Ajazz AK820 Pro ISO-ES

Contents

EPOMAKER X AJAZZ AK820 PRO ISO-ES Mechanical Keyboard

Model: AK820 Pro ISO-ES

Introduction

Thank you for choosing the EPOMAKER X AJAZZ AK820 PRO ISO-ES Mechanical Keyboard. This keyboard features a compact 75% layout with a Spanish ISO key arrangement, offering versatile connectivity options including wired USB-C, 2.4GHz wireless, and Bluetooth. It boasts hot-swappable switches, vibrant RGB lighting, a customizable TFT screen, and durable PBT keycaps, providing a premium and personalized typing experience.

This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your keyboard. For a more comprehensive guide, please refer to the official user manual PDF available at: User Manual (PDF).

Package Contents

The EPOMAKER X AJAZZ AK820 PRO ISO-ES package includes the following items:

  • EPOMAKER X AJAZZ AK820 PRO ISO-ES Mechanical Keyboard
  • USB-C to USB-A Cable
  • 2.4GHz Wireless Receiver
  • Keycap Puller
  • Switch Puller
  • Spare Switches (Ajazz Gift Switch)
  • Quick Start Guide (this document, also available as PDF)
Contents of the Ajazz AK820 Pro ISO-ES keyboard package
Figure 1: Package contents including the keyboard, cable, switch puller, keycap puller, and spare switches.

Product Overview

The AK820 PRO ISO-ES features a compact 75% layout, integrating essential keys while saving desk space. It includes a rotary knob for quick adjustments and a TFT screen for displaying important information such as time, connectivity mode, and battery status.

Front view of the Ajazz AK820 Pro ISO-ES keyboard in grey with yellow accents
Figure 2: Front view of the Ajazz AK820 Pro ISO-ES keyboard, highlighting the Spanish ISO layout and TFT screen.
Front view of the Ajazz AK820 Pro ISO-ES keyboard with RGB lighting active
Figure 3: The keyboard showcasing its vibrant RGB lighting.
Side profile of the Ajazz AK820 Pro ISO-ES keyboard with kickstands folded down
Figure 4: Side view of the keyboard with its adjustable kickstands folded down.
Side profile of the Ajazz AK820 Pro ISO-ES keyboard with kickstands extended
Figure 5: Side view of the keyboard with its adjustable kickstands extended for ergonomic typing.
Close-up view of the keycap profile, showing different heights and angles
Figure 6: Detailed view of the keycap profile, illustrating the ergonomic design.

Setup

Connectivity Modes

The AK820 PRO ISO-ES supports three connection modes: wired, 2.4GHz wireless, and Bluetooth.

  • Wired Mode: Connect the keyboard to your computer using the provided USB-C cable. The keyboard will be automatically recognized and ready for use.
  • 2.4GHz Wireless Mode: Insert the 2.4GHz receiver into an available USB port on your computer. The keyboard should connect automatically. If reconnection is needed, hold Fn + R for 5 seconds to initiate rematching.
  • Bluetooth Mode: The keyboard can connect to up to three Bluetooth devices.
    1. To connect to Bluetooth Device 1, hold Fn + Q for 5 seconds until the indicator light flashes, then pair with your device. Press Fn + Q to toggle to Device 1 after pairing.
    2. To connect to Bluetooth Device 2, hold Fn + W for 5 seconds until the indicator light flashes, then pair with your device. Press Fn + W to toggle to Device 2 after pairing.
    3. To connect to Bluetooth Device 3, hold Fn + E for 5 seconds until the indicator light flashes, then pair with your device. Press Fn + E to toggle to Device 3 after pairing.

Custom Software

The keyboard supports custom software for advanced customization of key assignments, macros, and lighting effects. Please visit the official EPOMAKER or Ajazz website to download the latest software version compatible with your operating system.

Operating Instructions

Function Key Combinations

Utilize the Fn key in combination with other keys to access various functions:

Combination Function
Fn + SpaceRestore Factory Setting
Fn + QHold to connect to Bluetooth Device 1 / Press to toggle to Bluetooth Device 1
Fn + WHold to connect to Bluetooth Device 2 / Press to toggle to Bluetooth Device 2
Fn + EHold to connect to Bluetooth Device 3 / Press to toggle to Bluetooth Device 3
Fn + RHold to rematch the 2.4Ghz Receiver
FN + KNOBToggle Knob Function (from volume control to screen control)
FN + WIN (Only for Windows)Lock/Unlock Windows key
FN + PgUpPrtsc (Print Screen)
FN + PgDnPause

Lighting Control

Adjust the keyboard's RGB backlight using these combinations:

Combination Function
Fn + ↑Backlight Brightness +
Fn + ↓Backlight Brightness -
Fn + XTurn On/Off Backlight
Fn + ZToggle Backlight Effect
Fn + ←Toggle Backlight Effect Direction
FN + '?'Backlight Effect Speed -
FN + ¡¿Backlight Effect Speed +

Maintenance

General Cleaning

To maintain your keyboard's performance and appearance, regularly clean it with a soft, dry cloth. For deeper cleaning, you can use a can of compressed air to remove dust and debris from between the keycaps. Avoid using harsh chemicals or abrasive materials.

Keycap and Switch Replacement

The AK820 PRO ISO-ES features hot-swappable switches, allowing you to easily change switches without soldering. Use the provided keycap puller to remove keycaps and the switch puller to remove switches. When inserting new switches, ensure the pins are aligned correctly to avoid bending them.

For a full guide on how to replace keycaps and switches, please refer to the detailed instructions available via the QR code in the Quick Start Guide or the official user manual PDF.

Troubleshooting

  • Keyboard not responding: Ensure the keyboard is properly connected (wired, 2.4GHz receiver, or Bluetooth). Check the battery level if in wireless mode. Try restarting your computer.
  • Wireless connection issues: Ensure the 2.4GHz receiver is securely plugged in and within range. For Bluetooth, ensure the keyboard is in pairing mode and selected on your device. Try re-pairing the device.
  • Bluetooth pairing problems: Make sure Bluetooth is enabled on your host device. Remove any previous pairings of the keyboard from your device's Bluetooth settings and attempt to pair again.
  • Backlight not working: Check if the backlight is turned off (Fn + X). Adjust brightness using Fn + ↑ or Fn + ↓.
  • Knob not functioning: Ensure the knob function is set correctly (volume or screen control) by pressing FN + KNOB.
  • Keys not registering: If individual keys are not working, try replacing the switch for that key, as the keyboard is hot-swappable.

Specifications

Feature Detail
Brand NameAjazz
ModelAk820 Pro Iso-Es
Keyboard Standard82 Key (75% Layout)
Operation StyleMechanical
TypeWired, 2.4Ghz Wireless, Bluetooth
Interface TypeUSB
Keycup MaterialPBT plastic
Keycup PrintingDoublshot
Switches Hot SwapYes
Backlight TypeMulticolor RGB
Axis Body BrandAjazz
Full Size KeyboardNo
Wrist SupportNo
PackageYes
Battery IncludedYes
LanguageEurope (Spanish ISO)
ApplicationDesktop, Laptop, Number, Tablet
OriginMainland China
High-concerned chemicalNone
Length36 cm
Width16 cm
Height5 cm
Weight1.09 kg

User Tips

  • Mac Compatibility: While the keyboard is primarily designed for Windows, it can be used with Mac devices. However, some key legends or functions (like the Windows key) may not directly correspond. Consider using third-party software for key remapping if specific Mac functions are desired.
  • Battery Management: To prolong battery life in wireless modes, turn off the RGB backlight when not needed. The TFT screen also provides a battery indicator for convenient monitoring.
  • Customization: Explore the custom software to unlock the full potential of your keyboard, including personalized key assignments, macro creation, and unique RGB lighting profiles.

Warranty & Support

Warranty Policy

EPOMAKER's Warranty covers any factory defects that might affect the proper functionality of your purchase. It does not cover any damage that may occur from normal wear and tear. Your product will not be covered by the 1-year warranty if inspection shows any sign of modification or changes unsupported by the original product, including changing internal components, assembling and reassembling the product, or replacing batteries, etc. The warranty is valid only for items bought from official EPOMAKER stores.

Technical Assistance

For technical assistance, please email support@epomaker.com. Include your purchase order number and a detailed description of your issue. EPOMAKER typically responds to inquiries within 24 hours. If you purchased your keyboard from a distributor and not directly from an official EPOMAKER store, please contact the distributor for assistance.

Additional Resources

For more detailed instructions and tutorials, you can refer to the comprehensive user manual PDF or scan the QR codes provided in the Quick Start Guide for specific topics like "How to Use" and "How to Replace Keycaps & Switches".

Compliance and Safety Information

This device is CE, RoHS, and FC compliant.

Warning: Choking Hazard

This product contains small parts. Keep away from children and pets to prevent choking hazards.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.