Introduction
The Playaibox P19T is a versatile 4-in-1 wireless adapter designed to upgrade your in-car connectivity. It seamlessly converts your car's existing wired CarPlay or Android Auto system into a wireless experience, and also supports AirPlay and Miracast for smart screen mirroring. Enjoy plug-and-play functionality, automatic connection, and intelligent voice assistant features for a safer and more convenient driving experience.
Product overview highlighting key features.
Safety Information & Cautions
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
DANGER: To avoid danger of suffocation, keep this bag away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.
Specifications
| Attribute | Value |
|---|---|
| Product Name | Wireless CarPlay Adapter |
| Model | P19T |
| Rated Voltage | 1A |
| Origin | Mainland China |
| Bluetooth Version | 5.0 |
| WiFi Frequency | 2.4G+5G |
| Features | Wireless Carplay, Wireless Android Auto, OTA Update, Plug and play, Carplay adapter, Android auto adapter, Airplay, Miracast, Smart Screen Mirroring |
| Conditions of Use | Only Support Original Car With Wired Carplay/Android Auto |
| Supported Car Brands | For Audi, Benz, Volvo, VW, Toyota, Skoda, Seat, Nissan, Mazda, Lexus, Kia, Jeep, Jaguar, Hyundai, Honda, Haval, GMC, Ford, Chevrolet, Citroen, Buick, Cadillac, Chery, MG |
| Wireless CarPlay Compatibility | iPhone 6 and above, iOS 10 or above |
| Wireless Android Auto Compatibility | Android 11 and above mobile phone models that support wireless Android Auto |
Wide compatibility with various car models and phone operating systems.
Setup & Installation
The P19T adapter is designed for plug-and-play convenience. Ensure your vehicle is equipped with a factory-installed wired CarPlay or Android Auto system for compatibility.
Wireless CarPlay / Android Auto Connection Steps
- Connect the P19T adapter to your car's USB port (usually the one used for wired CarPlay/Android Auto).
- On your car's infotainment screen, click on the CarPlay or Android Auto icon that appears on the interface.
- Ensure your mobile phone's Bluetooth is turned on.
- Turn on both Bluetooth and Wi-Fi on your mobile phone.
- On your phone, search for Bluetooth devices and find the device name displayed on your car's screen (e.g., "SmartBox-XXXX").
- Pair your phone with the adapter via Bluetooth. After successful Bluetooth connection, the system will automatically recognize and connect to Wireless CarPlay or Android Auto.
Video demonstrating the connection process for Wireless CarPlay.
Mirror Link (AirPlay / Miracast) Connection Steps
The P19T adapter supports both AirPlay for iOS devices and Miracast for Android devices, allowing you to mirror your phone's screen to your car's display.
- Ensure the P19T adapter is connected to your car and powered on.
- On your mobile phone, turn on Wi-Fi.
- Access the wireless screen mirroring function on your phone. This is usually found in the quick settings drop-down menu or by searching in your phone's settings (e.g., "Screen Mirroring", "Smart View", "Cast").
- In the list of available devices, find the device name of the P19T adapter (e.g., "SmartBox-XXXX").
- Click on the device name to connect and cast your screen.
Mirror screen projection in action.
Operating Instructions
Using Wireless CarPlay / Android Auto
Once connected, your car's display will show the familiar CarPlay or Android Auto interface. You can interact with it using your car's touchscreen, steering wheel controls, or voice commands.
Main interface showing available connectivity options.
Intelligent Voice Assistant
The P19T adapter supports intelligent voice assistants, allowing for hands-free control of navigation, music, calls, and more. Simply activate your phone's voice assistant (Siri for iOS, Google Assistant for Android) and speak your commands.
Hands-free control with intelligent voice assistant.
Using AirPlay / Miracast (Screen Mirroring)
After establishing a mirror link connection as described in the setup section, your phone's screen content will be displayed on your car's screen. This allows you to view videos, photos, or other apps directly from your phone.
- Android Miracast supports anti-control function for mobile phones. Samsung phones use this function to support Samsung Dex. Google does not support screen projection.
- iPhone supports screen projection with iOS version 18 or higher.
Maintenance
- Keep the device dry and clean. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
- Do not attempt to disassemble or repair the device yourself. This will void the warranty and may cause damage.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the USB port and cable are free from dust and debris to maintain a stable connection.
Troubleshooting
If you encounter issues with your P19T adapter, please refer to the following common problems and solutions:
Connection Issues (CarPlay/Android Auto)
- Device not connecting or frequently disconnecting:
- Ensure your car has factory-installed wired CarPlay/Android Auto.
- Verify both Bluetooth and Wi-Fi are enabled on your phone.
- Check that your phone is paired correctly via Bluetooth to the adapter.
- Try restarting both your phone and your car's infotainment system.
- Ensure the adapter is securely plugged into the car's USB port.
- Lag or delay in response:
- While some minimal delay can occur with wireless connections, significant lag might indicate interference. Try moving your phone closer to the adapter.
- Ensure your phone's operating system and the adapter's firmware are up to date.
- Close unnecessary apps on your phone to free up resources.
Audio & Call Problems
- No audio during calls or music, or unable to adjust volume:
- Check your phone's volume settings and your car's audio settings.
- Ensure the adapter's Bluetooth connection is stable.
- Some car models (e.g., Clio 5) might have specific audio routing issues; check for firmware updates for the adapter or consult your car's manual.
- If calls are not audible, ensure your phone's microphone permissions are granted for CarPlay/Android Auto.
Screen Mirroring Issues (AirPlay/Miracast)
- Screen mirroring not working, blurry video, or audio delay:
- Ensure your phone's Wi-Fi is on and connected to the adapter's Wi-Fi network (if applicable, or direct mirroring).
- Verify your phone's screen mirroring function is correctly activated and connected to the adapter's device name.
- Check if your phone's OS version meets the requirements (e.g., iOS 18+ for iPhone screen projection).
- Some apps or content may have restrictions on screen mirroring.
- Video quality and aspect ratio issues can sometimes be due to phone settings or app limitations.
Device Crashing or Freezing
- Car screen goes blank or adapter crashes:
- This could be a software issue. Check for available OTA updates for the adapter.
- Try disconnecting and reconnecting the adapter.
- If the issue persists, contact customer support.
Compatibility
- Device does not work with specific car models (e.g., Kia Stonic 2018):
- The adapter requires a factory-installed wired CarPlay/Android Auto system. Double-check your car's specifications.
- While compatible with many brands, specific models or years might have unique system configurations.
- Refer to the official product page or contact support for a detailed compatibility list.
OTA Update Failure
- Unable to update the adapter's firmware via OTA:
- Ensure a stable internet connection during the update process.
- Do not disconnect power during the update.
- If the update fails, try again or contact customer support for assistance.
User Tips
- Quick Connection: Many users report fast and easy connection, especially for Android Auto.
- Check Bluetooth Name: When connecting, ensure you select the correct Bluetooth device name (e.g., "SmartBox-XXXX") that appears on your car's screen.
- Screen Mirroring: For screen mirroring, remember to enable Wi-Fi on your phone and look for the screen mirroring option in your phone's quick settings or display settings.
- Voice Assistant: Utilize the intelligent voice assistant for hands-free navigation and music control to enhance driving safety.
Warranty & Support
For detailed warranty information, returns, or technical support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for further reference.
Manufacturer E-mail: 74649192@qq.com
Manufacturer: Huizhou Dingpai E-commerce Co., Ltd.
Address: Unit 01-2, 6th Floor, Building 2, Phase II, Lechuangcheng Smart Park, No. 6, Ailuo Sixth Road, Shuikou Street, Huicheng District, Huizhou City
This product complies with EC and UKCA regulations, indicated by the CE and UKCA markings.