Transparent Electrostatic Wall Protective Film Transparent Electrostatic Wall Protective Film

Contents

Electrostatic Wall Protective Film User Manual

Model: Transparent Electrostatic Wall Protective Film

1. Product Overview

The Transparent Electrostatic Wall Protective Film is a versatile, self-adhesive PVC film designed to protect various smooth surfaces in your home. It offers a transparent barrier against oil, dirt, scratches, and moisture, making it ideal for kitchens, furniture, and other high-traffic areas. Its electrostatic adsorption allows for easy application and removal without damaging surfaces.

Hand peeling clear protective film from a tiled kitchen wall

The transparent film provides an invisible protective layer.

2. Specifications

Attribute Detail
Material PVC
Feature Self-Adhesive, Electrostatic Adsorption, Transparent, Waterproof, Oil-Proof, Scratch Resistant, Removable
High-Concerned Chemical None
Color Clear
Available Sizes 45cm x 1m, 45cm x 2m, 45cm x 3m, 45cm x 5m, 45cm x 10m, 60cm x 2m, 60cm x 5m
Origin Mainland China

3. Setup and Installation

Follow these steps for optimal application of the protective film:

  1. Preparation: Ensure the application surface is clean, dry, smooth, and free of grease or dust.
  2. Measurement & Cutting: Measure the desired area and cut the film to size, leaving a small excess for precise alignment.
  3. Application: Peel off a small portion of the backing paper. Carefully align the film and gradually smooth it onto the surface using a squeegee or a soft cloth. Work from the center outward to remove any air bubbles.
  4. Finishing: Once fully applied, firmly smooth the entire surface. Trim any excess edges with a sharp blade for a clean finish.
  5. Reinforce Corners: For enhanced adhesion, especially on corners, apply gentle pressure for 2-3 days to allow the electrostatic adsorption to strengthen.
Six-step installation guide for wall protective film

Visual guide for the installation process.

Important Limitations:

  • For indoor use on smooth, non-porous surfaces only (e.g., glass, metal, smooth plastics, laminates).
  • Not suitable for textured, uneven, or frequently wet surfaces (e.g., rough walls, shower areas).
  • Caution: This product is not heat resistant. Avoid application near stoves, ovens, or other high-temperature sources to prevent damage or degradation of the film.
  • Not intended for permanent installation. May leave minimal residue upon removal, which can be cleaned with an appropriate adhesive remover.

4. Operating and Benefits

The electrostatic wall protective film provides a durable and easy-to-maintain barrier for various surfaces.

  • Oil and Water Resistance: Effectively repels oil splatters and water, making it ideal for kitchen backsplashes and other areas prone to spills.
  • Scratch and Impact Protection: Guards against scratches, scuffs, and minor impacts, protecting walls and furniture from daily wear and tear, including children's scribbles or pet damage.
  • Moisture and Mildew Prevention: Helps prevent moisture absorption and mildew growth on protected surfaces.
  • Easy to Clean: Surfaces covered with the film can be easily wiped clean, simplifying maintenance.
  • Residue-Free Removal: Designed for easy removal without leaving sticky residue or damaging the underlying surface.
Hand wiping oil splatter from the protective film on a tiled kitchen wall

The film makes cleaning oil and dirt effortless.

A dog next to a wall protected by the film, illustrating protection from pet messes

Protects walls from pet-related messes.

5. Maintenance and Care

Cleaning:

  • After application, wait at least 24-48 hours before cleaning the film.
  • Clean only with a soft, damp cloth and a mild, non-abrasive detergent.
  • Do not use abrasive pads, scouring powders, or harsh chemicals, as these can damage the film surface.

General Maintenance:

  • Avoid prolonged direct sunlight exposure to prevent fading or degradation of the adhesive properties.
  • Do not use sharp objects on the film surface to avoid scratches or punctures.

Removal:

To remove the film, slowly peel it from one corner. If the adhesive is strong, gently apply low heat (e.g., from a hairdryer) to soften the adhesive, making removal easier. Clean any remaining residue with an appropriate adhesive remover.

6. Troubleshooting

  • Film not adhering properly:
    • Ensure the surface is perfectly clean, dry, and free of dust or grease before application.
    • Verify that the surface is smooth and non-porous. The film is not suitable for textured, uneven, or frequently wet surfaces.
    • Re-apply, ensuring all air bubbles are smoothed out during the process.
  • Film showing signs of damage or degradation:
    • Check if the film has been exposed to high temperatures, such as near stoves or ovens, as it is not heat resistant.
    • Avoid using sharp objects on the film surface.
    • Ensure the film is not exposed to prolonged direct sunlight, which can cause fading or adhesive degradation.
  • Residue left after removal:
    • Use an appropriate adhesive remover to gently clean any remaining residue from the surface.
    • Applying low heat (e.g., with a hairdryer) during removal can help minimize residue.

7. User Tips

  • For large areas, consider having a second person assist with application to ensure straight alignment and minimize bubbles.
  • When smoothing out bubbles, a credit card wrapped in a soft cloth can serve as an effective squeegee.
  • If applying to a kitchen backsplash, ensure the area is completely degreased for best adhesion.
  • The film can be cut into custom shapes or sizes to fit specific areas, offering versatile protection.

8. Safety Information and Compliance

Safety Warnings:

  • CHOKING HAZARD: Small parts. Not for children under 3 years. Keep the product and its packaging out of reach of young children.
  • Avoid applying the film near open flames or high-heat sources due to its non-heat resistant nature.

Compliance:

This product has obtained CE certification and complies with the requirements of relevant EU directives and harmonized standards.

CE Mark:

CE

9. Warranty and Support

This product is sold by Stone's Store via AliExpress. For any product-related inquiries or support, please contact the seller directly through the AliExpress platform.

A digital version of the user manual (PDF) is available for download. Please refer to the product page for the link.

No specific warranty information is provided for this product. Please refer to AliExpress's general return and refund policies for details.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.