Introduction
The Zoom R4 MultiTrak is a compact 4-track multitrack recorder (MTR) designed for musicians to capture musical ideas anytime, anywhere. It features 2 XLR/TS combo inputs, a built-in mic, and onboard effects. The 32-bit float technology eliminates the need for constant level monitoring during recording, allowing users to focus on creative music production. The R4 maintains high-quality audio throughout recording and editing processes, utilizing dual A/D converter circuits and 32-bit float WAV files.
For a comprehensive guide, you can also refer to the official user manual PDF: Zoom R4 Operation Manual (PDF)
Setup
1. Making Preparations
An SD card is always necessary for recording.
Inserting microSD Cards
- When the power is off, open the microSD card slot cover. Insert a microSD card with its connectors facing down all the way into the slot.
- To remove, push it further into the slot and then pull it out.
- Close the microSD card slot cover.
Note: Always ensure power is off when inserting or removing a card to prevent data loss. Insert with correct orientation. Recording/playback is not possible without a microSD card. Format new cards or cards used with other devices for optimal performance. Supported media: microSDHC (4 GB - 32 GB), microSDXC (64 GB - 1 TB).
Supplying Power
The R4 can be powered by a USB power supply (AC adapter, USB bus power, or portable battery) or AA batteries. A USB power supply takes precedence over AA batteries.
Installing Batteries
- After turning off the power, remove the cover on the bottom and install 4 AA batteries.
- Reattach the bottom cover.
Note: Use only one type of battery (alkaline, NiMH, or lithium) at a time. Set the correct battery type in settings for accurate charge display. If batteries lose charge, turn off power and replace immediately.
Connecting an AC Adapter
Connect the cable of the specified AC adapter (AD-17) to the USB port (Type-C). Plug the AC adapter into an outlet.
Using Other Power Supplies
The R4 can be operated using bus power from a computer connected to the USB port (Type-C) or a commercially available 5V portable battery.
2. Connecting Input Equipment
Connecting Mics and Guitars to INPUT A/B
Mics and guitars can be connected to the INPUT A and INPUT B jacks. The R4 supports Hi-Z input, allowing direct connection of guitars.
- Dynamic and Condenser Mics: Connect to the XLR plugs of INPUT A and INPUT B. Phantom power can be supplied to condenser mics.
- Guitars and Basses: Connect to the TS plugs of INPUT A and INPUT B.
Note: Connect to the INPUT A jack to use the R4's built-in effects when recording.
Connecting Synthesizers and Other Stereo Output Devices
For stereo output devices, connect the L output jack to INPUT A and the R output jack to INPUT B. Two adjacent tracks can be stereo-linked to be handled as one stereo pair.
3. Turning the Power On/Off
Turning the Power On
- Press the POWER button until the recording and playback indicators light.
- The Home Screen will open after the startup screen.
Note: The first time the R4 is turned on or after a factory reset, date and time settings will appear. The R4 can be set to automatically turn off after a period of inactivity (see 'Setting the function that automatically turns the power off'). If "No SD Card!" or "Invalid SD Card!" appears, check or format the microSD card.
Turning the Power Off
- Press and hold the POWER button. The display will become blank and the power will turn off.
Note: Do not disconnect the AC adapter or remove batteries while "Saving data..." is shown.
4. Setting Up When First Turned On
The initial setup screens appear after first power-on or factory reset. These include:
- Setting the date and time: This information is included in recording files.
- Setting the type of batteries used: Select the correct battery type for accurate remaining charge display.
Use the TRACK/FUNCTION buttons to navigate and ENTER to confirm settings. Use + and - buttons to adjust values.
Operating Instructions
1. Using the Tuner
The tuner function helps tune guitars and other instruments.
- Press and hold the OPTION button (represented by a square icon) when the Home Screen is open to open the Option Menu.
- While holding OPTION, press the TUNER button. This opens the Tuner Screen.
- Press TYPE, FLAT, and CALIB buttons to set each item.
- Play the open string you want to tune. The pitch detuning and nearest note name will be shown. Adjust until the pitch is correct.
Note: Flat tuning cannot be used with "Chromatic" tuner type. Standard pitch (A) can be set from 435 to 445 Hz.
Tuner Type Options:
| Display | Explanation | String number/note | ||||||
|---|---|---|---|---|---|---|---|---|
| Chromatic | Shows nearest note and detuning. | - | ||||||
| Guitar | Standard guitar tuning (7th string). | B | E | A | D | G | B | E |
| Bass | Standard bass guitar tuning (5th string). | - | B | E | A | D | G | |
| Open A | Open A tuning (open strings play A chord). | - | E | A | E | A | C# | E |
| Open D | Open D tuning (open strings play D chord). | - | D | A | D | F# | A | D |
| Open E | Open E tuning (open strings play E chord). | - | E | B | E | G# | B | E |
| Open G | Open G tuning (open strings play G chord). | - | D | G | D | G | B | D |
| DADGAD | Alternate tuning for tapping/other techniques. | - | D | A | D | G | A | D |
2. Setting the Rhythm (Pattern/Click)
A pattern, click, or other sound can be played as a guideline for keeping time during recording or playback.
- Press the RHYTHM button on the Home Screen to open the Rhythm Screen.
- Use the TRACK/FUNCTION buttons to select items and ENTER to confirm.
- Use + and - buttons to change setting values.
- When finished, press RHYTHM to return to the Home Screen.
Settings include: Rhythm (on/off), Pattern, Tempo, Volume, Pre Count. If Rhythm playback or Pre Count is on, the Home Screen will show playback position in bars and beats.
Rhythm Pattern Types:
The manual lists 83 rhythm patterns, including various time signatures and styles like GUIDE, Click, 8Beats, 16Beats, Rock, Punk, Jazz, Blues, Waltz, and more.
3. Recording
Opening Projects
Creating New Projects
- Press and hold the OPTION button when the Home Screen is open.
- While holding OPTION, press the NEW PRJ button. This creates a new project and returns to the Home Screen.
Note: Project names can be changed and files assigned to tracks after creation.
Opening Existing Projects
- Open the Project Menu (Press and hold OPTION, then press SETTING, then select "Project").
- Use TRACK/FUNCTION buttons to select "Project List" and ENTER.
- Select the desired project from the list and ENTER.
- Select "Open" to load the project.
Making Input Settings
Connect input equipment as described in the Setup section.
Selecting Tracks for Recording
Tracks for INPUT A and INPUT B can be assigned.
- Press the INPUT button on the Home Screen.
- Select the input to assign to each track by pressing the corresponding TRACK/FUNCTION button to cycle through input sources.
Input Source Options:
- -: Nothing connected (not recording).
- INPUT A: Guitar or dynamic mic to INPUT A jack.
- INPUT A*: Condenser mic to INPUT A jack (phantom power supplied).
- INPUT B: Dynamic mic to INPUT B jack.
- INPUT B*: Condenser mic to INPUT B jack (phantom power supplied).
Monitoring Input/Playback Sounds
- Connect headphones to the headphone/line out jack.
- Adjust the volume using the VOLUME buttons. The volume level is shown on the screen.
Enabling Stereo Linking
Two adjacent tracks (1/2 or 3/4) can be stereo-linked. Odd-numbered tracks are L channel, even-numbered are R. PAN setting is disabled. Odd-numbered track fader controls volume; even-numbered has no effect. Fader, EQ, Echo, and Reverb parameters are linked. Recording data is saved as mono files even if stereo-linked.
- When the Home Screen is open, simultaneously press the TRACK/FUNCTION buttons beneath the two tracks to be stereo-linked. A stereo-linking icon will appear.
- Repeat to disable.
Note: Stereo linking cannot be changed during recording or playback.
Making Track Settings
Equalizer, left-right balance, and effects can be set for each track. These settings apply during playback and bouncing, but do not alter the recorded data itself.
- From the Home Screen, press the TRACK/FUNCTION button beneath the desired track to open the Track Settings Screen.
- Use TRACK/FUNCTION buttons to select items and ENTER to confirm.
- Use + and - buttons to change setting values.
- Press BACK to return to the Home Screen.
Settings include: High, Middle, Low frequency equalizer bands (gain range -15 dB to +15 dB), Pan (left-right balance), Echo amount, Reverb amount.
Starting and Stopping Recording
- Press the RECORD button. Recording starts to the selected destination track, and the recording indicator lights. The elapsed recording time is shown.
- Press the STOP button to stop recording.
Note: Bouncing/exporting is not possible if a track exceeds a maximum recording time of 93 minutes.
Partially Re-recording (Punch-in Recording)
Punch-in/out allows re-recording specific parts of existing tracks.
- Determine the track(s) to be re-recorded and make input settings. Select "-" for tracks not being re-recorded.
- Move the playback position to just before the desired re-recording start point.
- Press the PLAY button to start playback.
- Press the RECORD button at the desired position to start recording (punch-in).
- Press the RECORD button again at the desired position to stop recording (punch-out). Playback will continue.
- Press the STOP button to stop playback.
- Press the PLAY button to review the recorded part.
Hint: For successful re-recording, maintain similar conditions (mic distance, guitar volume) as the original recording. Start singing/playing slightly before the punch-in point for smoother transitions.
Combining Recorded Tracks in a Bounce Track (Bouncing)
Bouncing mixes multiple tracks and records them to a "bounce track".
- Press the STOP button.
- Press the BOUNCE button on the Home Screen.
- Select the type of bounce ("Quick Bounce" or "Real Time Bounce") and press ENTER.
- The Bounce Screen will open. After bouncing, tracks 1-4 will become empty.
Quick Bounce: Executes quickly; sound cannot be adjusted during bounce.
Real Time Bounce: Processes audio in real-time, allowing adjustment of track signal levels with faders during bounce.
Note: Maximum 99 bounces. Rhythm patterns will be mixed in if enabled. Not possible if a track exceeds 93 minutes.
To cancel bouncing, select CANCEL. To restore the state before bouncing, press the UNDO button.
Using Effects
The R4 includes effects similar to ZOOM multi-effects products. There are two main types: Insert Effects and Send Effects.
Using Insert Effects
Insert effects are applied to INPUT A or the built-in mic during recording. Two effects can be chosen and their parameters adjusted. Settings are saved with each project.
- Press the EFFECT button on the Home Screen to open the insert effect setting screen.
- When the cursor is on the effect name, press ENTER.
- Use TRACK/FUNCTION buttons to select the effect type and ENTER to confirm.
- Use TRACK/FUNCTION buttons to move the cursor to the first parameter and ENTER to select it.
- Use + and - buttons to adjust the parameter and ENTER to confirm.
- Repeat for the second effect and its parameters.
- Press EFFECT to return to the Home Screen.
Note: Insert effects only affect sound input from INPUT A or the built-in mic and are applied only during recording. They do not affect sound after recording. For details on effects, refer to the ZOOM website (zoomcorp.com).
Using Send Effects (Echo/Reverb)
The two types of send effects are Echo and Reverb.
Adjusting the amount of Echo/Reverb
Adjust these levels in the Track Settings (see 'Making Track Settings' above).
Adjusting Echo/Reverb parameters
- Press the STOP button.
- Press and hold the OPTION button, then press SETTING to open the Settings Menu.
- Use TRACK/FUNCTION buttons to select "Echo/Reverb" and ENTER.
- Use TRACK/FUNCTION buttons to select an item (Echo Time, Echo Repeat, Reverb Decay) and ENTER.
- Use + and - buttons to adjust the parameter.
- Press BACK to return to the Echo/Reverb Settings Screen.
4. Playing Recordings
Starting and Stopping Playback
- Press the PLAY button. This plays the selected file. Press again to stop.
- Press the STOP button. This stops playback. Press again when stopped to move playback position to file beginning.
Other Playback Operations
- Search Backward Button: Brief press moves playback position backward. Continuous press moves backward rapidly.
- Search Forward Button: Brief press moves playback position forward. Continuous press moves forward rapidly.
5. Managing Projects
Projects are saved on the microSD card. They can be opened, renamed, duplicated, and deleted.
Folder and File Structure on microSD Cards
When recording, folders and files are created as follows:
- Root: Contains exported audio files (WAV) for loading.
- R4_Project folder: Contains project folders (e.g., "yyyymmdd_001" to "yyyymmdd_999").
- Project folders: Contain audio files for each track (e.g., TRACK1_01.WAV) and a project file (R4PRJDATA.r4prj) with project-specific settings.
Opening the Project Menu
- Press and hold the OPTION button, then press SETTING to open the Settings Menu.
- Use TRACK/FUNCTION buttons to select "Project" and ENTER to open the Project Menu Screen.
Changing Project Names
- From the Project Menu, select "Project List" and ENTER.
- Select the project to rename and ENTER.
- Select "Rename".
- Input the new name (up to 13 characters) using the TRACK/FUNCTION buttons and ENTER.
Duplicating Projects
- From the Project Menu, select "Project List" and ENTER.
- Select the project to duplicate and ENTER.
- Select "Copy".
- Input the new name for the duplicated project.
Deleting Projects
- From the Project Menu, select "Project List" and ENTER.
- Select the project to delete and ENTER.
- Select "Delete" from the options menu, then confirm "Delete" on the confirmation screen.
Assigning Files to Tracks
Recording files from existing projects or audio files on the microSD card can be assigned to a project.
- Open the project where you want to assign files.
- Press and hold the OPTION button, then press FILE to open the File Assign Menu.
- Select the track for assignment and ENTER.
- Select an item ("Project", "SD Card", "Clear Track") and ENTER.
- Use BACK to return.
File Formats: WAV and MP3 can be assigned.
Exporting Projects as Audio Files
Projects can be exported as audio files (WAV, MP3) to the root directory of the microSD card.
- Open the Project Menu.
- Select "Export" and ENTER.
- Select the desired file format (WAV, MP3) and ENTER.
- Select the desired bit depth (16-bit, 24-bit, 32-bit float) and ENTER. (MP3 is fixed at 128 kbps).
- Select whether to normalize ("Off", "On") and ENTER.
- Select "Execute" and ENTER to start exporting.
Note: If rhythm pattern playback is enabled, it will be mixed into the audio file. Exporting is not possible if a track exceeds 93 minutes.
Deleting Files
Unneeded audio files can be deleted.
- Open the Project Menu.
- Select "File Delete" and ENTER.
- Select the file to delete and ENTER.
- Select "Delete" on the confirmation screen.
6. Using as an Audio Interface
The R4 can send input signals to a computer, smartphone, or tablet, and output signals from these devices.
Connecting Computers, Smartphones, and Tablets
- Press and hold the OPTION button, then press SETTING to open the Settings Menu.
- Select "USB" and ENTER.
- Select "Audio Interface" and ENTER.
- Select the device type ("PC/Mac" or "Mobile Device") and ENTER.
- Connect the R4 to your device using a USB cable (Type-C).
Note: A driver is necessary for Windows (download from zoomcorp.com). For iOS/iPadOS, a Lightning to USB 3 Camera Adapter may be needed. Bus power operation may vary depending on the device's USB power capability.
Making Mix Settings for Input Audio
The USB audio signal routing can be set on the Audio Interface Screen.
- Press MONO MIX to switch between Off (separate mono files for INPUT A and B) and On (mixed to mono, sent as two channels).
Setting Direct Monitoring
Direct monitoring outputs the sound input to the R4 before sending it to the connected device, allowing monitoring without latency.
- Press MONITOR on the Audio Interface Screen to switch it On or Off.
Setting the Bit Depth
The bit depth for audio sent to a computer, smartphone, or tablet can be set.
- Press FORMAT on the Audio Interface Screen to switch between 24-bit and 32-bit float.
Note: Ensure your app/device supports 32-bit float. Minimize R4 headphone volume before connecting to external devices. Windows requires a dedicated driver for 32-bit float.
Disconnecting from Computers, Smartphones, and Tablets
- On the R4, select EXIT on the Audio Interface Screen.
- Use TRACK/FUNCTION buttons to select "Exit" and ENTER. This disconnects the R4.
- Disconnect the USB cable.
Note: Always perform safe ejection procedures on your computer/device before disconnecting the USB cable.
7. Managing microSD Cards
Checking microSD Card Information
- Press and hold OPTION, then press SETTING.
- Select "SD Card" and ENTER.
- Select "Remaining" and ENTER to view available space.
Formatting microSD Cards
Formatting maximizes card performance and deletes all data.
- Press and hold OPTION, then press SETTING.
- Select "SD Card" and ENTER.
- Select "Format" and ENTER.
- Select "Execute" and ENTER.
Note: All data will be deleted. Formatting can also be initiated by holding RECORD while turning on power.
Testing microSD Cards
Test the writing speed to confirm performance.
- Press and hold OPTION, then press SETTING.
- Select "SD Card" and ENTER.
- Select "Performance Test" and ENTER.
- Choose "Quick Test" or "Full Test" and ENTER.
- Select "Execute" and ENTER to start.
Quick Test: Short test. Full Test: More thorough, shows estimated time. Even if "OK", no guarantee against future writing errors.
8. Making Various Settings
Setting the Date and Time
- Press and hold OPTION, then press SETTING.
- Select "System" then "Date/Time" and ENTER.
- Adjust values using + and - buttons, navigate with TRACK/FUNCTION buttons, and ENTER to confirm.
- Select "OK" and ENTER when done.
Note: Date/time settings reset if power is not supplied for a while.
Setting the Type of Batteries Used
- Press and hold OPTION, then press SETTING.
- Select "System" then "Battery Type" and ENTER.
- Select "Alkaline", "Ni-MH", or "Lithium" and ENTER.
Setting Display Power Saving
Dims display backlight after inactivity to save power.
- Press and hold OPTION, then press SETTING.
- Select "System" then "Power Saving" and ENTER.
- Select "Off" (always bright) or "On (30sec)" (dims after 30 seconds) and ENTER.
Setting the Display Brightness
- Press and hold OPTION, then press SETTING.
- Select "System" then "LCD Brightness" and ENTER.
- Select "Low", "Medium", or "High" and ENTER.
Setting the Function that Automatically Turns the Power Off
The R4 can automatically turn off if unused for a set time (default: On).
- Press and hold OPTION, then press SETTING.
- Select "System" then "Auto Power Off" and ENTER.
- Select "Off" (power stays on) or "On" (turns off after 10 hours of inactivity) and ENTER.
Note: Auto power off is disabled during recording/playback, audio interface use, file transfer, or card tests.
Restoring Factory Default Settings
- Press and hold OPTION, then press SETTING.
- Select "System" then "Factory Reset" and ENTER.
- Select "Execute" and ENTER.
Note: All settings will be restored to factory defaults. Initial setup screens will appear on next power-on.
9. Managing the Firmware
Checking the Firmware Versions
- Press and hold OPTION, then press SETTING.
- Select "System" then "Firmware" and ENTER to view versions.
Updating the Firmware
Latest firmware updates can be downloaded from the ZOOM website (zoomcorp.com). Follow the instructions in the "R4 Firmware Update Guide" on the download page.
Checking Latest Information about the R4
A 2D code for R4-related help can be displayed on the unit. Press and hold OPTION, then press SETTING. Select "System" then "Help" and ENTER. Scan the QR code with a smartphone/tablet.
Maintenance
- MicroSD Card Care: Regularly format microSD cards for optimal performance. Back up data before formatting. Test card performance periodically.
- Firmware Updates: Keep the device firmware updated to ensure optimal functionality and access to new features. Check zoomcorp.com for the latest versions.
- Battery Management: Use the correct battery type setting. Replace batteries promptly when low. Remove batteries if the unit will not be used for an extended period.
- Cleaning: Use a soft, dry cloth to clean the unit. Avoid abrasive cleaners or solvents.
- Storage: Store the R4 in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If the R4 is operating strangely, check the following:
No Sound or Very Quiet Output
- Check mic orientation and connected equipment volume settings.
- Verify headphone connection and volume.
- Ensure channel faders are not too low.
- Check R4 input source settings and phantom power settings.
- Confirm INPUT A/MIC switch is set correctly.
- Verify level meters are rising to an appropriate level.
Built-in Mic Sound is Distorted
- The input sound level might be too high. Move the R4 built-in mic further from the sound source.
INPUT A/B Sound is Distorted
- Adjust the volume of the connected device.
- Confirm the R4 input source setting is correct.
Recording is Not Possible
- Confirm INPUT A/MIC switch is set correctly.
- Verify connected device is properly connected.
- Check recording track settings.
- Ensure microSD card has open space, is loaded properly, and is functional (test if necessary).
Recorded Sound Breaks Up
- Format the microSD card using the R4.
- Confirm the microSD card is functional (test if necessary).
Recorder Not Recognized by Computer/Smartphone/Tablet (USB)
- Use a USB cable that supports data transfer.
- Ensure the R4's operation mode is set correctly (Audio Interface or File Transfer).
- If using 32-bit float, confirm the device/app supports it.
- For Windows, install the dedicated R4 driver from zoomcorp.com.
Short Battery Operation Time
- Correctly set the battery type in settings.
- Turn off unused inputs and phantom power.
- Set the display to dim after inactivity.
- Reduce display brightness.
- Consider using rechargeable NiMH or lithium batteries for longer life.
Date and Time Frequently Reset
- If power is not supplied (AC adapter or batteries) for some time, date and time settings will reset. Set them again if the Date/Time Setting Screen appears.
Specifications
| Category | Detail | |
|---|---|---|
| Input and output channels | Inputs | Built-in mic (mono) x 1, XLR/TS inputs (mono) x 2 |
| Output | Headphones x 1 | |
| Inputs (XLR/TS) | Connectors | 2 XLR/TS combo jacks (Balanced, XLR: 2 HOT) |
| Input gain | No adjustment required (dual A/D converter circuit used) | |
| Input impedance | XLR: 2.3 kΩ, TS: 1 MΩ | |
| Maximum input level | XLR: +4 dBu, TS: +10 dBu | |
| Phantom power | +48 V (switchable separately for INPUTS A and B) | |
| Equivalent input noise | XLR: -120 dBu or less (IHF-A), TS: -107 dBu or less (IHF-A) | |
| Built-in mic input | Directionality | Omnidirectional |
| Input gain | No adjustment required (dual A/D converter circuit used) | |
| Maximum sound pressure input | 115 dB SPL | |
| Output (Headphones) | Connector | 1 stereo 3.5mm mini jack |
| Output impedance | 10 Ω | |
| Maximum output level | 20 mW + 20 mW (into 32Ω load) | |
| Recorder | Maximum simultaneous recording tracks | 2 |
| Recording format | WAV: 48kHz, 32-bit float, mono | |
| Recording media | microSDHC (4 GB - 32 GB), microSDXC (64 GB - 1 TB) | |
| Display | 2" full-color LCD (240 x 320) | |
| USB | Connector | USB Type-C (supports data transfer, USB bus power) |
| Audio interface class | USB 2.0 High Speed | |
| Sampling frequency | 48 kHz | |
| Bit Rate | 24-bit or 32-bit float | |
| Power supply | Batteries | 4 AA (alkaline, lithium, or rechargeable NiMH) |
| AC adapter | ZOOM AD-17 (5V/1.0A) | |
| Estimated continuous operation time (Recording 1 track, phantom power off, headphones into 32Ω load, power saving on) | Alkaline: ~7 hours, NiMH (1900 mAh): ~6 hours, Lithium: ~14 hours (approximate values, vary by conditions) | |
| Power consumption | 5 W | |
| External dimensions | 74 mm (W) x 138 mm (D) x 36 mm (H) | |
| Weight (including batteries) | 287 g | |
Warranty and Support
For warranty information, product support, and service, please visit the official ZOOM Corporation website or contact your local distributor. Keep your proof of purchase for warranty claims.
Official Website: zoomcorp.com
User Tips
- Always use a high-quality, properly formatted microSD card for reliable recording.
- Experiment with both "Quick Bounce" and "Real Time Bounce" to see which workflow suits your needs best for combining tracks.
- When using the R4 as an audio interface, remember to install the necessary drivers for Windows systems to ensure full functionality, especially with 32-bit float recording.
- Take advantage of the dual A/D converters and 32-bit float recording to capture a wide dynamic range without worrying about clipping, allowing for greater flexibility in post-production.
