1. Introduction
Welcome to the NITECORE NB10000 Gen4 User Manual. This ultra-lightweight, high-performance power bank is designed for outdoor enthusiasts, offering reliable power on the go. Featuring a 10000mAh capacity, 22.5W fast charging, and IPX7 waterproof rating, it's built to withstand harsh weather conditions. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Safety Information
- Do not disassemble, modify, or attempt to repair the device.
- Do not expose the device to fire, extreme temperatures (above 45°C or below -10°C), or direct sunlight for prolonged periods.
- Avoid exposing the device to water beyond its IPX7 rating. If it gets wet, dry it thoroughly before next use.
- Keep the device away from children.
- Use only NITECORE recommended accessories.
- Do not use the device if it is damaged or shows signs of leakage.
- Recycle the device according to local regulations.
3. Package Contents
The NITECORE NB10000 Gen4 package includes the following items:
- NITECORE NB10000 Gen4 Power Bank
- Lanyard
- USB-C Charging Cable

4. Product Overview
The NB10000 Gen4 is an ultra-lightweight power bank featuring a carbon fiber frame, 10000mAh capacity, and 22.5W fast charging. It is designed for durability and efficiency in various outdoor conditions.
Key Features:
- Ultra-lightweight Design: Weighs only 143g (5 oz), making it 36% lighter than standard 10,000mAh power banks. Features dual-sided carbon fiber sheets and a reinforced flame-retardant composite frame for an ultra-lightweight yet solid structure.
- High Capacity & Fast Charging: 10,000mAh capacity with 22.5W fast charging via dual USB-C ports and a USB-A output. Supports multiple fast charging protocols including PD, QC3.0, and SCP.
- IPX7 Waterproof: Fearless of harsh weather, offering multiple layers of protection both inside and out. Note: Not designed for underwater use. Dry it thoroughly before use in case of accidental drops into water.
- 9V High-Voltage Platform: Utilizes high-density cells sourced from flagship smartphones, with an optimized circuit and enhanced conversion for efficient power delivery.
- Dynamic RGB Positioning Lights: Easy to spot at a glance, these lights indicate port location, charging status, and output mode.
- Knock to Wake Function: Double-knock the upper part of the power bank to wake up power indicators, making it ready for outdoor use and easy to operate even when wearing gloves or in cold environments.
- Advanced Protection: Equipped with a Microcontroller Unit (MCU) and Dual NTC Thermistors for intelligent thermal protection, overcurrent protection, short-circuit protection, over-discharge protection, overcharge protection, and overvoltage protection.
- Flight Companion: Complies with the UN38.3 Standard for portable power, making it a safe travel companion.



5. Specifications
| Feature | Description |
|---|---|
| Cell | Li-Ion |
| Capacity | 10,000mAh 3.9V (39Wh) |
| Rated Energy | 6,800mAh 5V (TYP 3A) / 7,200mAh 5V (TYP 1A) |
| Input (USB-C IN) | 5V⎓3A / 9V⎓2.22A / 12V⎓1.87A (22.5W MAX) |
| Output (USB-C OUT1 / OUT2) | 5V⎓3A / 9V⎓2.22A / 12V⎓1.87A (22.5W MAX) |
| Total Output | 5V⎓3A (15W MAX) |
| IP Rating | IPX7 |
| Weight (Accessory Not Included) | 143g±5g / 5 oz±0.1 oz |
| Dimensions | 128.8mm x 65.8mm x 14.5mm / 4.57" x 1.84" x 0.57" |
| Accessory | Lanyard Charging Cable |
Note: The product is not designed for underwater use. Please dry it thoroughly before use in case of accidental drops into water.

6. Setup
6.1 Initial Charging
Before first use, it is recommended to fully charge your NITECORE NB10000 Gen4 power bank.
- Connect the provided USB-C charging cable to the IN/OUT1 port on the power bank.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included).
- The RGB positioning lights will illuminate to indicate the charging status. The power bank is fully charged when all indicator lights are solid.

7. Operating Instructions
7.1 Power On/Off
- The power bank will automatically power on when a device is connected for charging.
- To check the battery level or activate the power indicators, double-knock the upper part of the power bank.
7.2 Charging Devices
- Connect your electronic device to either the USB-C (IN/OUT1) or USB-A (OUT2) port on the power bank using a compatible charging cable.
- The power bank will automatically begin charging your device. The RGB positioning lights will indicate the charging status.
- The NB10000 Gen4 supports 22.5W fast charging for compatible devices.


7.3 Pass-through Charging
The NB10000 Gen4 supports pass-through charging, allowing you to recharge the power bank and your device simultaneously. Connect the power bank to a power adapter and then connect your device to the power bank.
7.4 Mode Switching (Regular/Eco Mode)
The power bank features two output modes:
- Regular Mode: Provides 6,800mAh 5V (TYP 3A) rated energy for faster charging.
- Eco Mode: Provides 7,200mAh 5V (TYP 1A) rated energy for extended runtime.
To switch between modes, long press the Touch Button. This allows you to optimize power delivery based on your needs, whether for speed or longevity.

8. Maintenance
- Clean the exterior of the power bank with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight for extended periods.
- Store the power bank in a cool, dry place when not in use.
- If the power bank is dropped in water, ensure it is thoroughly dried before attempting to use it again.
9. Troubleshooting
9.1 Device Not Charging
- Ensure all cables are securely connected to both the power bank and the device.
- Check if the power bank has sufficient charge. Double-knock to check the indicator lights.
- Try using a different charging cable or a different port on the power bank.
9.2 Slow Charging
- Verify that your device and charging cable support fast charging.
- Check if the power bank is in Eco Mode. Long press the Touch Button to switch to Regular Mode for faster charging.
9.3 Power Bank Not Recharging
- Ensure the power adapter is functioning correctly and the USB-C cable is properly connected to the IN/OUT1 port.
- Try a different power adapter or USB-C cable.
9.4 Overheating
- The power bank has intelligent thermal protection. If it feels noticeably warm during use, disconnect it and allow it to cool down in a well-ventilated area.
- If overheating persists or becomes excessive, discontinue use and contact customer support.
10. User Tips
- The power bank's lightweight and narrow design make it ideal for carrying in a pocket alongside your phone.
- The RGB lighting on the ports is genuinely useful for locating ports and checking status in low-light conditions.
- Utilize the Eco Mode when you need to maximize the power bank's runtime and faster charging is not a priority.
- Always check the originality of your product using the QR code provided on the packaging.
11. Frequently Asked Questions (FAQ)
Q: Does this power bank have CCC certification for air travel?
A: Yes, the NITECORE NB10000 Gen4 has the necessary certification indicated on its case, making it suitable for hand luggage on flights.
12. Warranty and Support
The NITECORE NB10000 Gen4 comes with an 18-month free warranty and a 15-day free replacement policy. For detailed warranty terms, technical support, or service inquiries, please refer to the official NITECORE website or contact your retailer.

A detailed user manual (PDF) is available for download for further reference: User Manual (PDF)