1. Introduction
This manual provides detailed instructions for the safe and effective use of your FREDORCH F10 Automatic Sex Machine. Please read this manual thoroughly before operating the device and retain it for future reference. The FREDORCH F10 machine is designed for adult use, offering adjustable angles, speed, and telescopic distance for a personalized experience. It is available in both Wireless and Wireless APP control versions.
Product Features:
- 360° adjustable angle for use
- Height adjustable
- 70W turbo gear motor for compact appearance and quiet operation
- Super suction cups and solid rod for enhanced stability
- 9 holes for adjusting telescopic distance
- Wireless control (all versions)
- APP control (Wireless APP version only)
- 18+ frequency conversion functions
2. Setup Instructions
Follow these steps to assemble your FREDORCH F10 Automatic Sex Machine:
2.1. Installation of Support
- Take out all accessories and screws as shown in the figure.
- Take out the polished rod with suction cup. Align the screw at the fixed hole of the aluminum connecting rod with the screw column and manually press it on the polished rod.
- Take out the other polished rod with a screw hole at one end and screw it into the screw manually.
- Take out the hexagon wrench and fastening screw. The installation steps for the other side of the support are the same as above.
- As shown in the figure, the machine support has been installed. Installation is complete.
2.2. Installation of Fuselage and Support
- Take out the fuselage and open the power clamp handle. As shown in the figure, align the two strong clamping holes of the fuselage in parallel with the strip support polished rod.
- Insert the strong clamping into the polished rod.
- After the installation of the fuselage, manually press the strong clamp handle to ensure the stability of the fuselage.
2.3. Power Supply and Accessories Connection
- Connect the power jack.
- Ensure the elastic screw is properly adjusted for desired stroke length.
- Install the desired accessory and connect the connector into the socket. All accessories are installed in the same way.
Note: The F10 machine comes in Wireless and Wireless APP versions. The Wireless APP version includes an additional spare speed controller on the machine and supports APP control.
3. Operating Instructions
3.1. Remote Control Operation
The remote control allows for easy adjustment of the machine's functions:
- Power on/off: Press the power button.
- Accelerator: Long press the acceleration button (S+).
- Deceleration key: Press the deceleration button (S-).
- Start/Stop: Click the play button in the center to start or stop.
- Front and rear adjustment modes: Use M+ and M- buttons.
- Mode key: This product has 18 different frequency adjustable modes. For the first use, it is recommended to start with the normal mode and gradually adapt. Use variable frequency mode for diverse experiences.
- Fast Switching: Use numerical buttons (1-20) for quick mode changes.
Tips: The effective distance of this remote control is within 15 meters. This product is not waterproof; please do not wade.
3.2. Angle Adjustment
The angle of the machine can be adjusted arbitrarily according to your posture requirements. When adjusting, simply pull the strong clamp handle to set the desired angle.
3.3. APP Control (Wireless APP Version Only)
For the Wireless APP version, you can control the machine via a dedicated application on your smartphone. The black control interface shown in the product images is the APP interface, not a physical remote control. Refer to the APP's instructions for pairing and control functions.
3.4. Product Demonstration Video
4. Maintenance
4.1. Lubrication
The machine adopts a double guide rail design. It is recommended to apply lubricating oil to the slide rail every 4-5 uses to ensure smooth operation and prolong the lifespan of the device. An arrow on the machine indicates the lubrication position.
4.2. Cleaning
- Always unplug the machine from the power source before cleaning.
- Clean the machine's main body with a soft, damp cloth. Do not immerse the machine in water.
- For accessories (dildos, etc.), clean thoroughly with warm water and a mild, toy-safe soap before and after each use. Rinse well and allow to air dry completely.
- Store the machine and accessories in a clean, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on | Power cable not connected properly; Power outlet not working; Remote control battery low. | Check power connections; Try a different outlet; Replace remote control batteries. |
| Remote control not responding | Out of range; Battery low; Obstruction between remote and machine. | Ensure you are within 15 meters of the machine; Replace remote control batteries; Remove any obstructions. |
| Machine operation is not smooth | Lack of lubrication on slide rails. | Apply lubricating oil to the slide rails as per maintenance instructions. |
| Difficulty adjusting angle/telescopic distance | Clamp handle not fully released or tightened. | Ensure the clamp handle is properly manipulated for adjustment and then securely tightened. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | FREDORCH |
| Model Number | F10 (also referred to as F6 in some listings) |
| Item Type | Vibrators |
| Material | Metal |
| Power Supply | Alternating Current (AC) |
| Input Voltage | 100-230V |
| Output Voltage | 24V |
| Motor Type | 70W Turbo Gear Motor, Continuous Duty |
| Speed | 0-300 strokes/min (infinitely variable) |
| Control Type | Remote Control / APP Control (depending on version) |
| Modes | 18+ frequency conversion functions |
| Telescopic Distance | 0-8CM adjustable |
| Angle Adjustable | -45 degrees to +90 degrees |
| Sound Level | 30 to 38 dB |
| Color | Black |
| Packing Weight | 6 KG |
| Certifications | 3C, CE |
| Origin | Mainland China |
6.1. Dimensions
- Overall Height (max): Approximately 33 cm (12.99 in)
- Overall Height (min): Approximately 32 cm (12.60 in)
- Base Width: Approximately 19.5 cm (7.67 in)
- Main Body Depth: Approximately 20 cm (7.87 in)
- Base Height: Approximately 26 cm (10.23 in)
- Stroke Adjustment Range: 10 cm (3.93 in)
7. Warranty and Support
For detailed warranty information and customer support, please refer to the official FREDORCH documentation. A comprehensive user manual in PDF format is available for download and review:
For further assistance, please contact FREDORCH customer service through their official channels.
8. User Tips
- Experiment with Angles: The 360° adjustable angle feature allows for a wide range of positions. Don't hesitate to experiment to find what works best for you.
- Start Slow: When using the machine for the first time, especially with the 18+ frequency modes, start with a lower speed and gradually increase to your comfort level.
- Regular Lubrication: To ensure longevity and smooth operation, remember to lubricate the slide rails every 4-5 uses as recommended.
- Secure Placement: Always ensure the machine's suction cups are firmly attached to a smooth, flat surface before use to prevent movement or tipping.