Introduction
Thank you for choosing the TIYPEOR 70mm RGB LED Logo Light Angel Eyes. This product is designed to enhance the aesthetic and visibility of your motorcycle with vibrant, customizable lighting. Featuring a robust, waterproof design and easy control, these lights are a perfect addition for enthusiasts. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED lights.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | TIYPEOR |
| Origin | Mainland China |
| Waterproof Rating | IP68 |
| Size | 70mm (Diameter) |
| Compatibility | For BMW (e.g., GS1250 Logo) |
| Battery Included | No |
| Cable Length (approx.) | 60cm and 50cm |
| Package Dimensions (L x W x H) | 23cm x 13cm x 16cm |
| Package Weight | 0.5 kg |
The product is designed to be waterproof and dustproof, ensuring durability in various weather conditions.
Setup and Installation
Before installation, ensure your motorcycle's engine is off and cool. It is recommended to disconnect the battery to prevent electrical shorts.
Package Contents:
- 2 x 70mm LED Light Rings
- 1 x Wiring Harness with Control Box
Installation Steps:
- Prepare the Mounting Area: Identify the location where you intend to install the LED rings, typically around the motorcycle's logo or other suitable areas. Ensure the surface is clean and dry.
- Measure and Verify Fit: Before proceeding, measure the diameter of your motorcycle's logo or intended mounting area to confirm compatibility with the 70mm LED rings.
- Connect Wiring (RGB Version): Refer to the wiring diagram below for the RGB version. Connect the wires as follows:
- Positive pole (brake light flash): Connect this wire to your motorcycle's brake light circuit if you desire a flashing effect when braking.
- Positive pole (Yellow light A): Connect this wire to the appropriate power source for yellow light functionality.
- Positive pole (Yellow light B): Connect this wire to the appropriate power source for additional yellow light functionality.
- Negative pole: Connect this wire to a suitable ground point on your motorcycle.
- Bluetooth control Lighting mode: This control box manages the RGB lighting modes via Bluetooth. Ensure it is securely mounted in a dry location.

Wiring diagram for the TIYPEOR 70mm RGB Logo Light, showing connections for positive pole (brake light flash), positive pole (yellow light A), positive pole (yellow light B), negative pole, and Bluetooth control lighting mode. Cable lengths are 60cm and 50cm. - Connect Wiring (Yellow/White Version): If you have the Yellow/White version, refer to its specific wiring diagram. Connect the wires as follows:
- Positive pole (White Light): Connect this wire to the appropriate power source for white light functionality.
- Positive pole (Yellow light A): Connect this wire to the appropriate power source for yellow light functionality.
- Positive pole (Yellow light B): Connect this wire to the appropriate power source for additional yellow light functionality.
- Negative pole: Connect this wire to a suitable ground point on your motorcycle.

Wiring diagram for the TIYPEOR 70mm Yellow/White Logo Light, showing connections for positive pole (white light), positive pole (yellow light A), positive pole (yellow light B), and negative pole. Cable lengths are 60cm and 50cm. - Secure the Lights: Once wiring is complete, securely attach the LED rings to your desired location. Ensure all connections are tight and insulated to prevent water ingress.
- Test Functionality: Reconnect the battery and test all lighting functions to ensure correct operation.
Note: Professional installation is recommended, especially if you are unfamiliar with motorcycle electrical systems.
Operating Instructions
The RGB version of the TIYPEOR Logo LED Lights features Bluetooth control for dynamic lighting effects. The Yellow/White version offers standard illumination.
RGB Version (with Bluetooth Control):
- Power On: Turn on your motorcycle's ignition to power the LED lights.
- Connect via Bluetooth: Use your smartphone to connect to the LED light's Bluetooth control module. The specific app or connection method will be detailed in the supplementary user manual (PDF).
- Select Lighting Mode: Through the Bluetooth app, you can choose from a variety of colors, brightness levels, and dynamic lighting patterns (e.g., flashing, fading, color cycling).
- Brake Light Function: If connected to the brake light circuit, the lights will flash when the brake is applied, enhancing visibility.
Yellow/White Version:
The Yellow/White version operates based on its wiring connections. Depending on how it's wired, it will illuminate in white or yellow. There is no Bluetooth control for this version.
Visual Examples of Lighting:





Maintenance
The TIYPEOR LED Logo Lights are designed to be waterproof (IP68 rated) and dustproof, requiring minimal maintenance.
- Cleaning: Periodically wipe the surface of the LED rings with a soft, damp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or the LED components.
- Inspection: Regularly inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure all connections remain secure.
- Storage: If storing the motorcycle for an extended period, ensure the lights are clean and dry.
Troubleshooting
- Lights Not Turning On:
- Check all wiring connections to ensure they are secure and correctly connected to the power source and ground.
- Verify that the motorcycle's ignition is on and providing power to the lights.
- Inspect for any blown fuses in the circuit.
- Inconsistent Lighting/Flickering:
- Check for loose or corroded wiring connections.
- Ensure the power supply is stable and within the product's operating voltage.
- Bluetooth Connection Issues (RGB Version):
- Ensure your smartphone's Bluetooth is enabled and within range of the control module.
- Restart the Bluetooth app and try reconnecting.
- Verify that the control module is receiving power.
- Lights Falling Off:
- Ensure the mounting surface is clean and dry before attachment.
- Use appropriate adhesive or mounting hardware for a secure fit.
- Verify the product size matches the intended mounting area.
User Tips
- Professional Installation: While installation can be done by yourself, the seller recommends professional installation if you are not comfortable with motorcycle electrical systems.
- Verify Fitment: Always measure the diameter of your motorcycle's logo or intended mounting area to ensure the 70mm lights will fit correctly. Some users have reported issues with fitment if not properly checked.
- Secure Packaging: The product typically arrives in a very well-packaged box, ensuring its safety during transit.
Frequently Asked Questions (FAQ)
- Q: Do you sell BMW covers for the BMW GS1250 that fit on the sides of the motorcycle, handlebars, and central covers of the rear wheel on the swingarm?
- A: You can first measure the diameter of your car logo and then select this product. This product is a 70mm LED light ring.
- Q: Is the wiring diagram provided?
- A: Yes, a wiring diagram is provided with the product.
- Q: Is it easy to install by yourself?
- A: It is recommended to go to a repair shop for installation; it's inconvenient to install it yourself if you lack experience.
Warranty and Support
TIYPEOR Warranty:
TIYPEOR represents and warrants to the first end-user (“End-User”) of the Product that the Product shall materially conform to TIYPEOR’s published specifications in the user manual, subject to the terms and conditions below.

Warranty Period:
The Warranty Period for a new Product is One Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.
What is Covered:
The Standard Warranty provides support from TIYPEOR (“support”) as well as replacement parts and shipping costs during the Warranty Period. Customers will be covered for “replacements parts”, “partial refund”, “full refund” in the Warranty Period on any product due to manufacturing defects of components or workmanship.
What is Not Covered:
The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environmental, unusual physical or electrical stress or interference, exposure to flooding, fire or electrical problems associated with incoming power or other acts not the fault of TIYPEOR. The Warranty does not cover accessory parts. TIYPEOR is not responsible for damage arising from end-user error and failure to follow instructions relating to Product’s use.
Customer Support:
If you have any questions about the products or need to request a replacement part, please contact our customer support. You can reach us by phone, email, or through our Live Support system. For detailed item guides and documents, including a user manual in PDF format, please refer to the product page or contact support.