elough 4-in-1 USB2.0 Card Reader

Contents

Elough 4-in-1 USB Type C Card Reader

Instruction Manual

Introduction

Thank you for purchasing the Elough 4-in-1 USB Type C Card Reader. This device is designed to provide versatile and convenient data transfer between your memory cards and various devices. It supports SD and TF (Micro SD) cards and features both USB-A and USB Type-C connectors for broad compatibility.

Elough 4-in-1 USB Type C Card Reader with SD and TF card slots

Figure 1: Elough 4-in-1 USB Type C Card Reader with SD and TF card slots, showing USB-A and Type-C connectors.

Setup and Operation

This card reader is designed for plug-and-play functionality. No drivers are typically required for most operating systems.

  1. Compatibility: The card reader is compatible with computers and Android devices that support the OTG (On-The-Go) function for reading memory cards.
  2. Insert Memory Card: Gently insert your SD or TF (Micro SD) card into the corresponding slot on the card reader. Ensure the card is inserted in the correct direction until it clicks into place or is fully seated. The device features dual SD/TF card slots.
  3. Connect to Device:
    • For devices with a standard USB-A port (e.g., most computers, laptops), use the USB-A connector.
    • For devices with a USB Type-C port (e.g., newer laptops, smartphones, tablets), use the USB Type-C connector.
  4. Enable OTG (for Android devices): If connecting to an Android smartphone or tablet, ensure that the OTG function is enabled in your device's settings. This setting is usually found under 'Connected devices', 'USB', or 'Storage'.
  5. Data Management: Once connected, your device should recognize the card reader as an external storage device. You can then access, manage, and transfer files to and from the memory card using your device's file manager or photo gallery application.
  6. Safe Ejection: After completing your data transfer, it is recommended to safely eject the card reader from your device's operating system before physically removing it. This prevents data corruption. If re-connecting, simply reinsert the reader.
Card reader plugged into a laptop, showing dual SD/TF card slots

Figure 2: The card reader features dual SD/TF card slots for convenience.

Two card readers (black and white) side-by-side, indicating wide compatibility and plug-and-play functionality

Figure 3: The card reader offers wide compatibility and plug-and-play operation.

Card reader connected to a smartphone on a stand, demonstrating mobile card reading

Figure 4: Convenient for mobile card reading and sharing photos on social media.

Maintenance and Care

  • Protection: The card reader is equipped with a dust cap to protect its interfaces. Always use the dust cap when the reader is not in use to extend its service life.
  • Handling: Do not forcefully insert or remove memory cards or the card reader from devices. Gentle handling will prevent damage to the connectors and card slots.
  • Environment: Avoid exposing the card reader to high temperatures, excessive humidity, or strong magnetic fields, as these can damage the device and potentially corrupt data.
Close-up of the card reader's clear dust cap, highlighting its protective design

Figure 5: The dust cap provides intimate design for interface protection and extended service life.

Troubleshooting

If you encounter issues with your card reader, please try the following steps:

  • Device Not Recognized:
    • Ensure the card reader is fully inserted into the USB port of your computer or mobile device.
    • Try connecting the card reader to a different USB port on your device.
    • If using an Android device, verify that the OTG function is enabled in your device's settings.
    • Test the card reader on a different computer or mobile device to rule out issues with the host device.
  • Memory Card Not Reading:
    • Ensure the memory card is correctly and fully inserted into the card reader's slot.
    • Try using a different memory card to determine if the issue is with the card itself.
    • Check if the memory card is locked (some SD cards have a physical write-protect switch).
  • Data Transfer Issues:
    • Ensure the memory card is not full.
    • Avoid disconnecting the card reader during data transfer to prevent corruption.
    • The card reader features a Smart MCU with short-circuit protection for safer data transfer. If issues persist, ensure proper connection.
Card reader connected to a laptop, illustrating safer data transfer with smart MCU protection

Figure 6: Smart MCU with short-circuit protection ensures safer data transfer.

Specifications

Feature Description
Brand Name elough
Model Number 4-in-1 USB2.0 Card Reader
Type Read Card
Connector A USB A
Connector B Type-C
Card Slots SD, TF (Micro SD)
Origin Mainland China
Amplifier No
Input Voltage -
Output Voltage -
High-concerned chemical None
Package Length 17 cm
Package Width 15 cm
Package Height 1 cm
Package Weight 0.015 kg

User Tips

  • Always ensure your Android device's OTG function is enabled if you are using the card reader with your phone or tablet.
  • For best performance and to prevent data loss, always safely eject the card reader from your operating system before unplugging it.
  • Keep the dust caps on the connectors when not in use to protect them from debris and extend the life of the device.

Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer or the platform where you purchased this product. For further assistance or detailed inquiries, please contact the seller directly.

A PDF user manual may also be available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.