Introduction
Thank you for choosing the Marcala 2026 V2.0 Tire Pressure Monitoring System (TPMS). This advanced 6-sensor system is designed to enhance your driving safety by providing real-time tire pressure and temperature monitoring for your RVs, campers, vans, SUVs, and trailers. With its extended 50-foot range, dual charging capabilities, and multi-mode alarm system, you can drive with confidence and peace of mind.
Key Features
- 6-Sensor System with Extended 50-Foot Range: Supports up to 6 wheels, ideal for large vehicles and towing setups.
- Real-Time Monitoring: Provides live pressure and temperature updates every second while driving.
- High-Visibility LCD Display: Bright, full-color screen with auto-dimming for clear readability day or night.
- Dual Charging: Features both solar and USB charging options for continuous power.
- High Accuracy: Monitors 1-6 tires with 1 PSI accuracy, up to 144 PSI.
- IP67 Waterproof Sensors: Durable sensors designed to withstand rain, mud, snow, and extreme heat.
- Easy Installation: Quick and straightforward setup, ready to use in minutes.
- Multi-Mode Alarm System: 6 different alert modes for overpressure, underpressure, high temperature, rapid pressure loss, and sensor disconnect.
- Compact Design: Monitor hub measures approximately 3 x 3 x 1 inches and weighs 8 ounces.
- Reliable Bluetooth Connectivity: Stable transmission between sensors and display unit.
Package Contents
Please check the package for the following items:
- 1 x Marcala TPMS Monitor Hub
- 6 x Wireless Tire Pressure Sensors
- 1 x USB Charging Cable
- (Additional accessories such as a wrench or anti-theft nuts may be included)
Specifications
| Feature | Detail |
|---|---|
| Brand | Marcala |
| Model | 2026 V2.0 (6-Sensor) |
| Pressure Range | 0-144 PSI |
| Pressure Accuracy | ±1 PSI |
| Wireless Range | Up to 50 feet |
| Charging Options | Solar, USB |
| Sensor Waterproof Rating | IP67 |
| Monitor Dimensions (L x W x H) | 3 x 3 x 1 inches |
| Monitor Weight | 8 ounces |
| Supported Wheels | 1-6 wheels |
| Connectivity | Bluetooth |
| Material | Plastic |
Setup Guide
1. Charging the Monitor Hub
Before first use, ensure the monitor hub is fully charged. You have two options:
- Solar Charging: Place the monitor on your dashboard where it can receive direct sunlight. The built-in solar panel will charge the unit.
- USB Charging: Connect the provided USB cable to the monitor's USB port and a power source (e.g., car adapter, power bank, or wall charger).
Figure 1: Dual Charging (Solar & USB)
2. Sensor Installation
The sensors are designed for quick and easy installation. Follow these steps:
- Ensure your tires are at the recommended pressure before installing sensors for accurate baseline readings.
- Unscrew the existing valve stem caps from your tires.
- Screw each Marcala sensor onto the corresponding tire's valve stem. Ensure the sensor is securely tightened.
- A brief hiss of air during installation is normal as the sensor seats. This sound should stop once the sensor is snug. If air continues to leak, unscrew and reseat the sensor to ensure a proper seal.
- The system is ready to use once sensors are installed and the monitor is powered on.
Figure 2: High-Performance Sensors and Extended Range for RVs and Trailers
Operating Instructions
1. Powering On/Off and Display
- The monitor features an intelligent on/off function. It will automatically power on when it detects vehicle movement or tire pressure changes, and power off after a period of inactivity to save battery.
- The vibrant LCD display shows real-time pressure (in PSI) and temperature (in °F) for each monitored tire.
- The display's brightness automatically adjusts based on ambient light conditions for optimal visibility day or night.
Figure 3: Vibrant Smart Display for Day and Night Use
2. Real-Time Monitoring and Alerts
- While driving, the system continuously monitors tire pressure and temperature, updating readings every second.
- The monitor is equipped with a 6-mode alarm system to alert you to potential issues:
- Low Pressure Alarm
- High Pressure Alarm
- High Temperature Alarm
- Sensor Disconnect Alarm
- Low Battery Alarm (for sensors)
- Low Voltage Alarm (for monitor)
- When an alarm is triggered, the monitor will provide visual (flashing icons, color changes) and audible warnings. Address any alerts promptly and safely.
Figure 4: Powerful & Reliable Alarm System with 6 Alarm Modes
Maintenance
- Sensor Care: The sensors are IP67 waterproof, meaning they are protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion or high-pressure water jets directly on the sensors. Clean them with a damp cloth as needed.
- Monitor Cleaning: Wipe the monitor screen and body with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Battery Life: The monitor's solar charging helps maintain its battery. For optimal performance, ensure it receives adequate sunlight. If stored for extended periods, charge it via USB periodically.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Air leak during sensor installation | Sensor not properly seated on the valve stem. | A brief hiss is normal. If it continues, unscrew the sensor and reseat it firmly until the sound stops. |
| Monitor not updating readings when parked | System is in battery-saving "park mode". | This is normal behavior to extend sensor battery life. Updates will resume at full frequency once driving. |
| Sensor disconnect alarm | Sensor battery low, sensor damaged, or out of range. | Check sensor battery level on the monitor. Ensure sensors are within the 50-foot range. Inspect sensors for physical damage. |
| Inaccurate pressure readings | Sensors not calibrated, or initial tire pressure was incorrect. | Ensure tires are inflated to recommended pressure before installing sensors. Re-check readings with a reliable manual gauge. |
User Tips
- Understand Park Mode: When your vehicle is stationary, the TPMS sensors enter a power-saving mode and update less frequently. This is intentional to conserve battery and is not an indication of a malfunction. Readings will update in real-time once you start driving.
- Initial Setup: Always ensure your tires are inflated to their correct cold pressure before installing the sensors. This provides the most accurate baseline for the system.
- Range Optimization: For very long RVs or trailers, ensure the monitor is placed in a central location in the cab to maximize the 50-foot wireless range and maintain strong signal reception from all sensors.
Warranty & Support
The Marcala 2026 V2.0 TPMS is backed by a Lifetime Replacement Policy. This commitment reflects our confidence in the product's quality and our dedication to customer satisfaction. For any issues, questions, or support needs, please contact our customer service team. We are an American-owned family business committed to your safety and stand behind our products.
Please refer to your purchase documentation or the seller's store page for specific contact information.