Diymore Single-Speed Driver Board YN-JWX-8-C

Contents

Diymore Single-Speed Driver Board (YN-JWX-8-C) User Manual

Model: YN-JWX-8-C | Brand: Diymore

Introduction

This manual provides detailed instructions for the Diymore Single-Speed Driver Board (YN-JWX-8-C). This compact and versatile module is designed for DIY flashlight modifications, small motor control, and high-power LED applications. It features a self-locking mechanical switch design and a Type-C interface for convenient power and charging.

Features

  • Single-Speed Drive Design: Ensures simple operation and high stability.
  • Wide Compatibility: Suitable for 5-20W small motors and 3V 20W+ LED beads.
  • Self-Locking Mechanical Switch: Press to activate, offering energy-efficient and easy control.
  • Type-C Interface: Supports fast charging and provides stable, secure connections.
  • Compact and Space-Saving: Facilitates easy integration into various DIY projects, especially flashlight modifications.

Specifications

ParameterValue
Product NameSingle-Speed Driver Board
Speed SettingsSingle-speed
Input VoltageDC 3.2-4.2V
Load Compatibility5-20W motors, 3V 20W+ LEDs
Compatible BatterySingle cell battery
Switch TypeLatching switch (mechanical switch)
InterfaceType-C port
Dimensions17.6mm x 17.6mm x 8mm (0.69in x 0.69in x 0.31in)
Quantity per package1 Module
Package TypeTQFP
Module TypeModule
OriginMainland China
ConditionNew

Setup and Installation

The YN-JWX-8-C driver board is designed for easy integration into DIY projects. Please follow the wiring diagrams carefully.

Component Overview

Top view of the Diymore Single-Speed Driver Board showing various components and labels like M+, B+, B-, KEY.
Figure 1: Top view of the Driver Board (YN-JWX-8-C) with component labels.

Wiring for Power and Load (LED/Motor)

Connect your battery and load (LED or motor) to the designated pads as shown below. Ensure correct polarity.

Wiring diagram for the driver board showing connections for LED+ (load positive), LED- (load negative), Battery+ (power positive), and Battery- (power negative).
Figure 2: Wiring diagram for battery and LED/Motor connections.
  • Battery + (B+): Connect the positive terminal of your single cell battery.
  • Battery - (B-): Connect the negative terminal of your single cell battery.
  • LED + (M+): Connect the positive terminal of your LED or motor.
  • LED - (M-): Connect the negative terminal of your LED or motor.

Wiring for Mechanical Switch

The board supports a self-locking mechanical switch. Connect the switch to the 'KEY' pads as illustrated.

Wiring diagram for the mechanical switch, indicating 'Connect mechanical switch +' and 'Connect mechanical switch -' pads on the board.
Figure 3: Wiring diagram for the mechanical switch.
  • Connect mechanical switch +: Connect one terminal of your mechanical switch here.
  • Connect mechanical switch -: Connect the other terminal of your mechanical switch here.

Type-C Interface

The board features a Type-C port for power input and charging. This interface provides stable and secure connections.

Angled view of the driver board highlighting the Type-C interface.
Figure 4: Type-C interface for power and charging.

Product Dimensions

Diagram showing the dimensions of the driver board: 17.5mm x 17.5mm x 8mm.
Figure 5: Dimensions of the Driver Board.

Operating Instructions

  1. Power On/Off: Use the connected mechanical switch to turn the device on or off. A single press will activate the circuit.
  2. Charging: Connect a Type-C cable to the board's Type-C port to charge the compatible single cell battery.
  3. Load Operation: Once powered on, the connected motor or LED will operate at a single speed/intensity.

Product Overview Video

Video 1: A brief overview and rotation of the Diymore Single-Speed Driver Board.

Maintenance

  • Keep the board clean and free from dust and moisture.
  • Avoid exposing the board to extreme temperatures or direct sunlight.
  • Ensure all connections are secure to prevent intermittent operation.
  • Do not attempt to modify the circuit board unless you are a qualified electronics technician.

Troubleshooting

  • Device not powering on:
    • Check battery voltage (must be within DC 3.2-4.2V).
    • Verify battery and load connections for correct polarity and secure contact.
    • Ensure the mechanical switch is properly connected and functioning.
  • Load (motor/LED) not operating as expected:
    • Confirm the load's power requirements are within the board's specifications (5-20W for motors, 3V 20W+ for LEDs).
    • Check for any short circuits or open circuits in the load wiring.
  • Charging issue:
    • Ensure the Type-C cable and power source are functional.
    • Check the Type-C port for any debris or damage.

User Tips

  • For DIY flashlight projects, the compact size of this board makes it easy to integrate into small enclosures.
  • Always double-check wiring before applying power to prevent damage to the board or connected components.

Support

For further assistance or technical support, please refer to the seller's store or contact their customer service. A PDF user manual is also available for download from the product page: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.