Car Antenna Shark Fin Decorative Aerial Antenna

Contents

Car Roof Shark Fin Decorative Aerial Antenna User Manual

1. Introduction

Thank you for choosing the Car Roof Shark Fin Decorative Aerial Antenna. This product serves as both a stylish decorative element for your vehicle and an enhancement for your AM/FM radio signal reception. Its sleek, modern design is compatible with various car models, including BMW, Honda, Toyota, and Mazda.

Shark Fin Antenna in various colors
The Car Roof Shark Fin Antenna, available in multiple colors.

2. Safety & Warnings

  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation guidelines to avoid injury or damage to your vehicle.
  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

3. Package Contents

Please check the package for the following items:

  • 1 x Car Shark Roof Signal Antenna
  • 1 x Adhesive Base
  • 1 x FM/AM Connection Cable

If any parts are missing or damaged, please contact your seller.

4. Setup and Installation

This antenna is designed for easy, no-drilling installation.

  1. Unpack and Inspect: Carefully remove all packaging materials. Inspect the antenna and its components for any signs of damage.
  2. Prepare Surface: Clean the car roof surface thoroughly where the antenna will be mounted. Ensure the area is free of dust, dirt, wax, and moisture. A clean, dry surface is crucial for proper adhesion.
  3. Connect Cable: Connect the FM/AM signal cable from the underside of the shark fin antenna to your car's existing antenna base. Ensure a secure connection.
  4. Apply Adhesive: Remove the protective film from the adhesive base of the shark fin antenna.
  5. Position and Secure: Carefully align the antenna over the prepared area on your car roof. Press down firmly and evenly for several seconds to ensure strong adhesion. Avoid repositioning the antenna once it has been placed.
Underside view of shark fin antenna with cable and adhesive
Underside of the antenna showing the FM/AM connection cable and adhesive base.

5. Operating Instructions

Once properly installed, the shark fin antenna operates passively:

  • It will enhance your vehicle's AM/FM radio signal reception.
  • It serves as a decorative accessory, giving your car a modern and distinctive look.
White shark fin antenna with enhanced signal icon
The antenna is designed to provide enhanced signal reception.

6. Maintenance

  • Cleaning: Clean the antenna regularly with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Inspection: Periodically check the antenna's adhesion to the car roof to ensure it remains securely attached.
  • Storage: If removed, store the antenna in a dry, cool place away from direct sunlight and moisture.

7. Troubleshooting

7.1 Poor Signal Reception

  • Check Cable Connection: Ensure the FM/AM connection cable is securely attached to both the antenna and your car's antenna base.
  • Verify Contact: Make sure the antenna's internal components are making proper contact with your vehicle's existing antenna system.
  • Environmental Factors: Radio signal strength can vary based on location, terrain, and proximity to broadcasting towers. Test in different areas if possible.

7.2 Antenna Becomes Loose

  • Surface Preparation: Ensure the car roof surface was thoroughly cleaned and dried before initial installation. Any residue can compromise adhesion.
  • Re-application: If the antenna becomes loose, carefully remove it, clean both the antenna base and the car roof surface, and re-apply with a new, strong automotive-grade adhesive tape.

8. Specifications

MaterialHigh-quality ABS Plastic
Dimensions (L x W x H)17 cm x 7 cm x 6.5 cm (6.69 in x 2.75 in x 2.56 in)
Color OptionsGolden, Black, White, Gray, Silver, Red
Item TypeAerials
Signal TypeAM/FM
CertificationCE Certified
OriginMainland China
Dimensions of the shark fin antenna
Detailed dimensions of the shark fin antenna.

9. User Tips

No specific user tips were available for this product at the time of manual creation. For best results, ensure the installation surface is perfectly clean and dry before applying the antenna.

10. Warranty and Support

For any warranty claims, technical support, or inquiries regarding your product, please contact your original seller or the manufacturer directly. Please retain your proof of purchase.

Manufacturer Information:

Shanghai Cifang Information Technology Co., Ltd
Address: Room 8-106, No.8 Wenshui Road, Jing'an District, Shanghai, China

EU Authorized Representative:

WORLDWIDE INDUSTRY S.R.L.
Address: Strada DR. LEONTE ANASTASIEVICI No. 9, ROOM 2, 1st Floor, Apartment 2, Sectorul 5, Bucuresti, Romania
Email: worldwideindustrysrl@gmail.com
Tel: +40 260264922

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.