1. Introduction
Thank you for choosing the ESSAGER Camera Infrared Detector. This compact and portable device is designed to help you detect hidden cameras and pinhole lenses in various environments, ensuring your privacy and security. Utilizing infrared detection technology, it allows for quick and easy scanning of your surroundings.

Figure 1: ESSAGER Camera Infrared Detector with Type-C interface.
Key features include:
- Infrared Detection: Identifies hidden camera lenses by reflecting infrared light.
- Plug and Play: No complex setup or battery required; powered directly via Type-C port.
- Portable Design: Small and lightweight for easy carrying during travel or outings.
- Wide Compatibility: Works with mobile phones, tablets, and power banks equipped with a Type-C port.
- Long-Distance Scanning: Effective detection up to 5 meters.
2. Safety Information
Please read and follow these safety guidelines to ensure proper operation and prevent damage to the device or injury:
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Keep the device away from water and other liquids.
- Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage.
- Use only with compatible Type-C power sources.
- Keep out of reach of children.
3. Package Contents
The package typically includes:
- 1 x ESSAGER Camera Infrared Detector (Model ETCT-DC01-P)
Please check all contents upon unboxing.
4. Setup
The ESSAGER Camera Infrared Detector is designed for plug-and-play convenience. No software installation or battery charging is required.
- Locate a device with a Type-C port that can supply power, such as a smartphone, tablet, or power bank.
- Plug the Type-C connector of the detector firmly into the Type-C port of your chosen power source.
- Upon successful connection, the four infrared LED lights on the detector will begin to blink, indicating that the device is powered on and ready for use.

Figure 2: The detector is compatible with various Type-C powered devices.
5. Operating Instructions
The detector works by emitting infrared light. When this light hits a camera lens, it reflects back, making the lens appear as a bright red dot when viewed through the detector's special optical lens.
- Ensure the detector is properly connected to a Type-C power source and its LEDs are blinking.
- Hold the detector close to your eye, looking through its optical lens.
- Slowly scan the area you wish to inspect. Move your head and the detector deliberately across walls, furniture, smoke detectors, air vents, mirrors, and any objects that could potentially conceal a camera.
- Look for bright red reflections or dots. These reflections indicate the presence of a camera lens.
- The device supports scanning from a distance of up to 5 meters, allowing you to inspect various corners and high-up areas.

Figure 3: Scanning a wall socket for hidden cameras.

Figure 4: Long-distance scanning capability up to 5 meters.
6. Maintenance
- To clean the device, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the optical lens free from dust and fingerprints for optimal performance.
- Store the detector in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
7. Troubleshooting
- Problem: The detector's LEDs do not light up or blink.
- Solution:
- Ensure the detector is fully inserted into the Type-C port.
- Try connecting the detector to a different Type-C port or another compatible device (e.g., a different phone or power bank) to rule out issues with the power source.
- Verify that the connected device is powered on and capable of supplying power via its Type-C port.
- Problem: I am not detecting any cameras, even in areas where I suspect they might be.
- Solution:
- Angle Sensitivity: The detector is sensitive to the angle. You need to be looking directly at the camera lens for the reflection to be visible. Slowly adjust your viewing angle and position.
- Thorough Scanning: Ensure you are scanning the area slowly and methodically, covering all potential hiding spots.
- Lighting Conditions: While the detector works in various lighting, sometimes reducing ambient light can make reflections more apparent.
- Problem: The blinking of the red lights is distracting.
- Solution: The blinking of the infrared LEDs is normal operation and indicates the device is powered and functioning. Users typically get accustomed to it with use.
8. Specifications
| Feature | Specification |
|---|---|
| Model | ETCT-DC01-P |
| Material | PC + ABS |
| Interface | Type-C |
| Detection Range | Up to 5 meters |
| Power Source | Type-C powered (from host device) |

Figure 5: Product details highlighting material and interface.
9. User Tips
- Optimal Angle: When scanning, ensure you are looking as squarely as possible at potential camera locations. The reflection from a lens is most visible when viewed head-on. Slight adjustments in your viewing angle can make a difference.
- Normal Blinking: The four red LED lights will blink continuously when the device is powered on. This is normal operation and indicates the infrared emitters are active.
- No App Needed: This device operates independently without the need for any dedicated mobile application. Simply plug it into a Type-C power source to begin detection.
10. Frequently Asked Questions (FAQ)
- Q: Are the 4 LED lights supposed to blink when it is plugged in to power supply?
- A: Yes, the blinking of the four infrared LED lights is normal. It indicates that the device is powered on and actively emitting infrared light for detection.
- Q: Is this detector compatible with iOS devices?
- A: The detector features a Type-C interface. It is compatible with any device that has a Type-C port and can supply power through it. While some newer iOS devices (like certain iPads and iPhones) now use Type-C, ensure your specific iOS device has a Type-C port and can provide power for accessories.
11. Warranty and Support
For warranty information and technical support, please refer to the seller or retailer from whom you purchased this product. Keep your proof of purchase for any warranty claims.