CHANTOWER Pure Sine Wave Inverter Series

Contents

CHANTOWER Pure Sine Wave Inverter User Manual

Model Series: 1000W-6000W DC 48V/72V to AC 220V

1. Introduction

This manual provides detailed instructions for the correct use and operation of your CHANTOWER Intelligent Power Inverter. Please read it carefully before use to ensure proper functionality and safety.

Product Features

  • Lightweight and compact design for portability.
  • High efficiency and low operating noise.
  • Adopts efficient SPWM Pulse Width Control Technology.
  • Utilizes multiple high-tech and intelligent driver chips.
  • SMT Chip Mounting Technology for precise control, high reliability, and low failure rate.
  • High conversion rate, strong load capacity, and wide application range.
  • Multiple intelligent security protections with complete protection functions.
  • Pure sine wave output, safe and stable for sensitive devices.
CHANTOWER 5000W Pure Sine Wave Inverter
Figure 1: CHANTOWER 5000W Pure Sine Wave Inverter (Example Model)

2. Safety Precautions and Usage Environment

To ensure safety and optimal performance, observe the following guidelines:

Usage Environment Requirements

  • Dry Environment: Do not immerse the inverter in water or expose it to rain.
  • Temperature Conditions: Operate in a cool place with a temperature between 0°C and 40°C.
  • Space Conditions: Do not use the power inverter in a narrow space. Ensure adequate ventilation and do not cover the machine during use.

Important Considerations

  • Overload Protection: When starting appliances with high peak power (e.g., refrigerator compressors, motors), the inverter may trigger overload protection. Turn off all electrical switches first, then turn on the inverter switch, and finally turn on electrical appliances one by one, starting with the highest peak power appliance.
  • Battery Voltage Monitoring: During use, if the battery voltage drops (e.g., 10.4-11.0V for a 12V battery), an alarm will sound. Turn off sensitive electrical appliances promptly. The inverter will stop outputting current if the voltage drops further (e.g., 9.7-10.3V), and the red indicator light will illuminate.
  • Battery Maintenance: Start the vehicle or charge the battery in a timely manner to prevent battery depletion and prolong battery life.
  • Overvoltage Protection: Although the inverter has overvoltage protection, exceeding the specified input voltage (e.g., above 15.5V for 12V systems, 31V for 24V, 62V for 48V, 80V for 60V/72V) can still damage the inverter.
  • Heat Management: After continuous use, the inverter's surface temperature may rise. Ensure smooth airflow and keep it away from objects susceptible to high temperatures.
  • Child Safety: This power inverter is prohibited for use by minors.

3. Product Components

Familiarize yourself with the main components of your inverter:

Inverter LCD Display and Ports
Figure 2: Inverter Front Panel and LCD Display Details
  • Indicator Light: Green for normal operation, Red for protection status (e.g., overload, low voltage).
  • Universal Shaped Socket: AC output ports for connecting appliances.
  • Independent Switch: ON/OFF switch for the inverter.
  • Input Terminal Positive Terminal (Red): Connects to the positive (+) terminal of the DC power source.
  • Input Negative Terminal (Black): Connects to the negative (-) terminal of the DC power source.
  • Efficient Cooling Fan: Automatically activates to dissipate heat.
  • Multi-function LCD Display Screen: Shows real-time information such as battery level, frequency, output voltage, temperature, power, and input voltage.
Upgraded LCD Display
Figure 3: Upgraded LCD Display showing real-time status.
Internal Components of the Inverter
Figure 4: Internal view of the inverter circuit board, highlighting key components like transformers and capacitors.

4. Setup and Connection

Connecting to a Battery

Attention: The battery voltage must be the same as the inverter's input voltage (e.g., a 48V inverter requires a 48V battery bank). Multiple batteries can be used in parallel or series to achieve the required voltage and capacity.

Battery Connection Diagram
Figure 5: Basic 12V Battery Connection to Inverter. For 48V/72V inverters, ensure the battery bank matches the inverter's input voltage.

For higher voltage systems (e.g., 24V, 48V, 60V, 72V), batteries must be connected in series to achieve the correct input voltage for the inverter. Ensure all connections are secure and use appropriately sized wiring.

Battery Series Connection Diagrams
Figure 6: Diagrams for connecting batteries in series to achieve 24V, 48V, 60V, and 72V input for the inverter.

Connection Method for Car Cigarette Lighters

Attention:

  1. Choose an inverter equipped with a car cigarette lighter model for this method.
  2. The cigarette lighter output can only carry electrical appliances with a load of less than 150W. If the load exceeds 150W, please follow the battery connection method (Section 4.1).

Connection Method for Electric Motorcycles

Attention: Generally, the voltage of four batteries for an electric motorcycle is 48V, and five batteries is 60V. The specific voltage should be marked on the electric motorcycle. Select an inverter with the same voltage as the electric vehicle.

Inverter in use with RV
Figure 7: Inverter powering devices in an outdoor setting.

5. Operating Instructions

  1. Place the inverter switch in the OFF position and ensure good contact with the battery terminals.
  2. Confirm that the continuous power of all electrical appliances is within the continuous power range of the inverter. The peak power of inductive load electrical appliances should not exceed the peak power marked by the inverter.
  3. Plug the electrical appliance into the 220V output socket of the inverter.
  4. Turn on the switch of the power inverter. The green indicator light will illuminate, indicating normal operation.
  5. If the red indicator light illuminates, it indicates that the inverter is turned off due to overvoltage, undervoltage, overload, or overheating.
  6. In many cases, due to the limited output of the vehicle's cigarette lighter socket, the inverter may alarm or shut down. In this case, as long as the vehicle is started or the power consumption is reduced, normal operation can be restored.

6. Main Technical Parameters and Specifications

General Specifications
ParameterValue
Output VoltageAC 220V ±10%
Current Frequency50Hz / 60Hz
Output WaveformPure Sine Wave
Input VoltageDC 48V / 72V (General range: 20V-109V)
Conversion Efficiency>90%
Socket TypeUniversal
Built-in Fuse10A/15A/20A/40A/70A/120A/240A (varies by model)
No-load Current< 0.3A
Under Voltage Alarm (e.g., 12V system)10.4-11.0V
Low Pressure Shutdown (e.g., 12V system)9.7-10.3V
Overpressure Shutdown (e.g., 12V system)14.5-15.5V
Package Length37 cm
Package Width20 cm
Package Height14 cm
Package Weight2.8 kg

Power Ratings by Model

Please note that the continuous power is the actual usable power, while peak power is a momentary surge capacity.

Model (Advertised)Continuous PowerPeak Power
1000W500W1000W
1600W800W1600W
3000W1500W3000W
4000W1600W4000W
5000W2000W5000W
6000W2500W6000W
Inverter Model Specifications Table
Figure 8: Detailed specifications for various inverter models, including rated power, peak power, output frequency, voltage, and dimensions.
Inverter Quality Comparison
Figure 9: Comparison highlighting the difference between general inverters with "virtual power" and pure sine wave inverters with "full power carry weight."

7. Troubleshooting

This section outlines common issues and their resolutions.

Abnormal PhenomenonReasonResolution Method
Indicator Light is OFF, and the machine is not working.Poor contact at the wiring.Check and tighten all connecting wires and connections.
Indicator Light is RED, and the electrical appliance is not working.Battery discharged (alarm).Charge or replace the battery.
Indicator Light is RED, and the electrical appliance is not working.Poor ventilation, causing overheating shutdown.Turn off the machine, cool down for 15 minutes, remove items around the fan and converter, place the inverter in a cool place, reduce the use of electrical appliances as required, and restart.
Output voltage is too low.Input voltage too high.Check the working status of the charging system.
Output voltage is too low.The measured output voltage of the correction wave inverter is too low.Measure the output data of the correction wave inverter using a "true RMS multimeter" to obtain accurate data.
Inverter emits undervoltage or over-temperature buzzing alarm sound.Lower ventilation conditions, temperature protection.Improve the machine's placement in a cool place, and reduce the use of electrical appliances as required.
Battery usage time is too short.Poorly or damaged battery.Replace the battery.
Battery usage time is too short.The electricity stored in the charger cannot fully charge the appliance.Replace it with a better intelligent charger.
Battery usage time is too short.Current flow reduces the length of the wire and uses thinner wires.Reduce the length of the wire and use thicker wires.

8. Maintenance

Proper maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Regularly clean the exterior of the inverter with a dry, soft cloth. Ensure ventilation openings are free from dust and debris to maintain efficient cooling.
  • Storage: When not in use for extended periods, store the inverter in a cool, dry place, away from direct sunlight and moisture.
  • Wiring Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion. Ensure battery terminals are clean and secure.
  • Avoid Obstructions: Always ensure that the cooling fan and ventilation slots are not obstructed during operation.
Inverter Cooling Features
Figure 10: Inverter features including Smart Fan and Temperature Control for efficient cooling.

9. User Tips

  • Verify Continuous Power: Always match the continuous power rating of your inverter to the continuous power requirement of your appliance. While the inverter has a peak power capacity, sustained loads should not exceed the continuous power.
  • Wiring Quality: Some users have noted that connection wires can be thin. For optimal performance and safety, especially with higher loads, consider inspecting and potentially upgrading your connection wires to thicker gauges to minimize resistance and prevent overheating.
  • Appliance Compatibility: While the inverter is widely compatible, it is generally not suitable for high-power inductive loads like induction cookers, microwave ovens, high-power hair dryers, and high-power air conditioners, even if their peak power might seem to fit. Always check the continuous power rating.
User-provided image of 1600W inverter and battery clamps
Figure 11: Example of a 1600W inverter with included battery clamps.
User-provided image of inverter internal wiring
Figure 12: Internal wiring of an inverter, showing components and connections.

10. Warranty and Support

Warranty Terms

This product comes with a three-year warranty. To ensure after-sales service, customers must strictly follow the instructions provided in this manual.

  • Product Exchange Application: Accessories must be complete and not affect secondary sales. Missing relevant accessories may result in deductions based on the factory price.
  • Product Warranty / Application:
    • If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired or replaced free of charge.
    • If quality problems arise due to unauthorized opening or modification, maintenance will be charged.
  • Paid Maintenance:
    • If the machine casing is too dirty or old, or used in harsh environments resulting in product damage, maintenance will be charged.
    • For high-power machine casings that are severely scratched, dirty, or old, they should be returned to the factory for repair. After being repaired within the warranty period, the machine will be returned to the customer in its original condition and repaired for free.
    • For machines that have been modified or unpacked without permission, any malfunctions will be subject to paid maintenance. Please contact customer service for specific costs.
  • Service Process: After receiving the relevant fees (if applicable), we will promptly handle the after-sales service and deliver the product to the customer.

Contact Support

For returns, exchanges, or any other support inquiries, please contact customer service. You may also refer to the official user manual PDF for additional details: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.