Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya WiFi Bluetooth Smart Door Window Sensor. This device is designed to enhance your home security by providing real-time alerts and remote monitoring capabilities for doors, windows, cabinets, and drawers. It integrates seamlessly with smart home platforms like Amazon Alexa and Google Home.
Please read this manual carefully before use and keep it for future reference. The network should be shifted to 2.4GHz, not 5GHz, when pairing with devices.

Package Contents
- 1 × Smart Door/Window Sensor (Main Unit)
- 1 × Magnetic Part
- 1 × 3M Adhesive Tape
- 1 × User Manual

Specifications
| Feature | Specification |
|---|---|
| Product | WiFi Smart Door/Window Sensor |
| Input Voltage | DC 3V (2x AAA batteries, not included) |
| Low Power Under Voltage | 2.4V |
| WiFi Standard | 802.11b/g/n (2.4GHz only) |
| Connection Mode | WiFi 2.4GHz + Bluetooth Dual Mode |
| Magnetic Control Distance | ≤20mm |
| Operating Temperature | -10°C ~ +50°C |
| Working Humidity | Up to 95% RH |
| Static Current | ≤35uA |
| Alarm Current | ≤135mA |
| APP Compatibility | Tuya Smart / Smart Life |
| Smart Home Platform | Alexa, Google Assistant |
| Certifications | CE, FCC, RoHS |


Setup Guide
1. Battery Installation
- Push the mounting bracket upward and take out the bracket.
- Insert two AAA batteries (not included) into the battery compartment, ensuring correct polarity.
- Replace the mounting bracket.
2. App Installation & Pairing (WiFi)
- Download the Smart Life App or Tuya Smart App from your app store. You can scan the QR codes provided in the app for direct download.
- Register an account or log in if you already have one.
- Ensure your mobile phone is connected to a 2.4GHz WiFi network (5GHz is not supported). Bluetooth is advised to be open when adding devices.
- In the app, navigate to the 'My Home' interface or tap 'Add Device'.
- Select 'Add Manually' and choose 'Contact Sensor' under 'Security & Video Surveillance'.
- Press and hold the button on the sensor for 5 seconds until the blue LED blinks rapidly.
- Input your 2.4GHz WiFi network name and password.
- Wait for the connection to complete. The app will confirm successful pairing.

3. Physical Installation
- Clean the surface where you intend to install the sensor.
- Peel off the protective film from the 3M adhesive tape on both the main sensor unit and the magnetic part.
- Attach the main sensor unit to the door/window frame and the magnetic part to the door/window itself.
- Ensure the gap between the main unit and the magnetic part is less than or equal to 20mm when the door/window is closed.
- Test the sensor by opening and closing the door/window to verify that the app receives alerts.


Operating Instructions
Real-time Monitoring & Alerts
Once installed and connected, the sensor will detect the open/closed status of your door or window. The app will provide real-time notifications and a history log of all open/close events. This allows you to monitor your home's security from anywhere.

Smart Home Integration
The sensor is compatible with Amazon Alexa and Google Assistant. You can integrate it into your smart home routines to create intelligent scenarios. For example, you can set up an automation where the living room lights turn on automatically when the door is opened at night.

Low Power Alarm
The sensor features a low power design for extended battery life. When the battery level is low, the app will prompt you to replace the batteries in time to ensure continuous protection.

Maintenance
Battery Replacement
When the app indicates a low battery, replace the two AAA batteries. To do this, push the mounting bracket upward, remove the old batteries, insert new ones with correct polarity, and reattach the bracket.

Troubleshooting
Indicator Light Issues
- How to set indicator light as rapid flashing?
- Power on the device, then power off after 5 seconds, and then power on again.
- Hold the reset button for 5 seconds.
- Confirm the indicator light is now rapidly flashing.
- How to set indicator light as slow flashing?
- Follow steps a-c above to achieve rapid flashing.
- Rehold the reset button for 5 seconds until the indicator light is slowly flashing.
If the newly added device stays offline for a long time, please check the LED status and your WiFi connection. Ensure your mobile phone and the gateway (if applicable for Zigbee/Sigmesh) are under the same 2.4GHz Wi-Fi network.
User Tips
- Custom Automations: Utilize the app's automation features to create custom scenarios, such as turning off the air conditioner if a door is left open for a specified duration. This can help save energy.
- Battery Life: While the sensor has a low power design, battery life can vary. Monitor the battery status in the app and replace AAA batteries as needed.
- Placement: The sensor can be used on various entry points like doors, windows, cabinets, and drawers. Ensure the two parts are within 20mm for accurate detection.
- Notifications: If you are not receiving notifications, ensure the app is running in the background and that notification permissions are enabled for the app on your smartphone.
Warranty and Support
For any issues or questions regarding your Smart Door Window Sensor, please refer to the official product page or contact customer support. Keep your purchase receipt for warranty claims.
A detailed user manual in PDF format is available for download: View User Manual (PDF)
