1. Introduction
This manual provides essential information for the safe and effective use of your YuXi Multi-Slot Battery Holder. This product is designed to provide a convenient power source for various electronic devices, featuring multiple battery slot configurations (AA, AAA, 18650) with a USB output, terminal line, protective cover, and an integrated power switch. Please read all instructions carefully before use.
2. Safety Information and Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
- Ensure correct battery polarity when inserting batteries. Incorrect insertion can damage the device or batteries.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the device will not be used for an extended period.
3. Product Overview
The YuXi Battery Holder provides a versatile solution for powering devices via USB. It comes in various configurations to accommodate different battery types and quantities, including AA, AAA, and 18650 cells. Each holder features a USB plug for output, a terminal line for connections, a protective cover, and a power switch for easy control.

Figure 1: Overview of different YuXi battery holder configurations with USB plugs and power switches.

Figure 2: A 2x18650 battery holder shown alongside other AA/AAA configurations.

Figure 3: Close-up of various battery holders featuring a USB 2.0 plug.
4. Setup Instructions
4.1 Before First Use
- Remove all protective films or packaging materials from the device.
- Open the battery compartment cover.
- Insert the appropriate batteries (AA, AAA, or 18650) into their respective slots, ensuring correct polarity (+ and - terminals match the markings inside the holder).
- Close the battery compartment cover securely.

Figure 4: Example of an AA 2-slot battery holder with the cover open, ready for battery insertion.

Figure 5: Example of an AAA 2-slot battery holder with the cover open, ready for battery insertion.
5. Operating Instructions
5.1 Operation
- After inserting batteries, connect the USB plug of the battery holder to the device you wish to power.
- Locate the power switch on the battery holder. Slide the switch to the 'ON' position to supply power to the connected device.
- To turn off the power, slide the switch to the 'OFF' position.
- If using the terminal line for custom connections, ensure proper wiring and insulation to prevent short circuits. Do not exceed the rated voltage or power of the connected device to avoid burnout or failure.

Figure 6: Detail of the USB 2.0 plug for connecting to devices.
6. Maintenance
6.1 After Use
- Turn off the device using the power switch.
- Disconnect the battery holder from the powered device.
- If not in use for an extended period, remove the batteries from the holder to prevent leakage and damage.
- Store the battery holder in a dry place, away from direct sunlight and extreme temperatures. Keep away from children.
- Clean the exterior of the battery holder with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
7. Troubleshooting
- Device not powering on:
- Ensure batteries are inserted correctly with the right polarity.
- Check if the batteries are fully charged or have sufficient power.
- Verify the power switch is in the 'ON' position.
- Ensure the USB connection to your device is secure.
- Inspect the battery holder for any visible damage or loose connections.
- Intermittent power:
- Check for loose battery connections within the holder.
- Ensure the USB cable is not damaged and is firmly connected.
- Overheating:
- Immediately disconnect the power source.
- Ensure you are using the correct type and number of batteries for the holder.
- Do not exceed the rated voltage or current draw of the connected device.
8. Specifications
| Brand Name | YuXi |
| Model Number | AA AAA 18650 Battery Box Specific models: 914095450976, 914164482348, 914669573204, 914657261294, 914628853683, 914128362564 |
| Type | Battery Storage Box / Battery Holder |
| Origin | Mainland China |
| Supported Battery Types | AA, AAA, 18650 (2, 3, or 4 slots depending on model) |
| Output Interface | USB Plug (USB 2.0) |
| Features | Terminal Line, Protective Cover, Power Switch |
| Package | No (Product is typically shipped without additional retail packaging) |
| Approximate Package Dimensions | Length: 17 cm, Width: 15 cm, Height: 3 cm |
| Approximate Package Weight | 0.037 kg |
A detailed user manual in PDF format is available for download: YuXi Battery Holder User Manual (PDF)
9. User Tips
- This battery holder is excellent for powering LED lights, especially light curtains, via USB.
- It can be used to operate servo tests or other small electronic projects requiring up to 6V.
- Consider using it to create a mini power bank for low-power devices without significant investment.
- The product is generally well-regarded for its functionality and build quality, offering good value.
10. Compliance Information
For battery compartments/battery cases, compliance relating to electrical safety, insulation, flammability, and environmental standards is required. Conformity marking (e.g., CE) and related documentation may be applicable.
11. Manufacturer and EU Representative Contact Information
Manufacturer:
Company Name: Shenzhen Michael Electronics Technology Co., Ltd.
Full Address: 6th Floor, No.101 Longxing South Road, Shaxi Town, Zhongshan City, Guangdong, China
Email: 872822306@qq.com
Telephone: +86-13652335425
EU Authorized Representative:
Company Name: SUCCESS COURIER SL
Full Address: CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA3, Fuenlabrada, Madrid, 28947 SPAIN
Email: successservice2@hotmail.com
Telephone: +34910602659