Skydroid Skydroid C13

Contents

Skydroid C13 High-Definition Multifunctional Three-Light Gimbal User Manual

Model: Skydroid C13

1. Product Introduction

The C13 is a compact, high-definition three-light gimbal. It utilizes a new-generation imaging chip and is paired with a high-definition distortion-free camera. With an effective pixel count of 5 million, it boasts robust 2K video recording and photo-taking capabilities. It supports 30-times digital zoom, bringing distant beautiful sceneries up close. Equipped with a thermal imaging camera with a resolution of 640x512, it offers a wide field of view and clear images, enabling long-distance observation of various heat sources. In combination with the laser ranging module, the effective ranging distance can reach up to 1 kilometer. The industrial-grade three-axis stabilization structure is adopted, which significantly reduces picture jitter, keeping the image in a stable state at all times. It can be applied in fields such as fire rescue, animal protection, and security monitoring.

2. Product List

The following items are included in the product package:

ItemQuantityDescription / Image
C13 Main Body1Skydroid C13 Gimbal Camera front viewFront view of the Skydroid C13 gimbal camera.
Gimbal fixing screws (M2.5x6)4Gimbal fixing screwsSmall screws used for mounting the gimbal.
Ethernet port power cable1Ethernet port power cableCable for power and network connection.
32G Kingston Memory Card1 (Pre-installed)32GB Kingston Memory CardMicroSD card for data storage.
Card reader1USB Card ReaderDevice to read the memory card.

3. Product Overview: Interface and Definitions

The C13 gimbal features various interfaces for power, control, and data. A visual diagram in the full manual illustrates the layout of these interfaces. Key connections include:

  • POW+LAN: Power and Local Area Network connection.
  • UART: Universal Asynchronous Receiver/Transmitter interface, with TX (transmit), RX (receive), and GND (ground) pins.
  • TF Card Slot: Located at the bottom of the gimbal for inserting the MicroSD memory card.

For a detailed visual representation of the gimbal's interfaces and their definitions, please refer to the diagram in the official user manual. An image showing the gimbal's top and bottom views with labeled ports is typically provided.

Skydroid C13 Gimbal Overview with Labeled Ports

Image: Skydroid C13 Gimbal showing POW+LAN, UART, and TF card slot locations.

4. Specifications

C13 Overall Parameters

FeatureSpecification
Video output signal interfaceNetwork port
Control signal input interfaceNetwork port
Operating voltage7.2V-72V
Operating current12V 334mA
Operating ambient temperature-10°C ~ +50°C
Weight176g
Dimensions59mm (Length) × 61mm (Width) × 92mm (Height)
Controllable angle range-90° to +10° (Pitch axis); -90° to +90° (Yaw axis); -45° to +45° (Roll axis)
Ceiling-mounted/Inverted-mounted modeSupported
Global centering/One-key downward/Yaw centeringSupported

C13 Visible Light Camera Parameters

FeatureSpecificationFeatureSpecification
Lens pixel5 millionVideo resolution for card recording2880x1620
Lens specification1/2.8 inchVideo storage formatTS
Aperture2.2Photograph resolution2880x1620
HFOV/VFOV/DFOV77.4°/48.8°/85.6°Photograph storage formatJEPG
Zoom ratio30x Digital ZoomSupported memory card typesSupports MicroSD storage (up to 128GB)
Video transmission resolution1280x720Supported file systemsFAT32

C13 Thermal Imaging Camera Parameters

FeatureSpecificationFeatureSpecification
Resolution640x512FOV24.8°x18.7°
Focal length9.1mmPixel pitch12µm
ApertureF=1.0Response band8-14µm
Frame rate30HzField of view angle48.7°x38.6°
Thermal time constant<10msDetection range1.1KM
Focal length9.1mm

C13 Laser Ranging Parameters

FeatureSpecificationFeatureSpecification
Human eye safety levelClass 1Detection range5M-1000M
Wavelength905nmRanging Accuracy±1m
Laser divergence angle5mradMeasurement Frequency1-5Hz
Transmitting Aperture10x7.5mmAccuracy rate≥98%
Receiving Aperture15x10mmFalse Alarm Rate≤1%

5. Installation and Debugging

5.1 Schematic Diagram of Screw Hole Positions and Spacing

The screw specifications for the gimbal are M2.5*6, and 4 screws are required. A diagram in the full manual shows the screw hole positions and spacing, typically indicating a 22mm width and 34mm height for the mounting pattern.

Important Installation Notes:

  • Do not hang the gimbal on the aircraft when not in use. Long-term hanging can accelerate the deformation of shock-absorbing balls, leading to reduced shock absorption and a 'jello' effect in footage.
  • When installing, ensure the shock-absorbing plates are perfectly perpendicular and parallel to each other. Incorrect installation can deform the shock-absorbing balls, decrease performance, and cause self-inspection failure.

5.2 Gimbal Working Modes

The gimbal supports 'Hoisting mode' and 'Flip mode'. These can be configured in the FPV settings. The factory default is 'Hoisting mode'. Do not power on the gimbal if it is installed in an inverted way. Always ensure the gimbal is placed correctly according to the selected working mode to prevent damage to the gimbal motor.

5.3 Gimbal Wiring Diagram and Explanation

A detailed wiring diagram is provided in the full manual, illustrating the connections between the C13 gimbal and the GR01 module. The main connections are:

  • Power: Red JST-2P male connector, supplying 7.2V-72V (DC power supply or lithium battery).
  • Ethernet Cable (Signal Transmission): This cable carries network IP signals (RX-, RX+, TX-, TX+).

Video Transmission:

  • Visible light video output: RTSP stream rtsp://192.168.144.108:554/stream=1
  • Thermal imaging video output: RTSP stream rtsp://192.168.144.108:555/stream=2

5.4 Usage of C13 (Software and Basic Operation)

  1. Software Installation: Install the latest version of the Gimbal FPV software on your remote control. The software can be downloaded from: http://file.skydroid.xin/SkydroidCameraFPV.apk
  2. Gimbal Startup: After properly installing and fixing the gimbal, power it on. The gimbal will start up automatically. Wait for the startup process to complete.
  3. Accessing FPV Software: Open the Gimbal FPV software, select 'C13' as the connection method, and click 'Enter'.
  4. FPV Home Page Overview: The FPV home page displays the visible light video window and thermal imaging video window. It includes controls for yaw to center, global center return, one-key down, record video, take photo, floating window, system settings, parameter settings, crossline, reverse line, distance measurement, and switch connection. A visual representation of the FPV interface is available in the full manual.

5.5 Gimbal Parameter Settings

Within the FPV software, navigate to 'Parameter Settings' to configure various aspects of the gimbal. This section allows adjustment of image parameters, pan tilt control, correction of pot lid effect, AI gimbal settings, PTZ calibration, operating mode, gimbal speed, color palette, and laser ranging.

5.5.1 Image Parameters

Adjust camera picture parameters such as tone, brightness, saturation, contrast ratio, and sharpness. Options for 'Custom', 'Standard', 'Bright', and 'Flamboyant' are available.

5.5.2 Pan Tilt Control

In 'Parameter Settings' -> 'Pan-tilt Control', you can choose between target following and three control methods: 'Enable Joystick', 'Enable Gesture', and 'Enable Remote Control'. Multiple methods can be selected simultaneously, but target following cannot be used with gesture control.

  • Gimbal Target Following: After selecting a target, the C13 will automatically track it.
  • Virtual Joystick Control: Use the virtual joystick to control gimbal pan and tilt, with support for one-key return to center.
  • Gesture Control: Control gimbal pan and tilt by swiping on the screen.
  • Remote Control Channel Control: Customize remote control channels for gimbal pan/tilt, photo, and video recording functions. Remote control channels can be viewed via 'Remote Control Assistant' -> 'Rudder Volume View'.

5.5.3 Correction of Pot Lid Effect

The 'pot lid effect' is calibrated at the factory. Do not attempt to calibrate it yourself unless necessary, and always contact Skydroid technicians first. The calibration method involves powering on the C13 for 5 minutes, selecting a flat, uniformly heated, frosted, low-reflectivity panel, moving the C13 close to cover the entire field of view, and then clicking 'Calibrate the Lid Effect'. Successful calibration results in a uniform gray screen.

5.5.4 Gimbal Calibration

This section includes 'Temperature', 'Horizontal', 'Vertical', and 'Pan tilt fine adjustment' calibrations. The gimbal's pan-tilt calibration is completed before leaving the factory. Do not click these options unless there are problems with the pan-tilt.

  • Temperature Calibration: Calibrates the gimbal's operating temperature to prevent abnormal operation due to temperature differences between the ambient environment and the IMU.
  • Horizontal Calibration: Place the gimbal on a horizontal plane, ensure it is stationary, and do not touch or shake it.
  • Vertical Calibration: After horizontal calibration, the gimbal pitches downwards. Ensure it is stationary, do not touch or shake it, then click 'Calibrate'.
  • Pan-tilt Fine-tuning: Fine-tune the horizontal and pitch axes.

5.5.5 Working Modes

You can set the gimbal to either 'Hoisting mode' or 'Flip mode'. Ensure the gimbal is correctly placed according to the selected mode to avoid motor damage.

5.5.6 Gimbal Speed

The gimbal control speed has two modes: 'Uniform speed mode' and 'Variable speed mode'.

5.5.7 Color Palette

Adjust the imaging effect of the thermal imaging camera. There are eleven options available, including 'White Hot', 'Sepia', 'Ironbow', 'Rainbow', 'Night', and 'Aurora'.

5.5.8 Laser Ranging

Click the ranging button to perform a single laser ranging. The effective ranging range is 5m to 1km.

5.6 Setting the Coding Mode

This section allows you to configure settings such as screen flipping, viewing the camera version number, and setting OSD (On-Screen Display) options. Other settings include hardware decoding, frame rate, GOP, IP settings, and bit rate.

5.7 Firmware Upgrade

You can upgrade both the gimbal firmware and camera firmware. It is crucial not to cut off power or exit the upgrade interface during the process. When upgrading the camera firmware, a TF card must be inserted into the C13.

6. Gimbal Dimensions and Angle Markings

The full manual includes detailed diagrams illustrating the gimbal's dimensions (e.g., 92mm height, 59mm length, 61mm width) and angle markings for pitch, yaw, and roll. These diagrams are essential for proper integration and understanding of the gimbal's physical characteristics and movement capabilities.

Due to version evolution and customer requirements, commands and controls may change. Please contact Skydroid Technology Co., Ltd. for the latest information and technical support. Product updates may also lead to changes in dimensions, weight, and other parameters.

7. Maintenance

  • Clean your device with a dry, soft cloth. Do not use thinners or harsh chemicals.
  • Ensure all cables are properly connected and not bent or damaged.
  • Avoid disassembling the device. If a malfunction occurs, contact professional repair services.

8. Troubleshooting

If you encounter any difficulties or abnormal operation with your Skydroid C13 gimbal, please refer to the official user manual for troubleshooting steps or contact Skydroid after-sales service directly. Do not attempt unauthorized repairs, as this may void your warranty and cause further damage.

9. User Tips

  • Compatibility Check: Before attempting to install the C13 camera on any drone, especially models from other brands like DJI, always verify compatibility with Skydroid's official documentation or support. The C13 is designed for specific integration, and not all drones may support its mounting or control interfaces.
  • Propeller Removal for Debugging: For safety, always remove the aircraft's propellers before powering on and debugging the gimbal, especially in environments with flammable substances or children.
  • Stable Power Supply: Ensure a stable power supply within the specified voltage range (7.2V-72V) to prevent operational issues or damage.

10. Frequently Asked Questions (FAQ)

Q: Is the Skydroid C13 camera compatible with DJI drone models?
A: The Skydroid C13 is designed for specific integration. While it is listed as 'Compatible Drone Brand: DJI' in some specifications, direct plug-and-play compatibility with all DJI models is not guaranteed. Users should verify specific model compatibility and required adapters or integration methods with Skydroid's technical support or official documentation before purchase and installation.

11. Warnings and Disclaimers

The content in this document pertains to your safety, legal rights, interests, and responsibilities. Read this document carefully to ensure correct product setup. Failure to comply with instructions and warnings may cause harm to you, others, and damage to the product or surrounding items. Skydroid Technology reserves the final right to interpret this document and all related materials. Updates may occur without prior notice; visit http://www.skydroid.xin/ for the latest information.

  • The C13 gimbal is factory-debugged for its camera and lens. Do not adjust the gimbal or change its mechanical structure, nor add other external devices. Disassembling the C13 may cause abnormal operation.
  • For safety, ensure the aircraft is in a safe state during gimbal debugging. Do not power on or debug in environments with flammable/explosive substances or where children are present. It is highly recommended to remove aircraft propellers before debugging.
  • Ambient temperature: -10°C to +60°C
  • Storage temperature: -25°C to +60°C
  • Atmospheric pressure: 86 kPa to 106 kPa
  • The use location should not have explosive media, corrosive gases, or conductive media. Avoid excessive water vapor and severe mold.
  • The use location should be equipped with facilities to protect against rain, snow, wind, sand, and dust.
  • Our company is not liable for direct or indirect losses or damages resulting from specific user usage, installation, modification, or misuse. Users bear the consequences of installing, assembling, or using Skydroid Technology products.

12. Warranty and Support

After-Sales Service Terms

These terms apply to products manufactured by Skydroid and sold by authorized dealers:

  1. If a quality problem (non-human factor) is verified within one week of purchase, Skydroid covers shipping for repair. Between one week and one year, user and Skydroid share shipping costs.
  2. Proof of purchase (voucher, warranty card, or online transaction record) is required for repairs.
  3. Within 7 days of purchase, if Skydroid products have quality problems (non-human, normal use, no appearance damage), users can negotiate free replacement of the same model with local dealers using the warranty card and purchase proof.
  4. Skydroid provides lifelong after-sales service. Non-human quality problems are guaranteed free of charge for one year. For man-made damage, modification, dismantling, or exceeding the one-year free warranty, users pay round-trip shipping and maintenance fees.
  5. To protect your rights, complete the warranty card and obtain a purchase voucher.
  6. Repaired products will be returned within 15 working days, with a repair report enclosed.
  7. These terms are limited to Skydroid products sold in Chinese Mainland. For Hong Kong, Macao, Taiwan, and overseas customers, send after-sales inquiries to sales01@skydroid.xin; specific rules apply.

Contact Information

Quanzhou Skydroid Technology National Service Hotline: 400-6996-520

Manufacturer: Quanzhou Skydroid Technology Co., Ltd.

Address: 2nd Floor, Building A, Haixi Incubation Base, High-tech Industrial Park, Quanzhou City, Fujian Province

Email: sales01@skydroid.xin

Website: www.skydroid.xin

Additional Resources: A user manual in PDF format is available for download. You can find it at https://manuals.plus/m/eadee1e95ab6b2b378dbea72a674c12c4bdb9aa95c99ef1a29edfe9d773dd336

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.