1. Introduction
The JDiag P100 Automotive Power Circuit Probe Kit is a versatile diagnostic tool designed for testing electrical systems in 12V and 24V vehicles. It allows for quick and accurate diagnosis of various electrical issues, including voltage, resistance, continuity, and component activation. This manual provides essential information for safe and effective operation of your device.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Electrical Safety: Ensure vehicle is turned off, in Park (P) gear, and with parking brake engaged before operation.
- Operational Safety: Do not move the vehicle or perform other repairs during diagnostics.
- Equipment Safety: Connect an external regulated power supply during programming/coding to prevent voltage fluctuations.
- Data Safety: Back up original data before any modification operations.
- Prohibited Uses: Strictly prohibited for illegal activities such as odometer tampering or accident data deletion.
- Permitted Uses: Limited to vehicle diagnostics, repairs, maintenance, and authorized programming/calibration.
- Liability: Users assume full responsibility for consequences of operation. Professional technicians are recommended to perform procedures.
3. Product Overview
The JDiag P100 is an automotive power circuit probe designed for comprehensive electrical system testing. It features a clear display, intuitive controls, and robust construction for professional use.

The kit typically includes the P100 main unit with a probe, a power cable with alligator clips, and a user manual. Available cable lengths include 2 meters and 10 meters, offering flexibility for various diagnostic needs.
4. Specifications
| Feature | Description |
|---|---|
| Model | JDiag P100 |
| Working Voltage | 12V - 24V DC |
| Hardware Version | JDiag P100 |
| Software Version | JDiag P100 |
| External Testing Certification | CE |
| Battery Included | No |
5. Setup
5.1 Device Connection Steps
- Step 1: Locate the vehicle's OBD port (typically under the driver's side dashboard).
- Step 2: Connect the diagnostic cable to the vehicle port.
- Step 3: Connect the diagnostic cable to the main unit.
- Step 4: Power the device (via cigarette lighter or built-in battery).
- Step 5: Turn the ignition switch to the ON position (without starting the engine).
- Step 6: Turn on the device power.
5.2 Power Supply Modes
The JDiag P100 can be powered using two convenient methods:
- Cigarette Lighter: Connect the device to the vehicle's cigarette lighter socket.
- Car Battery: Connect the device directly to the car battery terminals using the provided alligator clips.

6. Operating Instructions
6.1 Working Modes
The JDiag P100 offers multiple working modes for comprehensive diagnostics:

- DC Voltage: Measures direct current voltage.
- AC Voltage: Measures alternating current voltage, displaying Max, Min, Frequency (Freq), and Duty Cycle.
- Resistance: Measures electrical resistance.
- Diode: Tests diode functionality.
- Sound/Language: Allows adjustment of sound tone (on/off) and language settings.
6.2 Operating Procedure
- Step 1: Select Vehicle
Navigate through Brand → Model → Year → Engine Code. Tip: Use VIN code for automatic identification and greater accuracy. - Step 2: Automatic Scan
Click "Full System Scan" → Wait for scan completion → View diagnostic report. - Step 3: Diagnosis and Repair
Read fault codes → View data streams → Perform tests → Repair → Clear fault codes.
6.3 Scan Report Interpretation Guide
| System Status | Icon Color | Meaning | Recommended Action |
|---|---|---|---|
| Normal | Green | No fault codes | No action required |
| Current Fault | Red | Current fault present | Diagnose immediately |
| Historical Fault | Yellow | Past fault occurred | Inspect related components |
| Communication Failure | Black | Unable to connect to system | Check wiring/power supply |
6.4 Diagnostic Workflow
- Step 1: Initial Information Gathering
- Step 2: Fault Code Analysis
- Step 3: Data Stream Analysis (Critical Step)
- Step 4: Active Test Verification
- Step 5: Repair Verification
6.5 Wide Applications
The JDiag P100 is suitable for diagnosing electrical systems in a variety of 12V-24V vehicles:

- Cars
- Trucks
- Trailers
- Off-road Vehicles
- Motorcycles
6.6 Car Circuit Tester Functions
The P100 provides comprehensive electrical solutions:

- Voltage & Polarity Test
- Locating Short Circuits
- Finding Bad Grounds
- Circuit Signal Testing
- Continuity Testing
- Testing Trailer Lights
- Activation of Components
7. Maintenance
To ensure the longevity and optimal performance of your JDiag P100, follow these maintenance guidelines:
- Cleaning: Wipe the device with a soft, dry cloth after each use. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a clean, dry place away from direct sunlight, extreme temperatures, and corrosive materials.
- Cable Care: Avoid sharp bends or kinks in the cables. Store them neatly to prevent damage.
8. Troubleshooting
If you encounter issues with your JDiag P100, refer to the following common problems and solutions:
- Device Does Not Power On:
- Check power connections to the vehicle's cigarette lighter or battery terminals.
- Ensure the vehicle's ignition is in the ON position. - Communication Failure (Black Icon):
- Verify that the diagnostic cable is securely connected to both the vehicle's OBD port and the P100 unit.
- Inspect the vehicle's wiring and power supply to the OBD port. - Inaccurate Readings:
- Ensure the probe tip has good contact with the circuit being tested.
- Check for any damage to the probe or cables.
If problems persist, contact customer support for further assistance.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.