Debra DP-10

Contents

Debra DP-10 Professional Mixing Console

User Manual

Model: DP-10

1. Introduction

Thank you for choosing the Debra DP-10 Professional Mixing Console. This high-performance DJ mixer is designed for recording studios and live sound applications, offering advanced features such as 99 DSP reverb adjustments, Bluetooth connectivity, and versatile USB options. This manual provides essential information for the safe and efficient operation of your new mixing console.

Debra DP-10 Professional Mixing Console front view

Figure 1: Debra DP-10 Professional Mixing Console

For a visual overview of the product, please watch the official product video:

Video 1: Debra DP-10 Audio Mixer Overview

2. Important Safety Instructions

  • Read these instructions thoroughly before operating the device.
  • Keep these instructions for future reference.
  • Heed all warnings on the product and in the operating instructions.
  • Follow all instructions.
  • Do not use this apparatus near water.
  • Clean only with a dry cloth.
  • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  • Only use attachments/accessories specified by the manufacturer.
  • Unplug this apparatus during lightning storms or when unused for long periods of time.
  • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Caution: To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Do not open the casing; there are no user-serviceable parts inside. Refer servicing to qualified personnel.

3. Setup and Connections

Before connecting any devices, ensure the mixing console is powered off. Connect all cables securely to prevent signal loss or damage.

3.1 Power Connection

  1. Locate the DC IN port on the rear panel of the mixer.
  2. Connect the provided power adapter to the DC IN port.
  3. Plug the power adapter into a suitable power outlet.
  4. Turn on the mixer using the POWER switch on the rear panel.
Rear panel of Debra DP-10 mixer showing power input and switch

Figure 2: Rear Panel Connections (Note: This image is primarily for DSP Reverb, but also shows the power input and switch on the back panel.)

3.2 Audio Input Connections

The DP-10 offers various input options for microphones, line-level instruments, and stereo sources.

  • Microphone Inputs (MIC 1-6): Use XLR cables for microphones. The mixer provides +48V phantom power for condenser microphones. Ensure +48V is turned on when using condenser microphones.
  • Line Inputs (LINE IN 1-6): Use 6.5mm (1/4-inch) TS/TRS cables for line-level instruments or devices.
  • Stereo Inputs (STEREO 7/8, 9/10): Use 6.5mm (1/4-inch) TS/TRS cables for stereo line-level sources. The 7/8 input also supports mono input.
Microphone connected to Debra DP-10 mixer with +48V power supply

Figure 3: Connecting a Microphone with +48V Phantom Power

3.3 Audio Output Connections

  • Main Outputs (MAIN OUTS L/R): Connect to your main PA system or recording interface using XLR or 6.5mm (1/4-inch) cables.
  • Control Room Output (CTRL OUT L/R): Connect to studio monitors for monitoring purposes.
  • Headphone Output (PHONES): Connect headphones for personal monitoring.
  • Record Output (REC L/R): Use RCA cables to connect to a recording device.

3.4 USB Connectivity

The DP-10 features a USB interface for versatile audio handling.

  • PC Connection: Use a data cable to connect the mixer to your PC for recording or playback.
  • USB Stick: Insert a USB stick to play audio files directly from the mixer or record your mix onto the stick.
Debra DP-10 mixer showing USB connection options to PC and USB stick

Figure 4: USB Connection Options

3.5 Bluetooth Connectivity

Connect your Bluetooth-enabled devices for wireless audio streaming.

  1. Ensure the mixer is powered on.
  2. Activate Bluetooth on your external device (e.g., smartphone, tablet).
  3. On the mixer's digital display, select the Bluetooth mode.
  4. Search for "DP-10" or a similar device name on your external device and pair.
  5. Once connected, you can stream audio wirelessly to the mixer.
Debra DP-10 mixer showing Bluetooth 5.0 connectivity with a smartphone

Figure 5: Bluetooth 5.0 Wireless Transmission

4. Controls and Functions

The Debra DP-10 features a comprehensive set of controls for precise audio mixing and effects processing. Refer to Figure 1 for a visual layout of the controls.

4.1 Input Channel Section (MIC 1-6, STEREO 7/8, 9/10)

  • MIC/LINE IN: Combination XLR/6.5mm jacks for microphone and line-level inputs.
  • GAIN Control: Adjusts the input sensitivity for each channel.
  • HIGH/MID/LOW EQ: 3-band equalizer for adjusting high, mid, and low frequencies of each channel.
  • AUX Controls: Sends signal to auxiliary outputs (AUX1, AUX2) for monitors or external effects.
  • PAN/BAL Control: Adjusts the stereo position (pan for mono, balance for stereo).
  • MUTE Button: Mutes the channel output.
  • PFL Button: Pre-Fader Listen, sends the channel signal to headphones for monitoring before the fader.
  • Channel Fader: Adjusts the volume level of the individual channel.

4.2 Master Section

  • 24BIT DUAL ENGING DSP (99 DSP): Digital Signal Processor with 99 built-in effects. Use the UP/DOWN buttons to select effects and MODE to adjust parameters.
  • 7 BAND GRAPHIC EQUALIZER: Provides precise frequency shaping for the main mix (63Hz, 150Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz).
  • MAIN MIX Faders (L/R): Controls the overall volume of the main stereo output.
  • EFFECT Fader: Adjusts the level of the selected DSP effect in the main mix.
  • PHONES Control: Adjusts the headphone output volume.
  • USB/MP3 Section: Controls for USB playback/recording and Bluetooth functions. Includes play/pause, mode selection, and track navigation.
Debra DP-10 mixer showing 99 DSP Reverb effects list

Figure 6: 99 DSP Reverb Effects List

Debra DP-10 mixer showing 7-Band Graphic Equalizer controls

Figure 7: 7-Band Graphic Equalizer Controls

5. Operating Instructions

5.1 Basic Mixing

  1. Connect your audio sources (microphones, instruments, etc.) to the appropriate input channels.
  2. Connect your main speakers or recording device to the MAIN OUTS.
  3. Turn on the mixer and then your connected audio devices.
  4. Set all channel faders and the MAIN MIX faders to their lowest position.
  5. Gradually increase the GAIN control for each active input channel until the signal is strong but not clipping (indicated by the CLIP LED).
  6. Adjust the HIGH, MID, and LOW EQ controls to shape the tone of each channel.
  7. Use the PAN/BAL control to position the sound in the stereo field.
  8. Slowly raise the individual channel faders to the desired level.
  9. Finally, raise the MAIN MIX L/R faders to achieve the overall output volume.

5.2 Using DSP Effects

  1. On the DSP section, use the UP/DOWN buttons to browse through the 99 available effects.
  2. Press the MODE button to select and adjust parameters for the chosen effect.
  3. Use the dedicated EFFECT fader to control the amount of effect applied to the main mix.
  4. Adjust the AUX sends on individual channels to send specific amounts of signal to the DSP unit.

5.3 USB Playback/Recording

  • Playback from USB: Insert a USB stick with audio files. Use the controls in the USB/MP3 section (Play/Pause, Next/Previous, Mode) to navigate and play tracks.
  • Recording to USB: Ensure a formatted USB stick is inserted. Select the recording mode in the USB/MP3 section and press record. The main mix will be recorded.
  • PC Audio Interface: Connect the mixer to a PC via USB. The mixer will be recognized as an audio interface, allowing you to record individual channels or the main mix into your DAW software, or play audio from your PC through the mixer.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the mixer. Do not use liquid cleaners or solvents.
  • Ventilation: Ensure that the ventilation openings are not blocked to prevent overheating.
  • Storage: When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Cable Care: Always handle cables by the plug, not the wire. Avoid sharp bends or kinks in cables.

7. Troubleshooting

Problem Possible Cause Solution
No sound output
  • Power not connected or switched on.
  • Main Mix faders are down.
  • Channel faders are down.
  • Mute button engaged on channel or main.
  • Cables incorrectly connected or faulty.
  • Output device (speakers/amp) off or muted.
  • Check power connection and switch.
  • Raise Main Mix faders.
  • Raise relevant channel faders.
  • Disengage mute buttons.
  • Check all audio cables and connections. Test with new cables if necessary.
  • Ensure output device is powered on and unmuted.
Distorted sound
  • Input GAIN too high.
  • Output level too high.
  • Faulty cable or connection.
  • Reduce input GAIN until CLIP LED no longer illuminates.
  • Lower Main Mix faders or output device volume.
  • Check and replace cables if necessary.
No Bluetooth connection
  • Bluetooth mode not selected on mixer.
  • Device not in pairing mode.
  • Interference.
  • Ensure Bluetooth mode is active on the mixer's display.
  • Put your external device into pairing mode and search for the mixer.
  • Move closer to the mixer or away from other wireless devices.
Phantom power not working
  • +48V switch is off.
  • Microphone not compatible or faulty.
  • Ensure the +48V switch is engaged.
  • Test with a known working condenser microphone.

8. Specifications

Feature Detail
Model Number DP-10
Type Mixers
Brand Name Debra (Manufactured by IKGE)
Power Source AC&DC
Voltage Range Low voltage non-USB (below 75V DC, below 50V AC)
Inbox Adaptor Yes
Built-in Battery No
DSP Effects 99 Digital Reverb Effects
Equalizer 7-Band Graphic Equalizer
Connectivity USB Interface, Bluetooth 5.0
Origin Mainland China
Certification CE, FCC, RoHS
Package Dimensions (L x W x H) 46 cm x 48 cm x 12 cm
Package Weight 4.4 kg

9. User Tips

Based on general user experience with similar mixing consoles, here are some tips to enhance your usage:

  • Gain Staging: Always set your input gain (GAIN knob) correctly. Too low, and you'll introduce noise when boosting later; too high, and you'll get distortion. Aim for a strong signal without the CLIP LED lighting up consistently.
  • EQ Usage: Use the EQ to subtly enhance or correct frequencies, rather than drastically cutting or boosting. Small adjustments often make a big difference.
  • Phantom Power: Remember to only activate +48V phantom power for condenser microphones. Dynamic microphones do not require it and can sometimes be damaged if connected while phantom power is active.
  • Effect Experimentation: The 99 DSP effects offer a wide range of creative possibilities. Experiment with different reverb types (Hall, Plate, Room) and delays to find what best suits your audio.
  • Monitoring: Utilize the PFL (Pre-Fader Listen) function with headphones to monitor individual channels without affecting the main mix, which is crucial for setting levels and troubleshooting.
  • USB Recording: Before recording to a USB stick, ensure it is properly formatted and has sufficient free space. Check the recorded file on a computer to confirm quality.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product page or contact the seller directly. Keep your purchase receipt as proof of purchase.

A digital version of the user manual (PDF) is available for download:

View User Manual (PDF)


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.