1. Product Overview
The NJTY SZ-09 is a digital angle finder designed to measure the inclination angle of any surface relative to the horizontal plane. This versatile instrument can replace traditional bubble levels and is ideal for various applications including road engineering, mechanical measurement, industrial platform leveling, and antenna positioning. It can be used as a standalone tool or integrated into other measuring instruments and equipment.
Figure 1: NJTY SZ-09 Digital Laser Angle Gauge with highlighted features.
Key Features:
- Easy to use with accurate measurements.
- Direct display of inclination on screen.
- Low battery voltage reminder.
- Freely settable alarm angle.
- Analog bars on screen to assist in indicating equilibrium.
- Screen display flips synchronously for easy reading in any orientation.
- Independent laser switch for energy saving and flexibility.
- Strong magnetic base for secure attachment to metal surfaces.
- Dual-side laser lines (transverse and vertical) for precise marking.
- USB Type-C rechargeable with a 400 mAh battery.
2. Setup and Controls
Package Contents:
- NJTY SZ-09 Digital Laser Angle Gauge
- USB Type-C Charging Cable
- Instruction Manual (this document, also available as PDF: View PDF)
Figure 2: Packaging contents.
Device Layout and Buttons:
Familiarize yourself with the device's buttons and display indicators:
| Button/Indicator | Function |
|---|---|
Power Button ( ) |
Long press to turn the device ON/OFF. |
HOLD Button ( ) |
Long press: Lock/unlock the current displayed angle value. Short press: Turn backlight ON/OFF. |
ALARM Button ( ) |
Short press: Turn the LEFT laser line ON/OFF. Long press: Enter alarm angle setting mode. Use HOLD and REL buttons to adjust the value, then short press ALARM to save and exit. An alarm will sound when the set angle is reached. |
REL Button ( ) |
Short press: Turn the RIGHT laser line ON/OFF. Long press: Enter relative measurement mode (sets current surface as 0° reference). |
| Display Area | Shows current angle, battery status, HOLD/REL/ALARM icons, laser indicator, and analog bars. |
3. Operating Instructions
3.1 Powering On/Off
- To Turn On: Long press the Power Button for approximately 2 seconds. The device will power on and enter normal measurement mode.
- To Turn Off: Long press the Power Button for approximately 2 seconds. The device will power off.
3.2 Angle Measurement (Absolute Mode)
- Turn on the device.
- Place the reference surface (bottom) of the angle gauge firmly against the surface you wish to measure.
- Wait for the reading on the display to stabilize.
- Read the tilt angle directly from the screen. The screen automatically flips for easy reading in any orientation.
Figure 3: Automatic display flipping for easy reading.
3.3 Relative Measurement Mode
This mode allows you to measure the angle difference between two surfaces.
- Place the angle gauge on the first surface that you want to set as your 0° reference.
- Long press the REL Button. You will hear a
)
)
)
)