1. Introduction
Thank you for choosing the TESSAN PD 65W Fast Charging Power Strip. This 6-in-1 charging station is designed to provide convenient and efficient power delivery for a variety of electronic devices, featuring AC outlets, USB-A ports, and USB-C ports with fast charging capabilities and built-in safety protections. Please read this manual carefully before use to ensure safe and optimal performance.
2. Safety Information
- Do not exceed the maximum rated power of 4000W or maximum current of 16A.
- Do not disassemble, repair, or modify the product.
- Keep away from water, moisture, and high temperatures.
- Do not use in wet environments or outdoors.
- Ensure the power strip is placed on a stable surface.
- Keep out of reach of children.
- If the product is damaged, stop using it immediately and contact customer support.
- This product is designed for indoor use only.
For detailed safety warnings in multiple languages, please refer to the official user manual PDF available from the manufacturer.
3. Product Overview
The TESSAN PD 65W Fast Charging Power Strip is a compact and versatile charging solution. It includes:
- 2 AC Outlets (EU Plug type)
- 2 USB-A Ports
- 2 USB-C Ports
- 1 Master On/Off Switch (controls AC outlets only)
- 1.5m Extension Cable
- Anti-slip mat on the base
4. Setup
- Unpack: Carefully remove the power strip from its packaging.
- Placement: Place the power strip on a flat, stable, and dry surface. The integrated anti-slip mat helps keep it securely in place.
- Connect to Power: Plug the power strip's EU plug into a grounded wall outlet.
- Power On: Press the master On/Off switch to activate the AC outlets. The USB ports are typically always active when the unit is plugged in.
5. Operating Instructions
5.1 Using AC Outlets
- Plug your devices into the two AC outlets.
- Ensure the total power consumption of all connected AC devices does not exceed 4000W.
- The master switch controls the power to these AC outlets.
5.2 Using USB Ports
The power strip features 2 USB-C ports (C1, C2) and 2 USB-A ports (A1, A2) for charging various devices.
- USB-C1/C2: Each port supports up to 65W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A) for fast charging compatible phones, tablets, and laptops.
- USB-A1: Supports up to 60W (5V/3A, 9V/3A, 12V/3A, 20V/3A) for fast charging compatible devices.
- USB-A2: Supports up to 5W (5V/1A) for standard charging.
Note on Power Distribution: The total output for all USB ports combined is 65W. When multiple USB ports are in use, the power output will be dynamically distributed among the connected devices. For detailed power distribution scenarios (e.g., C1+C2+A1+A2, C1+C2, etc.), please refer to the comprehensive diagrams in the official user manual PDF.
6. Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or sprays.
- Storage: When not in use for extended periods, unplug the power strip and store it in a cool, dry place away from direct sunlight.
- Inspection: Periodically check the power cord and the unit for any signs of damage.
7. Troubleshooting
- No Power: Ensure the power strip is securely plugged into a working wall outlet and the master switch is turned ON. Check if the wall outlet itself is functioning.
- Device Not Charging: Verify that your device's charging cable is properly connected to both the power strip and your device. Ensure your device is compatible with the charging port used.
- Slow Charging: If multiple devices are connected to the USB ports, the power output may be shared, resulting in slower charging for individual devices. Disconnect some devices or use a higher-wattage port if available. Ensure your cable supports fast charging.
- Overload Protection Triggered: If the power strip stops working, it might be due to an overload. Unplug all devices, wait a few minutes, and then plug them back in one by one, ensuring not to exceed the maximum rated power.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | GM-HS550A-EU-BK |
| Rated Voltage | 250V |
| Rated Current | 16A |
| Rated Power | 4000W |
| Input | 100-240V, 50/60Hz, 1.5A MAX |
| USB-C1/C2 Output | 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A (65W Max per port) |
| USB-A1 Output | 5V/3A, 9V/3A, 12V/3A, 20V/3A (60W Max) |
| USB-A2 Output | 5V/1A (5W Max) |
| USB Total Output | 65W |
| AC Outlets Number | 2 |
| USB Ports Number | 4 (2 USB-A, 2 USB-C) |
| Extension Cable Length | 1.5m |
| Surge Protector | Yes |
| Overload Protection | Yes |
| Plug Type | EU |
| Dimensions (L×W×H) | 11.7 × 8.96 × 4.05 cm |
| Certification | RoHs, CE |
9. Warranty and Support
TESSAN products are manufactured to high-quality standards. For warranty information and technical support, please contact the retailer or visit the official TESSAN website. Keep your purchase receipt as proof of purchase.
A detailed user manual (PDF) is available for download, which includes comprehensive specifications and warnings in multiple languages (English, German, French, Spanish, Italian, Polish). You can find this document at: TESSAN User Manual (PDF)
10. User Tips
- Reduce Cable Clutter: Utilize the compact design and multiple ports to consolidate your charging setup and keep your desktop tidy.
Figure 6: The TESSAN power strip helps reduce cable clutter compared to traditional setups. - Optimal Placement: The 1.5m extension cable provides flexibility for placing the power strip conveniently on a desk, bedside table, or in an office environment.
- Check Device Compatibility: For optimal fast charging, ensure your devices and cables support the Power Delivery (PD) standard and the wattage provided by the USB-C and USB-A1 ports.
- Utilize Anti-Slip Mat: The built-in anti-slip mat ensures the power strip stays securely in place, preventing accidental movement.