hiwheel For Xiaomi 5/5PRO/5MAX

Contents

E-Scooter Controller Kit User Manual

Model: For Xiaomi 5/5PRO/5MAX | Brand: Hiwheel

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new E-Scooter Controller Kit. This kit is designed to upgrade and enhance the performance of Xiaomi 5, 5 Pro, and 5 Max electric scooters, offering features like speed unlock and motor self-learning capabilities. Please read this manual carefully before installation and use to ensure correct operation and safety.

Safety Warnings

  • Always ensure the scooter is powered off before performing any installation or maintenance.
  • Disconnect the battery before working on electrical components.
  • If you are unfamiliar with electrical wiring or scooter mechanics, seek professional assistance.
  • Ensure all connections are secure and correctly matched to prevent damage to the controller or scooter.
  • After installation, always perform a test run in a safe, open area to verify proper function before regular use.
  • Modifying your scooter may affect its warranty or compliance with local regulations. Check local laws regarding scooter modifications and speed limits.

Package Contents

The E-Scooter Controller Kit typically includes the following components:

  • Main Controller Unit
  • Display Unit
  • Various Adapter Cables (for different interfaces)
  • Turn Signal Module (if included in your specific kit)
  • Associated Wiring Harnesses
Overview of E-Scooter Controller Kit components
Figure 1: Overview of the E-Scooter Controller Kit components, including the controller, display, wiring, and a Xiaomi scooter.

Specifications

Attribute Value
Brand Name hiwheel
Model Number For Xiaomi 5/5PRO/5MAX
Origin Mainland China
Current 24V-63V
Power 250-1200W
Voltage 7-25A
Speed mode Speed limit/no speed limit
Function Motor self-learning

Dimensions

Controller and Display Dimensions
Figure 2: Dimensions of the controller unit (8.6cm L x 2.9cm H x 6cm W) and the display unit (7.7cm L x 3.1cm W, line length 26.3cm, connector diameter 0.7cm).

Setup and Installation

Attention: The product is equipped with multiple adapter cables. If there are different interfaces on your scooter, you can choose the corresponding adapter cable for connection. Ensure all cable sequence colors are connected correctly for proper functionality. This system is designed for convenient, simple, and plug-and-play installation.

Wiring Diagram

Carefully follow the wiring diagram below to connect the controller kit to your scooter. Pay close attention to each labeled interface.

Controller Wiring Diagram
Figure 3: Detailed wiring diagram for the controller, showing connections for Motor Phase Line, Motor Hall Line, BMS Signal Terminal Line, Communication Line, Tail Light Line, and Power Cord.

Display and Control Connections

The display unit connects to various controls on your scooter's handlebars. Note the differences in wiring for Xiaomi 5 Pro/Max versus Xiaomi 5 models.

Display Wiring for Xiaomi 5Pro/Max vs Xiaomi 5
Figure 4: Comparison of display wiring for Xiaomi 5Pro/Max and Xiaomi 5, highlighting Turn Signal Wire (5V), Brake Line (Red/Blue/Black), Accelerator Line (Red/Green/Black), Headlight Line, and Communication Line Interface.

Turn Signal Module Installation

If your kit includes a turn signal module, connect it as shown in the diagram. The input terminal connects to the 5V output power supply of the display screen.

Turn Signal Module Diagram
Figure 5: Diagram of the Turn Signal Module, showing Turn Signal Wire, Signal Switch Line, and Input Terminal.

Communication Line Interface

A dedicated communication line interface cable is provided for connecting the display to the controller.

Communication Line Interface Cable
Figure 6: Close-up of the communication line interface cable.

Operating Instructions

Motor Self-Learning Calibration

This procedure calibrates the motor for optimal performance. It is crucial for correct motor operation after installation.

  1. Ensure the scooter is powered off and the motor wheel is suspended freely (not touching the ground).
  2. Press and hold the power button for 10 seconds. The buzzer will emit a beep during the first second, and the display screen will light up.
  3. When the buzzer emits a beep, beep, or beep, self-learning begins. The motor will automatically rotate forward and backward for approximately 80 seconds.
  4. A final three-beep signal indicates completion.

To Correct Motor Direction: If the motor rotates in reverse after self-learning, swap the two motor phase wires (yellow and blue). Then, repeat the self-learning procedure from step 1.

Video 1: Demonstration of Motor Self-Learning Calibration and how to correct motor direction by swapping phase wires.

Manual Switching Between Speed Limit and No Speed Limit

The controller allows you to switch between speed-limited and unlimited modes:

  • Switching from speed limit to no speed limit: Press the brake + power button (long press, short press, 1-N times) to release the brake.
  • Switching from no speed limit to speed limit: Press the brake + power button (long press, short press, 1-N times) to release the brake.

App Control and Settings

The controller supports an exclusive app for advanced settings and 3-level power matching. The app allows you to customize various parameters such as cruise control, speed limits, battery numbers, and power limits to match your riding style.

Exclusive App Interface for Power Matching
Figure 7: Screenshot of the exclusive app interface for 3-Level Power Matching, showing various customizable settings.

The name of the app or a QR code to download it may be found in the product packaging.

Maintenance

  • Regularly check all electrical connections for tightness and signs of wear.
  • Keep the controller and display units clean and dry. Avoid exposure to excessive moisture or extreme temperatures.
  • Inspect wiring for any damage or fraying and replace if necessary.
  • Ensure the scooter's battery is properly maintained according to the scooter manufacturer's guidelines.

Troubleshooting

Common Issues and Solutions:

  • Motor not rotating or rotating incorrectly:
    • Ensure all motor phase wires (yellow, green, blue) are securely connected.
    • Perform the Motor Self-Learning Calibration as described in the 'Operating Instructions' section.
    • If the motor rotates in reverse, swap the yellow and blue motor phase wires and repeat self-learning.
  • Display not working or showing incorrect information:
    • Check the communication line interface cable for secure connection.
    • Verify that the display connectors match your specific scooter model (Xiaomi 5, 5 Pro, or 5 Max).
  • Turn signals not blinking correctly:
    • Ensure the Turn Signal Module is correctly wired and receiving 5V power from the display.
    • If turn signals stop blinking after activation, try restarting the scooter.
  • Scooter not reaching expected top speed:
    • Verify that the speed limit mode is correctly set to 'no speed limit' using the manual switching method or the app.
    • Check app settings for any power or speed limit configurations.
    • Ensure the battery is fully charged and in good condition.
  • General malfunction or unexpected shutdown:
    • Recheck all wiring connections for any loose or incorrect installations.
    • Ensure the controller unit is properly installed and not overheating.
    • If issues persist, consult the seller or a qualified technician.

User Tips

  • Patience is Key: Installation can be complex, especially if you're new to scooter modifications. Take your time and follow all diagrams carefully.
  • Seek Assistance if Needed: If you lack experience with electric scooter modifications, consider seeking help from someone with technical know-how or contacting the seller for guidance.
  • App for Fine-Tuning: Utilize the exclusive app for advanced customization of speed, power, and other settings to optimize your riding experience. Look for a QR code in the packaging to download the app.
  • Local Regulations: Be aware that increasing your scooter's speed may impact its legality in your region. Always check local laws and regulations.

Frequently Asked Questions (FAQ)

Q: Is this kit compatible with Xiaomi 5 Pro/Max?
A: Yes, the kit is designed for Xiaomi 5 Pro and 5 Max electric scooters. Ensure you use the correct adapter cables for your specific model.
Q: Does this also work with the Xiaomi 5?
A: Yes, the kit is compatible with the Xiaomi 5. Refer to the wiring diagrams for specific connections for the Xiaomi 5 model.
Q: What is the top speed of the Xiaomi 5 Pro on the road with this kit?
A: The kit is advertised to unlock speeds up to 55 km/h. Actual top speed may vary based on scooter condition, battery charge, rider weight, and terrain. Some users report speeds of 40-43 km/h for the Xiaomi 5 Max.
Q: What is the name of the app for tuning with the controller?
A: The app name is not explicitly provided in the product details, but it is often found via a QR code included in the product packaging.
Q: Does the module have a zero-start function (scooter starts without push-start)?
A: This feature is typically configurable via the exclusive app. Check the app settings for a 'zero-start' or similar option.
Q: Can this kit be applied to the Xiaomi 5 Plus Scooter?
A: The product description specifically mentions Xiaomi 5, 5 Pro, and 5 Max. Compatibility with other models like the 5 Plus or 6 Ultra is not guaranteed and should be verified with the seller.

Support

For further assistance, technical support, or specific inquiries not covered in this manual, please contact the seller directly. You may also refer to the official user manual PDF for additional details:

View User Manual (PDF)

You can also consult about any electric scooter or E-bike related issues with the seller via:

  • WhatsApp: 008613425108591
  • WeChat: MXYG1688
  • Facebook: 008613425108591
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.