QIDEWIN W16W T15 Canbus LED Reverse Light User Manual

Introduction

Thank you for choosing the QIDEWIN W16W T15 Canbus LED Reverse Light. This product is designed to provide superior illumination for your vehicle's reverse and turn signal functions, offering enhanced visibility and safety. Featuring 2835 LED chips, these bulbs deliver a bright, 6000K white light that is significantly more efficient and brighter than traditional halogen bulbs, while being Canbus error-free for seamless integration with your vehicle's electrical system.

Safety & Warnings

Installation and debugging should only be performed by professional personnel. Unauthorized modification of internal circuits or light sources is strictly prohibited.
For outdoor use, ensure the seal is intact to prevent water accumulation damage. Keep the product away from sources of fire and corrosive environments.
Connect the bulb directly to the corresponding plug model of your vehicle.
Warning: Keep the device and its cord out of reach of children under 3 years old.

Product Overview

Ten T15 LED Canbus Error Free bulbs — Figure 1: A set of 10 T15 LED Canbus Error Free bulbs.

Diagram highlighting 2835 LED chips and features — Figure 2: Features of the 2835 LED chips, including 6000K white light, high brightness, no dark spots, 60% improved light efficiency, and 300% brighter than halogen bulbs.

Diagram showing LED bulb dimensions — Figure 3: Dimensions of the W16W/T15 LED bulb: 13mm width, 20.5mm length from base to LED, and 40.5mm total length.

Comparison of LED bulb to halogen and light output — Figure 4: Visual comparison showing the compact size of the LED bulb relative to a traditional halogen bulb, and the difference between bright white LED light and dim yellow halogen light.

Car demonstrating bright LED reverse lights — Figure 5: A vehicle demonstrating the significantly brighter illumination provided by the LED reverse lights.

Diagram showing wide application as backup reverse light — Figure 6: The W16W T15 LED bulb is suitable for various vehicles as a backup reverse light.

Installation

The QIDEWIN W16W T15 LED bulbs are designed for direct replacement of your vehicle's existing W16W or T15 halogen bulbs. Ensure your vehicle uses the W16W/T15 bulb type for reverse or turn signal lights before installation.

Locate the reverse light or turn signal housing in your vehicle. Consult your vehicle's owner's manual for specific instructions on accessing the bulb.
Carefully remove the old halogen bulb by twisting or pulling it out, depending on the socket type.
Insert the new QIDEWIN W16W T15 LED bulb into the socket. Ensure it is securely seated.
Test the light function before reassembling the housing. If the light does not illuminate, try rotating the bulb 180 degrees in the socket (LEDs are polarity sensitive).
Reassemble the light housing and any removed panels.

For additional guidance, a general user manual in PDF format is available: User manual (PDF).

Operation

Once installed, the QIDEWIN W16W T15 LED bulbs operate automatically with your vehicle's existing lighting system. They will illuminate when the reverse gear is engaged or when the turn signal is activated, providing instant, bright light. The Canbus error-free design ensures that your vehicle's onboard computer system will not detect any bulb-out warnings or errors.

Maintenance & Storage

Cleaning

Turn off the device before cleaning. Use a soft, lint-free cloth to gently wipe the bulb surface. Do not use abrasive cleaners or solvents.

Storage

Store in a dry place at room temperature (15°C - 35°C). If not used for a long time, store the device in its original packaging to protect it from dust and damage.

Troubleshooting

Lights do not turn on, flicker, or cannot be controlled: First, check if the bulb is securely plugged into the socket. Ensure correct polarity by rotating the bulb 180 degrees if necessary. If the problem persists, contact customer service with your vehicle information for targeted solutions.
Preventing battery drain during long-term parking: If the vehicle is parked for an extended period (more than 15 days), it is recommended to disconnect the power supply to the light circuit to avoid any minimal power consumption that could affect battery life.
Scratching or damage to the lamp surface: Avoid scratching the surface of the lamp assembly with sharp objects to prevent affecting light transmission. Do not use high-pressure water guns to directly flush the controller interface when washing the car.

Specifications

Feature	Detail
Model	W16W / T15
Interface Type	T15
Voltage	12V / 24V
Lumens	2400LM
Color Temperature	6000K (White)
Exposure Angle	360 degrees
LED Chip Type	2835 LED Chips
Application	Reverse Light, Turn Signal
Feature	Canbus Error-Free

Disposal & Recycling

This product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.

User Tips

Always double-check your vehicle's bulb type before purchasing to ensure compatibility.
When handling the LED bulbs, avoid touching the LED chips directly to prevent damage from oils or static.
If you experience any issues with Canbus errors, ensure the bulb is fully seated and the vehicle's electrical system is functioning correctly.

Warranty & Support

QIDEWIN products are manufactured to high-quality standards. For any questions, technical assistance, or warranty claims, please contact QIDEWIN customer support through your purchase platform. Please retain your proof of purchase for warranty service.

QIDEWIN W16W T15