fit against your feet, ensuring they are secure and do not rub. Remember that movement is restricted when wearing fins; move slowly to avoid tripping.

Figure 1: Adjusting the headband for a secure fit. Features include silicone nose guard, anti-fog HD lenses, and soft silicone for a leak-proof seal.
3. Operating Instructions
- During Snorkeling: Maintain constant contact between the mask and your face. Avoid frequently touching the lens to prevent scratching or damaging the seal. Ensure the tip of the snorkel remains above the water surface and breathe evenly through it.
- Clearing Water from Mask/Snorkel: If water accidentally enters the mask or snorkel, gently blow air out through the anti-choking valve to expel it.
- Movement with Fins: If using fins, keep your legs naturally straight and use them to move gently for propulsion. Avoid excessive force, which can lead to muscle fatigue or fin damage.
Video 1: Product showcase demonstrating various color options and components of the snorkeling set.

Figure 2: User enjoying snorkeling with the set, highlighting anti-fog, anti-glare, and tempered glass features.

Figure 3: The mask offers a 180° panoramic view with anti-glare and anti-fog tempered glass.
4. Maintenance
- After Use: Promptly remove the mask, snorkel, and any fins.
- Rinsing: Rinse the mask (lens and silicone skirt), snorkel (inside and mouthpiece), and fins separately with clean fresh water. This removes salt, sand, and other impurities.
- Drying: Dry all components thoroughly.
- Storage: Store the set in a well-ventilated area, away from direct sunlight and high temperatures. Proper storage prevents fogging of the lens and mold growth.
- Cleaning Agents: Do not use alcohol or corrosive cleaners, as these can damage the silicone and PC materials.
5. Troubleshooting
- Water Leaking into Mask: Ensure the mask is properly fitted and the headband is adjusted for a snug, but not overly tight, seal. Check the silicone skirt for any damage or debris that might be breaking the seal.
- Water in Snorkel: If water enters the snorkel, ensure the dry-top mechanism is functioning correctly. Blow sharply into the snorkel to clear water through the purge valve.
- Fogging Mask: Ensure the mask is clean before use. A common tip is to lightly rub a small amount of baby shampoo (no-tears formula) on the inside of the lens, then rinse lightly with water before use. Always store the mask dry and in a well-ventilated area.
- Lens Clarity Issues: If the lens appears blurry or scratched, inspect it for physical damage. Avoid cleaning with abrasive materials or scratching with hard objects.
- Silicone Deformation/Cracks: This can be caused by improper storage (e.g., high heat, prolonged sun exposure). Ensure proper storage conditions as outlined in the Maintenance section.
6. Specifications
| Feature | Description |
|---|---|
| Product Name | Snorkeling Two-Piece Set (Mask + Snorkel) |
| Brand | XIAOTREE |
| Models | HM1873, HM1873+DS10022, HM1653, HM1937, HM1939, HM1933, HM1923 |
| Materials | Hard PC, Liquid Silicone, Tempered Glass |
| Lens Type | Tempered Glass, Anti-Fog, Anti-Glare, Impact-Resistant |
| View Angle | 180° Panoramic View |
| Mask Skirt | Soft Silicone, Ergonomic Design, Leak-Proof Fit |
| Snorkel Type | Dry Top Snorkel with Float Valve and One-Way Purge Valve |
| Origin | Mainland China |
7. User Tips
- Pre-Dive Check: Always perform a quick check of your gear before entering the water to ensure everything is secure and undamaged.
- Fit is Key: A proper fit of the mask is crucial to prevent leaks. Experiment with headband tension until you find a comfortable, watertight seal.
- Practice Breathing: If new to snorkeling, practice breathing through the snorkel in shallow water or even at home to get accustomed to it.
- Buoyancy: Some users find the set to be 'a bit light'. Be mindful of your buoyancy in the water and adjust as needed.
8. Warranty and Support
Warranty information for this product is typically provided with your purchase documentation or on the product packaging. Please refer to those resources for specific details regarding coverage and duration.
Please note that any unauthorized modifications, disassembly, or improper use of the product will void the warranty.
For product support, technical assistance, or warranty claims, please contact the seller or retailer from whom you purchased this XIAOTREE Scuba Diving Mask Snorkel Set.