1. Product Overview
The JOYING JY-UTS14N12 is a 12.95-inch QLED single DIN universal Android multimedia player designed for in-car entertainment and navigation. It features a high-resolution 1920x1200 display, runs on Android 13, and is powered by a Qualcomm 6490 Octa-core processor with 12GB RAM and 256GB ROM. This unit supports Wireless CarPlay and Android Auto, offering a comprehensive suite of features for an enhanced driving experience.
Package Contents
The package includes the following items:
- Display Screen (12.95")
- Chassis
- Single Din Cage
- Mounting Sleeve
- Plastic Trim Out
- Left & Right Brackets
- M4x4x7 Screws (14 pcs)
- Extraction Keys
- Screen Ribbon Cable
- Universal Cable
- BT Antenna *1
- WiFi Antenna *2
- 4G Antenna *2
- USB Cable *2
- User Manual
- GPS Antenna *1
- External Mic *1
- AR Cable *1
For detailed basic product operation, including setting up KEY/CAN, TF CARD, and SIM CARD, please refer to the comprehensive user manual PDF available at User Manual (PDF).
2. Setup and Installation
This section provides a general guideline for installing the single DIN car stereo with a floating screen. Ensure your vehicle is compatible before proceeding.
2.1. Initial Assembly of Chassis and Brackets
- Assemble the left and right brackets with the single DIN cage using 8 supplied M4x4x7 screws (4 on top, 4 at the bottom).
- Connect the screen ribbon cable to the chassis correctly. Ensure you have reviewed the Basic Product Operation manual for correct setup of KEY/CAN, TF CARD, and SIM CARD.
- Push the chassis into the single DIN cage and secure it in place with 2 supplied M4x4x7 screws (one on top, one on bottom).
2.2. Vehicle Integration
- Disconnect your vehicle battery and remove the factory or old radio from the dashboard console.
- Place the mounting sleeve into the dash or fascia dash kit. Bend the tabs with a screwdriver to lock it in place.
- Connect the power cable and insert the chassis into the mounting sleeve.
- Install the plastic trim out. If you need to remove the chassis later, insert the two extraction keys into the slots on the left and right sides, then press deeply down together to release it.
- Connect the screen ribbon cable and align the four plastic clips from the screen to the holes of the chassis evenly. Push slightly on the outer part of the screen until all four clips are in place. Note: The position of the plastic clips can be adjusted to move the screen up and down depending on installation requirements.
3. Operating Instructions
3.1. Basic Operation
- Fast Boot: Once the car key is inserted, the unit will start up immediately and enter the user interface within 2-5 seconds. The first boot-up may take less than 20 seconds.
- Sleep to Wake Time: Less than 1 second.
- Display: The 12.95-inch QLED screen offers a 1920x1200 high-resolution display.
- Light/Dark Mode: Switch between light and dark modes manually or set it to auto-switch based on ambient light or time of day.
3.2. Connectivity
- Bluetooth: Equipped with Qualcomm 3031 chip Bluetooth 5.1/5.2 for low power consumption, faster transmission, and stable signal. Supports audio streaming, automatic phone book transfer, and hands-free calls. Note: Only supports phone and OBD dongle connections.
- USB / Micro SD: Features 3x USB ports and 1x Micro SD card slot, supporting storage up to 128GB.
- TYPE-C Port: Supports connecting a portable screen via a Type-C extension cable (sold separately) to navigate on the front screen and watch movies on the rear screen simultaneously.
- Wireless CarPlay & Android Auto: Seamlessly integrate your smartphone for navigation, music, and other apps.
3.3. Navigation and Multimedia
- Multiband GNSS: Integrated Qualcomm Location Suite Engine for global positioning (GPS, GLONASS, NavIC, BeiDou, Galileo, QZSS) supporting L1 and L5 bands.
- App Management: Access navigation, entertainment, and third-party apps through a unified interface. Tap the '---' icon to switch to the app's interface, and long-press to switch apps.
3.4. Audio Features
- Sound Effects: 20 selectable sound effect styles and 48-band EQ for detailed customization of bass, mid, and treble.
- High-Fidelity Audio: Features Velvet Sound AKM 7739 DSP (24-bit ADC & 32-bit DAC) and High-Fidelity Sound AKM 4432 DAC (192kHz PCM Input, 32-bit Processing & Low-Distortion).
- DTS Sound: 4-channel, 5532 Op-Amp & TDA7850 Amplifier for enhanced audio enjoyment.
3.5. External Device Integration
- HDMI Input: Turn your head unit into a monitor for big-screen enjoyment from gaming consoles, media players, and more.
- HDMI Output: Sync the infotainment screen's navigation and media to rear headrest screens for back-seat viewing.
- USB Type-C: Connect a portable screen to map the screen and achieve dual-screen operation. (HDMI cable and USB Type-C cable are not included).
4. Optional Accessories
The following accessories are not included in the package and must be purchased separately to enable additional functionalities:
- AR Front Camera: Records the front road automatically while driving.
- AR Rear Camera: Switches to the reverse display automatically when reversing the car.
- OBD2 Diagnostic Dongle: Connects via Bluetooth to retrieve real-time data and trouble codes from your vehicle computer.
- 360-degree Panoramic Camera: The unit supports a 360-degree panoramic camera via a dedicated interface. The camera itself is not included. Activation of the 360-degree view function requires an additional fee of USD 30. This fee covers activation service only and does not include after-sales support for the camera.
5. Specifications
| Feature | Detail |
|---|---|
| Model | JY-UTS14N12 |
| Operating System | Genuine Android 13 |
| Display Size | 12.95 inch |
| Resolution | 1920*1200 QLED |
| RAM | 12GB |
| ROM | 256GB |
| Processor Type | Qualcomm 6490 (Octa-core) |
| Out Power | 4*50W |
| Voltage | 10V-14V |
| Working Temperature | -20℃ to 70℃ |
| Bluetooth | Qualcomm 3031 chip Bluetooth 5.1/5.2 |
| TF/Micro SD Slot | 1 |
| USB Ports | 3x USB ports, 1x Type-C port |
| Max External Memory | 256G |
| Special Features | Support 3G/4G Network, WiFi, Built-In Speaker/Microphone, Steering Wheel Control, Can-Bus, DSP, CarPlay, Android Auto, Split Screen |
| Digital Media Format | Mp3, MP4, JPEG, WMA |
| Item Weight | 5kg |
| Material | Metal+ABS+Glass |
| Certification | CE |
6. Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to gently wipe the QLED screen. Avoid abrasive cleaners or solvents that could damage the display.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Follow the on-screen prompts or refer to the system settings for update options.
- Environmental Conditions: Operate the unit within the specified working temperature range (-20℃ to 70℃) to prevent damage. Avoid exposing the unit to extreme heat, cold, or direct sunlight for prolonged periods.
- Cable Connections: Ensure all cables are securely connected to prevent intermittent issues or loss of functionality. Regularly inspect cables for any signs of wear or damage.
7. Troubleshooting
- Unit Not Powering On: Check all power connections, including the vehicle battery connection. Ensure the car key is inserted and the ignition is on.
- No Sound: Verify speaker connections, volume levels, and audio output settings. Check if the unit is muted or if the audio source is correctly selected.
- Touchscreen Unresponsive: Try restarting the unit. If the issue persists, ensure the screen ribbon cable is properly connected.
- GPS Signal Issues: Ensure the GPS antenna is correctly installed and has a clear line of sight to the sky. Check GPS settings within the unit.
- Bluetooth Connectivity Problems: Ensure Bluetooth is enabled on both the unit and your device. Try unpairing and re-pairing devices. Confirm your device is compatible with Bluetooth 5.1/5.2.
- CarPlay/Android Auto Not Working: Ensure your phone is compatible and the connection (wireless or wired) is stable. Check app permissions on your phone.
8. Warranty and Support
All JOYING products are tested 5 times to ensure proper functionality before shipping and come with a 24-month Manufacturer Warranty.
Warranty Exclusions
The warranty does not cover damage resulting from:
- Improper installation
- Accident
- Misuse or abuse
- Improper wiring
- Incorrect voltage operation against the instructions in the owner's manual
Repair Policy
- Within One Month of Purchase: If the product has a problem, a new replacement unit can be provided. Buyers are responsible for return shipping fees.
- After One Month, Within One Year: Free repair service is available. Buyers are responsible for return shipping fees.
- After One Year: Free repair service is available. Buyers are responsible for two-way shipping fees.
9. User Tips
- Pre-Installation Check: Before starting the installation, always disconnect the vehicle battery to prevent electrical shorts or damage.
- Cable Management: Route all cables carefully to avoid pinching or interference with moving parts in the dashboard. Secure loose cables to prevent rattling.
- Customization: Explore the extensive sound settings, including the 48-band EQ and various sound effects, to tailor the audio output to your personal preferences.
- App Compatibility: While the unit supports many third-party apps, ensure they are optimized for Android 13 and car multimedia systems for the best experience.
- Optional Accessories: Consider purchasing optional accessories like the AR cameras or OBD2 dongle to unlock the full potential of your multimedia player.