EARMOR M32 SE

Contents

EARMOR M32 SE Tactical Headset User Manual

Model: M32 SE (YHKEMA)

1. Introduction

The EARMOR M32 SE is a tactical communication headset designed to provide hearing protection and clear communication in noisy environments. It features active noise reduction, a detachable microphone, and compatibility with PTT systems and helmet rail adapters.

Package Contents

  • EARMOR M32 SE Tactical Headset
  • PTT Cable (U-174 to NATO standard)
  • Helmet Rail Adapters (for Wendy M-LOK ARC Helmet)
  • User Manual (PDF available online)
EARMOR M32 SE Tactical Headset with PTT cable and helmet adapters
Figure 1: EARMOR M32 SE Headset, PTT cable, and helmet rail adapters.

2. Safety & Warnings

  • Do not use in water environments such as swimming or diving. While the headphones are splash-proof, they cannot be soaked.
  • Avoid using in extreme high temperatures (>60°C) or low temperatures (<-20°C) to prevent damage to the battery and noise reduction module.
  • When used in shooting scenarios, it is recommended to use with spare ear pads to further enhance hearing protection.
  • Children must use this device under adult supervision to prevent accidental touching of the power button or pulling of cables.

3. Setup

3.1 Battery Installation

The headset requires 2 AAA batteries (alkaline batteries are recommended for extended life).

  1. Ensure the headset is turned off.
  2. Locate the battery compartment. Hold the anti-lost ring of the battery cover and pull it out to open the compartment.
  3. Remove any old batteries.
  4. Insert 2 new 1.5V AAA batteries, observing the correct polarity (+/-).
  5. Fasten the battery cover tightly, ensuring the anti-lost ring is reset to prevent the cover from falling off.

3.2 Helmet Attachment (Optional)

The M32 SE headset can be mounted onto helmets equipped with M-LOK ARC rails using the provided adapters. The assembly process can be intricate.

EARMOR M32 SE Headset mounted on a helmet rail
Figure 2: Headset attached to a helmet rail.

3.3 PTT Cable Connection

To enable the call function, connect the U-174 cable to NATO standard PTT equipment. It is recommended to use EARMOR M51 or M52 PTT units for optimal performance.

4. Operating Instructions

4.1 Power On/Off

  • Power On: Press and hold the power button for 3 seconds. The headset indicator light will illuminate, and the noise reduction function will automatically activate.
  • Power Off: Press and hold the power button for 3 seconds. The indicator light will turn off, and the device will cease operation.

4.2 Noise Reduction Function

Once powered on, the active noise reduction mode automatically engages. This feature suppresses impact noise above 82dB (e.g., gunfire, blasting) in real-time, while simultaneously retaining ambient sounds like human voices and command signals. This ensures auditory perception and safety in tactical environments.

Person using EARMOR M32 SE headset for shooting, demonstrating noise suppression
Figure 3: The M32 SE headset provides hearing protection in loud environments.

4.3 Ambient Tone Adjustment

A short press of the power button allows you to cycle through five stages of ambient sound gain. This feature adapts the headset's sound perception to different scenarios, such as tactical training or outdoor operations, optimizing your awareness of surroundings.

4.4 Using the Call Function

After connecting the PTT cable (as described in Section 3.3), press the PTT button to initiate two-way calls. The dynamic voice tracking technology will automatically optimize microphone pickup for improved call clarity.

5. Maintenance

  • Keep the headset clean and dry. Wipe with a soft, damp cloth if necessary.
  • Avoid exposing the headset to direct sunlight or extreme temperatures for prolonged periods.
  • Regularly check ear pads for wear and tear. Replace them if damaged to maintain optimal hearing protection and comfort.
  • Remove batteries if the headset will not be used for an extended period to prevent leakage.

6. Troubleshooting

ProblemPossible CauseSolution
Headset does not power on.Dead or incorrectly inserted batteries.Replace batteries with new AAA batteries, ensuring correct polarity.
Poor noise reduction performance.Ear pads not sealing properly; extreme environmental noise.Adjust headset for a snug fit. Ensure ear pads are not worn out. Consider using spare ear pads in very loud environments.
Call function not working.PTT cable not connected or faulty; incompatible PTT unit.Ensure PTT cable is securely connected to both headset and radio. Verify PTT unit compatibility (NATO standard).
Ambient sound too loud/quiet.Ambient tone adjustment setting.Short press the power button to cycle through the five-stage ambient sound gain gears.

7. Specifications

FeatureDetail
Product TypeTactical Headset (Earmuff)
ModelM32 SE (YHKEMA)
Noise SuppressionSuppresses impact noise above 82dB
Battery Type2 x AAA 1.5V (Alkaline recommended)
OriginMainland China
Package Dimensions (L x W x H)17 cm x 15 cm x 14 cm
Package Weight0.452 kg

8. User Tips

  • Helmet Mounting: While compatible with Wendy 3.0 helmets and M-LOK ARC rails, the assembly process for helmet attachment can be complex. Take your time and follow instructions carefully.
  • Effective Noise Dampening: Users report excellent noise dampening, particularly for gunshots, making them highly effective for shooting activities.
  • Comfort: The headset is designed for comfort, ensuring a good fit during extended use.

9. Manufacturer & Support

For further information or support, please refer to the official user manual PDF or contact the manufacturer/representative:

  • Manufacturer: Shenzhen Yanhao Trade Co., Ltd.
  • EU Authorized Representative: SUCCESS COURIER SL
  • Address: CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
  • E-mail: successservice2@hotmail.com
  • Tel: +34910602659

A digital version of this manual is available: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.